NSF Product and Service Listings
These NSF Official Listings are current as of Tuesday, May 14, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=36840&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
| The Euclid Chemical Company | |
| 19215 Redwood Road | |
| Cleveland, OH 44110 | |
| United States | |
| 800-321-7628 | |
| 216-531-9222 | |
| Visit this company's website |
Facility : Fontana, CA
Protective (Barrier) Materials
| Water | Water | |||
| Water Contact | Contact | Contact | ||
| Trade Designation | Size Restriction | Temp | Material | |
|
Concrete Admixtures |
||||
| Accelguard NCA[1] | [2] | CLD 23 | CMNT | |
| Eucon AEA-92[3] | [4] | CLD 23 | CMNT | |
| Eucon AEA-92S[5] | [4] | CLD 23 | CMNT | |
| Eucon Stasis[6] | [2] | CLD 23 | CMNT | |
| Eucon WR-91[7] | [4] | CLD 23 | CMNT | |
| Eucon X-15[8] | [2] | CLD 23 | CMNT | |
| Plastol 6400[9] | [10] | CLD 23 | CMNT | |
| Plastol 6420[11] | [9] | CLD 23 | CMNT | |
[1] Certified for a maximum use level of 75 oz/100 lbs cement.
[2] Certified for use in tanks 1000 gallons and greater, pipe and fittings 4" and greater.
[3] Certified for a maximum use level of 1 oz/100 lbs cement.
[4] Certified for pipes 4" and greater, tanks 1000 gallons and greater.
[5] Certified for a maximum use level of 2 oz/100 lbs cement.
[6] Certified for a maximum use level of 16 oz/100 lbs cement.
[7] Certified for a maximum use level of 6 oz/100 lbs cement.
[8] Certified for a maximum use level of 15 oz/100 lbs cement.
[9] Certified for pipes 8" and greater, tanks 1000 gallons and greater, fittings 4" and
greater.
[10] Certified for a maximum use level of 8 oz/100 lbs cement.
[11] Certified for a maximum use level of 12 ox/100 lbs cement.
|
||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Odessa, FL
Joining and Sealing Materials
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Patching Materials[1] [2] [3] |
||||
| EucoRepair V100 | [4] | CLD 23 | CMNT | |
[1] Mix ratio is 46 lbs. EucoRepair V100 to 3.79 L of water.
[2] Certified for a 7 day moist cure at 73°F +/- 3°F (100% relative humidity) followed by
1-3 day air cure at 73°F +/- 3°F (50% relative humdity). Maximum application thickness
is 2".
[3] Certification does not include Duralprep AC primer or Eucobar evaporation retarder.
[4] Certified for up to 10% of the surface area of tanks 100,000 gallons and greater. 25%
of the surface area of tanks 1,500,000 gallons and greater. 6% of 120" pipe and greater
and 25% of 10" fittings and greater.
|
||||
Protective (Barrier) Materials
| Water | Water | |||
| Water Contact | Contact | Contact | ||
| Trade Designation | Size Restriction | Temp | Material | |
|
Coatings - Fittings[1] |
||||
| Tamoseal Gray | >= 4" | CLD 23 | CMNT | |
| Tamoseal Gray N | >= 4" | CLD 23 | CMNT | |
| Tamoseal White | >= 4" | CLD 23 | CMNT | |
| Tamoseal White N | >= 4" | CLD 23 | CMNT | |
[1] Colors: Gray, White
Number of Coats: 2
Maximum Field Use Dry Thickness (in mils): 125 mils
Recoat Cure Time and Temperature: 12 hours at 40°F
Final Cure Time/Temperature: 7 days at 40°F
Special Comments: Akkro-7T or Flex-Con additives are mixed 1:3 (additive: water) as the
mixing liquid and then used at 2 gal per 50 lb Tamoseal. Induction time is 10 minutes.
|
||||
|
Coatings - Pipe[1] |
||||
| Tamoseal Gray | >= 48" | CLD 23 | CMNT | |
| Tamoseal Gray N | >= 48" | CLD 23 | CMNT | |
| Tamoseal White | >= 48" | CLD 23 | CMNT | |
| Tamoseal White N | >= 48" | CLD 23 | CMNT | |
[1] Colors: Gray, White
Number of Coats: 2
Maximum Field Use Dry Thickness (in mils): 125 mils
Recoat Cure Time and Temperature: 12 hours at 40°F
Final Cure Time/Temperature: 7 days at 40°F
Special Comments: Akkro-7T or Flex-Con additives are mixed 1:3 (additive: water) as the
mixing liquid and then used at 2 gal per 50 lb Tamoseal. Induction time is 10 minutes.
|
||||
|
Coatings - Tank[1] |
||||
| Tamoseal Gray | >= 3000 gal. | CLD 23 | CMNT | |
| Tamoseal Gray N | >= 3000 gal. | CLD 23 | CMNT | |
| Tamoseal White | >= 3000 gal. | CLD 23 | CMNT | |
| Tamoseal White N | >= 3000 gal. | CLD 23 | CMNT | |
[1] Colors: Gray, White
Number of Coats: 2
Maximum Field Use Dry Thickness (in mils): 125 mils
Recoat Cure Time and Temperature: 12 hours at 40°F
Final Cure Time/Temperature: 7 days at 40°F
Special Comments: Akkro-7T or Flex-Con additives are mixed 1:3 (additive: water) as the
mixing liquid and then used at 2 gal per 50 lb Tamoseal. Induction time is 10 minutes.
|
||||
Facility : Cleveland, OH
Joining and Sealing Materials
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Patching Materials[1] [2] [3] |
||||
| Carbocrete 4010 | [4] | CLD 23 | CMNT | |
| EucoRepair V100 | [4] | CLD 23 | CMNT | |
[1] Mix ratio is 46 lbs. EucoRepair V100 to 3.79 L of water.
[2] Certified for a 7 day moist cure at 73°F +/- 3°F (100% relative humidity) followed by
1-3 day air cure at 73°F +/- 3°F (50% relative humidity). Maximum application thickness
is 2".
[3] Certification does not include Duralprep AC primer or Eucobar evaporation retarder.
[4] Certified for up to 10% of the surface area of tanks 100,000 gallons and greater, 25% of
the surface area of tanks 1,500,000 gallons and greater, 6% of 120" pipe and greater and
25% of 10" fittings and greater.
|
||||
Protective (Barrier) Materials
| Water | Water | |||
| Water Contact | Contact | Contact | ||
| Trade Designation | Size Restriction | Temp | Material | |
|
Coatings - Tank |
||||
| Vandex BB 75[1] | >= 10,000 gal. | CLD 23 | CMNT | |
| Vandex Super[2] | >= 2000 gal. | CLD 23 | CMNT | |
| Vandex Super White[3] | >= 2000 gal. | CLD 23 | CMNT | |
[1] Colors: Gray
Number of Coats: 1 - 2
Maximum Field Use Dry Film Thickness (in mils): 200
Recoat Cure Time and Temperature: 2 - 4 hours at 73°F while the first coat is still
green.
Final Cure Time and Temperature: 5 days damp cure at 73°F
Special Comments: Mix ratio of Vandex BB 75 to water is 55 lbs:1.3-1.5 gal; induction
period is 3 minutes
[2] Colors: Cement gray
Number of Coats: 1 - 2
Recoat Cure Time and Temperature: Second coat is applied while the first coat is still
green (approximately 20-30 minutes at 72°F)
Final Cure Time and Temperature: 5 days damp cure at 72°F
Special Comments: Apply to concrete at a rate of 1.5 kg per square meter. Mix ratio of
Vandex Super to water is 5:2 by volume; induction period is 3 minutes
[3] Colors: White
Number of Coats: 1 - 2
Recoat Cure Time and Temperature: Second coat is applied while the first coat is still
green (approximately 80-90 minutes at 72°F)
Final Cure Time and Temperature: 5 days damp cure at 72°F
Special Comments: Apply to concrete at a rate of 1.5 kg per square meter. Mix ratio of
Vandex Super White to water is 5:2 by volume; induction period is 3 minutes
|
||||
|
Concrete Admixtures |
||||
| Conex | [4] | CLD 23 | CMNT | |
| Eucon Vandex AM-10 | [5] | CLD 23 | CMNT | |
[4] Certified for a maximum use level of 10% by weight cement. Certified for use in tanks
1000 gallons and greater, pipes 12" and greater, and fittings 4" and greater.
[5] Certified for a level not to exceed 2% by weight of cement. Certified for use in tanks
1,000 gallons and greater and pipes and fittings 8" and greater.
|
||||
Facility : Easton, PA
Protective (Barrier) Materials
| Water | Water | |||
| Water Contact | Contact | Contact | ||
| Trade Designation | Size Restriction | Temp | Material | |
|
Concrete Admixtures |
||||
| Accelguard NCA[1] | [2] | CLD 23 | CMNT | |
| Accelguard® 80[3] | [4] | CLD 23 | CMNT | |
| Eucon 1037[5] | [6] | CLD 23 | CMNT | |
| Eucon AEA-92[7] | [6] | CLD 23 | CMNT | |
| Eucon AEA-92S[8] | [6] | CLD 23 | CMNT | |
| Eucon Air MAC12[9] | [2] | CLD 23 | CMNT | |
| Eucon Air MAC6[9] | [2] | CLD 23 | CMNT | |
| Eucon MR[10] | [6] | CLD 23 | CMNT | |
| Eucon Retarder 75[11] | [6] | CLD 23 | CMNT | |
| Eucon Stasis[12] | [2] | CLD 23 | CMNT | |
| Eucon WR-91[13] | [6] | CLD 23 | CMNT | |
| Plastol 6400[14] | [15] | CLD 23 | CMNT | |
| Plastol 6420[16] | [15] | CLD 23 | CMNT | |
[1] Certified for a maximum use level of 75 oz/100 lbs cement.
[2] Certified for tanks 1000 gallons and greater and pipe and fittings 4" and greater.
[3] Certified for a maximum use level of 32 oz/100 lbs cement.
[4] Certified for pipes 8" and greater, tanks 1000 gallons and greater.
[5] Certified for a maximum use level of 25 oz/100 lbs cement.
[6] Certified for pipes 4" and greater, tanks 1000 gallons and greater.
[7] Certified for a maximum use level of 1 oz/100 lbs cement.
[8] Certified for a maximum use level of 2 oz/100 lbs cement.
[9] Certified for a maximum use level of 4 oz/100 lbs cement.
[10] Certified for a maximum use level of 10 oz/100 lbs cement.
[11] Certified for a maximum use level of 5 oz/100 lbs cement.
[12] Certified for a maximum use level of 16 fl. oz/100 lbs cement.
[13] Certified for a maximum use level of 6 oz/100 lbs cement.
[14] Certified for a maximum use level of 8 oz/100 lbs cement.
[15] Certified for pipes 8" and greater, tanks 1000 gallons and greater, fittings 4" and
greater.
[16] Certified for a maximum use level of 12 oz/100 lbs cement.
|
||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Number of matching Manufacturers is 1
Number of matching Products is 41
Processing time was 0 seconds
