NSF Product and Service Listings
These NSF Official Listings are current as of Friday, December 26, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=3X440&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
| Ebara Pumps Americas Corporation | |
| 1651 Cedar Line Drive | |
| Rock Hill, SC 29730 | |
| United States | |
| 803-327-5005 | |
| Visit this company's website |
Facility : Sparks, NV
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Pumps [G] |
||||
| 2CDU(A)(B)6(C)(D)(E)[1] [2] | 1¼" x 1" - 1½" x 1" | CLD 23 | MLTPL | |
| 3U(A)(B)(C)(D)(E)(F)(I)-XX[1] [3] [4] [5] | 2" x 1¼" - 3" x 2½" | CLD 23 | MLTPL | |
| AEVMS(A)(B)(C)(D)(E)1-(W)(F)(X)(Y)(Z)S[6] | 1 1/4" x 1 1/4" | CLD 23 | MLTPL | |
| AEVMS(A)(B)(C)(D)(E)10-(W)(F)(X)(Y)(Z)S[6] | 2" x 2" | CLD 23 | MLTPL | |
| AEVMS(A)(B)(C)(D)(E)15-(W)(F)(X)(Y)(Z)S[6] | 2" x 2" | CLD 23 | MLTPL | |
| AEVMS(A)(B)(C)(D)(E)20-(W)(F)(X)(Y)(Z)S[6] | 2" x 2" | CLD 23 | MLTPL | |
| AEVMS(A)(B)(C)(D)(E)3-(W)(F)(X)(Y)(Z)S[6] | 1 1/4" x 1 1/4" | CLD 23 | MLTPL | |
| AEVMS(A)(B)(C)(D)(E)5-(W)(F)(X)(Y)(Z)S[6] | 1 1/4" x 1 1/4" | CLD 23 | MLTPL | |
| AEVMS(A)L(B)(C)(D)(E)1-(W)(F)(X)(Y)(Z)S[6] | 1 1/4" x 1 1/4" | CLD 23 | MLTPL | |
| AEVMS(A)L(B)(C)(D)(E)10-(W)(F)(X)(Y)(Z)S[6] | 2" x 2" | CLD 23 | MLTPL | |
| AEVMS(A)L(B)(C)(D)(E)15-(W)(F)(X)(Y)(Z)S[6] | 2" x 2" | CLD 23 | MLTPL | |
| AEVMS(A)L(B)(C)(D)(E)20-(W)(F)(X)(Y)(Z)S[6] | 2" x 2" | CLD 23 | MLTPL | |
| AEVMS(A)L(B)(C)(D)(E)3-(W)(F)(X)(Y)(Z)S [6] | 1 1/4" x 1 1/4" | CLD 23 | MLTPL | |
| AEVMS(A)L(B)(C)(D)(E)5-(W)(F)(X)(Y)(Z)S [6] | 1 1/4" x 1 1/4" | CLD 23 | MLTPL | |
| CDU(A)(B)(C)(D)(E)(F)[1] [7] | 1¼" x 1" - 1½" x 1" | CLD 23 | MLTPL | |
| EVMSU(A)(B)32-(W)(R) F (X)(Y)(Z) S[8] | 2 1/2" x 2 1/2" | CLD 23 | MLTPL | |
| EVMSU(A)(B)45-(W)(R) F (X)(Y)(Z) S[8] | 3" x 3" | CLD 23 | MLTPL | |
| EVMSU(A)(B)64-(W)(R) F (X)(Y)(Z) S[8] | 4" x 4" | CLD 23 | MLTPL | |
| EVMSU(A)(B)90-(W)(R) F (X)(Y)(Z) S[8] | 2 1/2" x 2 1/2" | CLD 23 | MLTPL | |
| EVMSUG(A)(B)32-(W)(R) F (X)(Y)(Z) S[8] | 2 1/2" x 2 1/2" | CLD 23 | MLTPL | |
| EVMSUG(A)(B)45-(W)(R) F (X)(Y)(Z) S[8] | 3" x 3" | CLD 23 | MLTPL | |
| EVMSUG(A)(B)64-(W)(R) F (X)(Y)(Z) S[8] | 4" x 4" | CLD 23 | MLTPL | |
| EVMSUG(A)(B)90-(W)(R) F (X)(Y)(Z) S[8] | 4" x 4" | CLD 23 | MLTPL | |
| EVMSUL(A)(B)45-(W)(R) F (X)(Y)(Z) S[8] | 3" x 3" | CLD 23 | MLTPL | |
| EVMSUL(A)(B)64-(W)(R) F (X)(Y)(Z) S[8] | 4" x 4" | CLD 23 | MLTPL | |
| EVMSUL(A)(B)90-(W)(R) F (X)(Y)(Z) S[8] | 4" x 4" | CLD 23 | MLTPL | |
| JEU(A)(B)(C)(D)(E)[1] [9] | 1 1/4" x 1" | CLD 23 | MLTPL | |
[1] Sizes are expressed as suction x discharge.
[2] 2CDU Models:
A - Casing Size/Impeller Size
70/
120/
200/
B - Motor horsepower (hp)
20 - 2
30 - 3
50 - 5
C - Motor Enclosure
T - TEFC (Totally enclosed fan cooled)
D - ODP (Open drip proof)
W - Washdown Motor Enclosure
X - Explosion Proof Motor Enclosure
D - Phase/Volt
3 - Three phase, 230/460 volt
1 - Single phase, 115/230 volt
E - Seal type
C - Carbon/Ceramic/Viton
[3] 3U Models:
A - Speed
None - 3450 RPM
4 - 1725 RPM
B - Discharge size
32 - 1 1/4"
40 - 1 1/2"
50 - 2"
65 - 2 1/2"
C - Impeller performance code
125
160
200
"A", "B", "1", or "2" following the Impeller performance code designate a different
design in the impeller.
D - Motor horsepower (hp)
30 - 3
50 - 5
75 - 7.5
100 - 10
150 - 15
200 - 20
250 - 25
300 - 30
E - Motor Enclosure
D - ODP (Open drip proof)
T - TEFC (Totally enclosed fan cooled)
W - Washdown Motor Enclosure
X - Explosion Proof Motor Enclosure
F - Phase
1 - Single phase
3 - Three phase
I - Mechanical Seal Type
C - Carbon/Ceramic/Viton
3U4 models indicate a 4 pole motor as opposed to the standard 2 pole motor.
[4] 3U model Certification does not include flange gaskets.
[5] XX - Special configuration (any 2 digit alpha numeric)
[6] Size is expressed as suction end x discharge end.
A - Motor Bracket Type
U - NEMA
I - IEC (pm motor)
C - IEC (induction motor)
B - Motor Speed
none - 2 Pole
F - 4 Pole
C - Pump Configuration
none - Vertical
H - Horizontal
D - Working Pressure
none - Standard
P - Uprated
E - IEC Frame Size
none - standard frame
A - smaller frame
B - larger frame
W - Number of Impellers
1-29
F - Piping Connection Type
F - Round Flange
N - Oval Flange
L - Loose Round flange
V - Victaulic
C - Clamp
X - Horsepower of Motor
0050 - 1/2 hp
0075 - 3/4 hp
0100 - 1.0 hp
0150 - 1.5 hp
0200 - 2.0 hp
0300 - 3.0 hp
0500 - 5.0 hp
0750 - 7.5 hp
1000 - 10 hp
1500 - 15 hp
2000 - 20 hp
2500 - 25 hp
3000 - 30 hp
4000 - 40 hp
5000 - 50 hp
Y - Motor Type
D - Open Drip Proof (ODP)
T - Totally Enclosed Fan Cooled (TEFC)
W - Washdown Motor Enclosure
X - Explosion Proof Motor Enclosure
Z - Motor Phase
1 - Single Phase
3 - Three Phase
"A" in the model name indicates sub-component design modifications.
Only the type "S" mechanical seal (Silicon Carbide/Carbon/FPM ) is included in
Certification.
[7] CDU Models:
A - Nominal motor speed
Blank - 3600 rpm
4 - 1750 rpm
B - Casing Size/Impeller Size
70/0
70/1
70/3
70/5
120/1
120/3
120/5
200/1
200/3
200/5
"A" and "B" in the model name designate a different design in the impeller.
C - Motor horsepower (hp)
5 - 0.5
7 - 0.75
10 - 1
15 - 1.5
20 - 2
30 - 3
D - Motor Enclosure
D - ODP (Open drip proof)
T - TEFC (Totally enclosed fan cooled)
W - Washdown Motor Enclosure
X - Explosion Proof Motor Enclosure
E - Motor Phase
1 - Single phase
3 - Three phase
F - Mechanical Seal Type
C - Carbon/Ceramic/Viton
[8] Size is expressed as suction end x discharge end.
A - Pump Configuration
None - Vertical
H - Horizontal
B - Working Pressure
None - Standard
P - Uprated
W - Number of impellers (1-10)
R - Number of reduced diameter impellers (0-10)
X - Horsepower of motor
0050 - 1/2HP
0075 - 3/4HP
0100 - 1.0HP
0150 - 1.5HP
0200 - 2.0 HP
0300 - 3.0 HP
0500 - 5.0 HP
0750 - 7.5 HP
1000 - 10 HP
1500 - 15 HP
2000 - 20 HP
2500 - 25 HP
3000 - 30 HP
4000 - 40 HP
5000 - 50 HP
6000 - 60 HP
7500 - 75 HP
Y - Motor Type
D - Open Drip Proof (ODP)
T - Totally Enclosed Fan Cooled (TEFC)
W - Washdown Motor Enclosure
X - Explosion Proof Motor Enclosure
Z - Motor phase
1 - Single phase
3 - Three phase
[9] JEU Models:
A - Housing and Impeller Number
806
1506
B - Motor horsepower (hp)
7 - 3/4
10 - 1
15 - 1-1/2
20- 2
C - Motor Enclosure
D - ODP (Open drip proof)
T - TEFC (Totally enclosed fan cooled)
W - Washdown Motor Enclosure
X - Explosion Proof Motor Enclosure
D - Phase
1 - Single phase
3 - Three phase
E - Seal type
C - Carbon/Ceramic/Viton
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Rock Hill, SC
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Pumps [G] |
||||
| 2CDU(A)(B)6(C)(D)(E)[1] [2] | 1 1/4"x1"-1 1/2"x1" | CLD 23 | MLTPL | |
| 3U(A)(B)(C)(D)(E)(F)(I)-XX[1] [3] [4] [5] | 2"x1 1/4"-3"x2 1/2" | CLD 23 | MLTPL | |
| AEVMS(A)(B)(C)(D)(E)1-(W)(F)(X)(Y)(Z)[1] [6] | 1-1/4" x 1-1/4" | CLD 23 | MLTPL | |
| AEVMS(A)(B)(C)(D)(E)10-(W)(F)(X)(Y)(Z)[1] [6] | 2" x 2" | CLD 23 | MLTPL | |
| AEVMS(A)(B)(C)(D)(E)15-(W)(F)(X)(Y)(Z)[1] [6] | 2" x 2" | CLD 23 | MLTPL | |
| AEVMS(A)(B)(C)(D)(E)20-(W)(F)(X)(Y)(Z)[1] [6] | 2" x 2" | CLD 23 | MLTPL | |
| AEVMS(A)(B)(C)(D)(E)3-(W)(F)(X)(Y)(Z)[1] [6] | 1-1/4" x 1-1/4" | CLD 23 | MLTPL | |
| AEVMS(A)(B)(C)(D)(E)5-(W)(F)(X)(Y)(Z)[1] [6] | 1-1/4" x 1-1/4" | CLD 23 | MLTPL | |
| AEVMS(A)L(B)(C)(D)(E)1-(W)(F)(X)(Y)(Z)[1] [6] | 1-1/4" x 1-1/4" | CLD 23 | MLTPL | |
| AEVMS(A)L(B)(C)(D)(E)10-(W)(F)(X)(Y)(Z)[1] [6] | 2" x 2" | CLD 23 | MLTPL | |
| AEVMS(A)L(B)(C)(D)(E)15-(W)(F)(X)(Y)(Z)[1] [6] | 2" x 2" | CLD 23 | MLTPL | |
| AEVMS(A)L(B)(C)(D)(E)20-(W)(F)(X)(Y)(Z)[1] [6] | 2" x 2" | CLD 23 | MLTPL | |
| AEVMS(A)L(B)(C)(D)(E)3-(W)(F)(X)(Y)(Z)[1] [6] | 1-1/4" x 1-1/4" | CLD 23 | MLTPL | |
| AEVMS(A)L(B)(C)(D)(E)5-(W)(F)(X)(Y)(Z)[1] [6] | 1-1/4" x 1-1/4" | CLD 23 | MLTPL | |
| AEVMSU(A)(B)32-(W)(R) F (X)(Y)(Z) S[7] | 2 1/2" x 2 1/2" | CLD 23 | MLTPL | |
| AEVMSU(A)(B)45-(W)(R) F (X)(Y)(Z) S[7] | 3" x 3" | CLD 23 | MLTPL | |
| AEVMSU(A)(B)64-(W)(R) F (X)(Y)(Z) S[7] | 4" x 4" | CLD 23 | MLTPL | |
| AEVMSU(A)(B)90-(W)(R) F (X)(Y)(Z) S[7] | 4" x 4" | CLD 23 | MLTPL | |
| AEVMSUG(A)(B)32-(W)(R) F (X)(Y)(Z) S[7] | 2 1/2" x 2 1/2" | CLD 23 | MLTPL | |
| AEVMSUG(A)(B)45-(W)(R) F (X)(Y)(Z) S[7] | 3" x 3" | CLD 23 | MLTPL | |
| AEVMSUG(A)(B)64-(W)(R) F (X)(Y)(Z) S[7] | 4" x 4" | CLD 23 | MLTPL | |
| AEVMSUG(A)(B)90-(W)(R) F (X)(Y)(Z) S[7] | 4" x 4" | CLD 23 | MLTPL | |
| AEVMSUL(A)(B)32-(W)(R) F (X)(Y)(Z) S[7] | 2 1/2" x 2 1/2" | CLD 23 | MLTPL | |
| AEVMSUL(A)(B)45-(W)(R) F (X)(Y)(Z) S[7] | 3" x 3" | CLD 23 | MLTPL | |
| AEVMSUL(A)(B)64-(W)(R) F (X)(Y)(Z) S[7] | 4" x 4" | CLD 23 | MLTPL | |
| AEVMSUL(A)(B)90-(W)(R) F (X)(Y)(Z) S[7] | 4" x 4" | CLD 23 | MLTPL | |
| CDU(A)(B)(C)(D)(E)(F)[1] [8] | 1 1/4"x1"-1 1/2"x1" | CLD 23 | MLTPL | |
| EVMSU(A)(B)32-(W)(R) F (X)(Y)(Z) S[9] | 2 1/2" x 2 1/2" | CLD 23 | MLTPL | |
| EVMSU(A)(B)45-(W)(R) F (X)(Y)(Z) S[9] | 3" x 3" | CLD 23 | MLTPL | |
| EVMSU(A)(B)64-(W)(R) F (X)(Y)(Z) S[9] | 4" x 4" | CLD 23 | MLTPL | |
| EVMSU(A)(B)90-(W)(R) F (X)(Y)(Z) S[9] | 4" x 4" | CLD 23 | MLTPL | |
| EVMSUG(A)(B)32-(W)(R) F (X)(Y)(Z) S[9] | 2 1/2" x 2 1/2" | CLD 23 | MLTPL | |
| EVMSUG(A)(B)45-(W)(R) F (X)(Y)(Z) S[9] | 3" x 3" | CLD 23 | MLTPL | |
| EVMSUG(A)(B)64-(W)(R) F (X)(Y)(Z) S[9] | 4" x 4" | CLD 23 | MLTPL | |
| EVMSUG(A)(B)90-(W)(R) F (X)(Y)(Z) S[9] | 4" x 4" | CLD 23 | MLTPL | |
| EVMSUL(A)(B)32-(W)(R) F (X)(Y)(Z) S[9] | 2 1/2" x 2 1/2" | CLD 23 | MLTPL | |
| EVMSUL(A)(B)45-(W)(R) F (X)(Y)(Z) S[9] | 3" x 3" | CLD 23 | MLTPL | |
| EVMSUL(A)(B)64-(W)(R) F (X)(Y)(Z) S[9] | 4" x 4" | CLD 23 | MLTPL | |
| EVMSUL(A)(B)90-(W)(R) F (X)(Y)(Z) S[9] | 4" x 4" | CLD 23 | MLTPL | |
| GSDU(A)-100-(B)(C)(D)(E)(F)(G)[11] | 5" x 4" | CLD 23 | MLTPL | |
| GSDU(A)-125-(B)(C)(D)(E)(F)(G)[11] | 6" x 5" | CLD 23 | MLTPL | |
| GSDU(A)-150-(B)(C)(D)(E)(F)(G)[11] | 8" x 6" | CLD 23 | MLTPL | |
| GSDU(A)-32-(B)(C)(D)(E)(F)(G)[11] | 2" x 1-1/4" | CLD 23 | MLTPL | |
| GSDU(A)-40-(B)(C)(D)(E)(F)(G)[11] | 2-1/2" x 1-1/2" | CLD 23 | MLTPL | |
| GSDU(A)-50-(B)(C)(D)(E)(F)(G)[11] | 2-1/2" x 2" | CLD 23 | MLTPL | |
| GSDU(A)-65-(B)(C)(D)(E)(F)(G)[11] | 3" x 2-1/2" | CLD 23 | MLTPL | |
| GSDU(A)-80-(B)(C)(D)(E)(F)(G)[11] | 4" x 3" | CLD 23 | MLTPL | |
| JEU(A)(B)(C)(D)(E)[1] [10] | 1 1/4" x 1" | CLD 23 | MLTPL | |
[1] Size is expressed as suction x discharge.
[2] 2CDU Models
A - Casing Size/Impeller Size
70/
120/
200/
B - Motor horsepower (hp)
20 - 2
30 - 3
50 - 5
C - Motor Enclosure
D - ODP (Open drip proof)
T - TEFC (Totally enclosed fan cooled)
W - Washdown Motor Enclosure
X - Explosion Proof Motor Enclosure
D - Phase/Volt
1 - Single phase, 115/230 volt
3 - Three phase, 230/460 volt
E - Seal type
C - Carbon/Ceramic/Viton
[3] 3U Models
A - Speed
None - 3450 RPM
4 - 1725 RPM
B - Discharge size
32 - 1 1/4"
40 - 1 1/2"
50 - 2"
65 - 2 1/2"
C - Impeller performance code
125
160
200
"A", "B", "1", or "2" following the Impeller performance code designate a different
design in the impeller.
D - Motor horsepower (hp)
30 - 3
50 - 5
75 - 7.5
100- 10
150 - 15
200 - 20
250 - 25
300 - 30
E - Motor enclosure
D - ODP (Open drip proof)
T - TEFC (Totally enclosed fan cooled)
W - Washdown Motor Enclosure
X - Explosion Proof Motor Enclosure
F - Phase
1 - Single phase
3 - Three phase
I - Mechanical Seal Type
C - Carbon/Ceramic/Viton
3U4 models indicate a 4 pole motor as opposed to the standard 2 pole motor.
[4] 3U model Certification does not include flange gaskets.
[5] XX - Special configuration (any 2 digit alpha numeric)
[6] AEVMSU, AEVMSUL Model
A - Motor Bracket Type
U - NEMA
I - IEC (pm motor)
C - IEC (induction motor)
B - Motor Speed
None - 2 Pole (300 rpm)
F - 4 Pole (1800 rpm)
C - Pump Configuration
None - Vertical
H - Horizontal
D - Working Pressure
None - Standard
P - Uprated
E - IEC Frame Size
None - Standard frame
A - Smaller frame
B - Larger frame
F - Piping Connection Type
F - Round Flange
N - Oval Flange
L - Loose Round Flange
V - Victaulic
C - C
W - Number of Impellers
1 - 29
X - Horsepower of Motor
0050 - 1/2 hp
0075 - 3/4 hp
0100 - 1.0 hp
0150 - 1.5 hp
0200 - 2.0 hp
0300 - 3.0 hp
0500 - 5.0 hp
0750 - 7.5 hp
1000 - 10 hp
1500 - 15 hp
2000 - 20 hp
2500 - 25 hp
3000 - 30 hp
4000 - 40 hp
5000 - 50 hp
Y - Motor Type
D - Open Drip Proof (ODP)
T - Totally Enclosed Fan Cooled (TEFC)
W - Washdown Motor Enclosure
X - Explosion Proof Motor Enclosure
Z - Motor Phase
1 - Single Phase
3 - Three Phase
"A" in the model name indicates sub-component design modifications.
Only the type "S" mechanical seal (Silicon Carbide/Carbon/FPM) is included in
Certification.
[7] Size is expressed as suction end x discharge end.
A - Pump Configuration
none - Vertical
H - Horizontal
B - Working Pressure
none - Standard
P - Uprated
W - number of impellers (-1 to -10)
R - number of reduced diameter impellers (0-10)
X - Horsepower of motor
0050 - 1/2HP
0075 - 3/4HP
0100 - 1.0HP
0150 - 1.5HP
0200 - 2.0 HP
0300 - 3.0 HP
0500 - 5.0 HP
0750 - 7.5 HP
1000 - 10 HP
1500 - 15 HP
2000 - 20 HP
2500 - 25 HP
3000 - 30 HP
4000 - 40 HP
5000 - 50 HP
6000 - 60 HP
7500 - 75 HP
Y - Motor Type
D - Open Drip Proof (ODP)
T - Totally Enclosed Fan Cooled (TEFC)
W - Washdown Motor Enclosure
X - Explosion Proof Motor Enclosure
Z - Motor phase
1 - single phase
3 - three phase
[8] CDU Models
a - Nominal motor speed
Blank - 3600 rpm
4 - 1750 rpm
B - Casing size/impeller size
70/0
70/1
70/3
70/5
120/1
120/3
120/5
200/1
200/3
200/5
"A" and "B" in the model name designate a different design in the impeller.
C - Motor horsepower (hp)
5 - 0.5
7 - 0.75
10 - 1
15 - 1.5
20 - 2
30 - 3
D - Motor enclosure
D - ODP (Open drip proof)
T - TEFC (Totally enclosed fan cooled)
W - Washdown Motor Enclosure
X - Explosion Proof Motor Enclosure
E - Motor phase
1 - single phase
3 - three phase
F - Mechanical seal type
C - Carbon/Ceramic/Viton
[9] Size is expressed as suction end x discharge end.
A - Pump Configuration
None - Vertical
H - Horizontal
B - Working Pressure
None - Standard
P - Uprated
W - Number of impellers (1-10)
R - Number of reduced diameter impellers (0-10)
X - Horsepower of motor
0050 - 1/2HP
0075 - 3/4HP
0100 - 1.0HP
0150 - 1.5HP
0200 - 2.0 HP
0300 - 3.0 HP
0500 - 5.0 HP
0750 - 7.5 HP
1000 - 10 HP
1500 - 15 HP
2000 - 20 HP
2500 - 25 HP
3000 - 30 HP
4000 - 40 HP
5000 - 50 HP
6000 - 60 HP
7500 - 75 HP
Y - Motor Type
D - Open Drip Proof (ODP)
T - Totally Enclosed Fan Cooled (TEFC)
W - Washdown Motor Enclosure
X - Explosion Proof Motor Enclosure
Z - Motor phase
1 - Single phase
3 - Three phase
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
[10] JEU Models
A - Housing and impeller number
806
1506
B - Motor horsepower (hp)
7 - 3/4
10 - 1
15 - 1-1/2
20- 2
C - Motor enclosure
D - ODP (Open drip proof)
T - TEFC (Totally enclosed fan cooled)
W - Washdown Motor Enclosure
X - Explosion Proof Motor Enclosure
D - Phase
1 - Single phase
3 - Three phase
E - Seal type
C - Carbon/Ceramic/Viton
[11] Model trade names GSDU(A)-32-(B)(C)(D)(E)(F)(G):
The number in trade name is discharge nozzle in mm
A = Number of poles
2 = 2-pole
4 = 4-pole
B = Nominal impeller diameter in millimeters
125
125.1
160
160.1
200
200.1
250
315
C = Motor hp x 10 (may be either 2 or digits)
D = Motor Enclosure
T = TEFC
D = ODP
W = Washdown
X = Explosion Proof
E = Motor Phase
1 = Single Phase
3 = Three Phase
F = Seal Code
E = SiC/Carbon/EPDM/316SS (Only models with seal code ""E"" are certified)
G = Configuration
Blank = Pump and motor only
R = Pump with motor and motor supports
B = Package unit with base
Note: Up to 4 characters may be present after the seal code. These indicate special
configurations with differences that do not involve wetted parts.
|
||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Cles (TN), Italy
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Pumps[1] [G] |
||||
| EVMSU(A)(B)(C)1-(W)(F)(X)(Y)(Z) S[2] | 1 1/4" x 1 1/4" | CLD 23 | MLTPL | |
| EVMSU(A)(B)(C)10-(W)(F)(X)(Y)(Z) S[2] | 2" x 2" | CLD 23 | MLTPL | |
| EVMSU(A)(B)(C)15-(W)(F)(X)(Y)(Z)S[2] | 2" x 2" | CLD 23 | MLTPL | |
| EVMSU(A)(B)(C)20-(W)(F)(X)(Y)(Z) S[2] | 2" x 2" | CLD 23 | MLTPL | |
| EVMSU(A)(B)(C)3-(W)(F)(X)(Y)(Z) S[2] | 1 1/4" x 1 1/4" | CLD 23 | MLTPL | |
| EVMSU(A)(B)(C)5-(W)(F)(X)(Y)(Z) S[2] | 1 1/4" x 1 1/4" | CLD 23 | MLTPL | |
| EVMSU(A)(B)32- (W)(R) F (X)(Y)(Z) S[3] | 2 1/2" x 2 1/2" | CLD 23 | MLTPL | |
| EVMSU(A)(B)45- (W)(R) F (X)(Y)(Z) S[3] | 3" x 3" | CLD 23 | MLTPL | |
| EVMSU(A)(B)64- (W)(R) F (X)(Y)(Z) S[3] | 4" x 4" | CLD 23 | MLTPL | |
| EVMSU(A)(B)90- (W)(R) F (X)(Y)(Z) S[3] | 4" x 4" | CLD 23 | MLTPL | |
| EVMSUG(A)(B)32- (W)(R) F (X)(Y)(Z) S[3] | 2 1/2" x 2 1/2" | CLD 23 | MLTPL | |
| EVMSUG(A)(B)45- (W)(R) F (X)(Y)(Z) S[3] | 3" x 3" | CLD 23 | MLTPL | |
| EVMSUG(A)(B)64- (W)(R) F (X)(Y)(Z) S[3] | 4" x 4" | CLD 23 | MLTPL | |
| EVMSUG(A)(B)90- (W)(R) F (X)(Y)(Z) S[3] | 4" x 4" | CLD 23 | MLTPL | |
| EVMSUL(A)(B)(C)1-(W)(F)(X)(Y)(Z) S[2] | 1 1/4" x 1 1/4" | CLD 23 | MLTPL | |
| EVMSUL(A)(B)(C)10-(W)(F)(X)(Y)(Z) S[2] | 2" x 2" | CLD 23 | MLTPL | |
| EVMSUL(A)(B)(C)15-(W)(F)(X)(Y)(Z) S[2] | 2" x 2" | CLD 23 | MLTPL | |
| EVMSUL(A)(B)(C)20-(W)(F)(X)(Y)(Z) S[2] | 2" x 2" | CLD 23 | MLTPL | |
| EVMSUL(A)(B)(C)3-(W)(F)(X)(Y)(Z) S[2] | 1 1/4" x 1 1/4" | CLD 23 | MLTPL | |
| EVMSUL(A)(B)(C)5-(W)(F)(X)(Y)(Z) S[2] | 1 1/4" x 1 1/4" | CLD 23 | MLTPL | |
| EVMSUL(A)(B)32- (W)(R) F (X)(Y)(Z) S[3] | 2 1/2" x 2 1/2" | CLD 23 | MLTPL | |
| EVMSUL(A)(B)45- (W)(R) F (X)(Y)(Z) S[3] | 3" x 3" | CLD 23 | MLTPL | |
| EVMSUL(A)(B)64- (W)(R) F (X)(Y)(Z) S[3] | 4" x 4" | CLD 23 | MLTPL | |
| EVMSUL(A)(B)90- (W)(R) F (X)(Y)(Z) S[3] | 4" x 4" | CLD 23 | MLTPL | |
[1] Size is expressed as suction end x discharge end.
[2] A - Motor Speed
None - 2 Pole (300 rpm)
F - 4 Pole (1800 rpm)
B - Pump Configuration
None - Vertical
H - Horizontal
C - Working Pressure
None - Standard
P - Uprated
F - Piping Connection Type
F - Round flange
N - Oval flange
L - Loose round flange
V - Victaulic
C - Clamp
W - Number of Impellers
1 - 29
X - Horsepower of Motor
0050 - 1/2 hp
0075 - 3/4 hp
0100 - 1.0 hp
0150 - 1.5 hp
0200 - 2.0 hp
0300 - 3.0 hp
0500 - 5.0 hp
0750 - 7.5 hp
1000 - 10 hp
1500 - 15 hp
2000 - 20 hp
2500 - 25 hp
3000 - 30 hp
4000 - 40 hp
5000 - 50 hp
Y - Motor Type
D - Open drip proof (ODP)
T - Totally enclosed fan cooled (TEFC)
W - Washdown Motor Enclosure
X - Explosion Proof Motor Enclosure
Z - Motor phase
1 - Single phase
3 - Three phase
"A" in the model name indicates sub-component design modifications.
Only the type "S" mechanical seal (Silicon Carbide/Carbon/FPM) is included in
Certification.
[3] A - Pump Configuration
None - Vertical
H - Horizontal
B - Working Pressure
None - Standard
P - Uprated
W - Number of impellers (1-10)
R - Number of reduced diameter impellers (0-10)
X - Horsepower of motor
0050 - 1/2HP
0075 - 3/4HP
0100 - 1.0HP
0150 - 1.5HP
0200 - 2.0 HP
0300 - 3.0 HP
0500 - 5.0 HP
0750 - 7.5 HP
1000 - 10 HP
1500 - 15 HP
2000 - 20 HP
2500 - 25 HP
3000 - 30 HP
4000 - 40 HP
5000 - 50 HP
6000 - 60 HP
7500 - 75 HP
Y - Motor Type
D - Open Drip Proof (ODP)
T - Totally Enclosed Fan Cooled (TEFC)
W - Washdown Motor Enclosure
X - Explosion Proof Motor Enclosure
Z - Motor phase
1 - Single phase
3 - Three phase
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||
Facility : Gambellara, Vicenza, Italy
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Pumps[1] [G] |
||||
| EVMU32-(W)F (X)(Y)(Z) S[2] | 2 1/2" x 2 1/2" | CLD 23 | MLTPL | |
| EVMU45-(W)F (X)(Y)(Z) S[2] | 3" x 3" | CLD 23 | MLTPL | |
| EVMU64-(W)F (X)(Y)(Z) S[2] | 4" x 4" | CLD 23 | MLTPL | |
| EVMUG32-(W)(R) F (X)(Y)(Z) S[3] | 2 1/2" x 2 1/2" | CLD 23 | MLTPL | |
| EVMUG45-(W)(R) F (X)(Y)(Z) S[3] | 3" x 3" | CLD 23 | MLTPL | |
| EVMUG64-(W)(R) F (X)(Y)(Z) S[3] | 4" x 4" | CLD 23 | MLTPL | |
| EVMUL32-(W)(R) F (X)(Y)(Z) S[2] | 2 1/2" x 2 1/2" | CLD 23 | MLTPL | |
| EVMUL45-(W)(R) F (X)(Y)(Z) S[2] | 3" x 3" | CLD 23 | MLTPL | |
| EVMUL64-(W)(R) F (X)(Y)(Z) S[2] | 4" x 4" | CLD 23 | MLTPL | |
[1] Size is expressed as suction end x discharge end.
[2] W - Number of impellers
1-18
R - Number of reduced diameter impellers (32, 45, and 64 models only)
0-18
X - Horsepower of motor
0050 - 1/2HP
0075 - 3/4HP
0100 - 1.0HP
0150 - 1.5HP
0200 - 2.0 HP
0300 - 3.0 HP
0500 - 5.0 HP
0750 - 7.5 HP
1000 - 10 HP
1500 - 15 HP
2000 - 20 HP
2500 - 25 HP
3000 - 30 HP
4000 - 40 HP
5000 - 50 HP
Y - Motor type
D - Open drip proof (ODP)
T - Totally enclosed fan cooled (TEFC)
W - Washdown Motor Enclosure
X - Explosion Proof Motor Enclosure
Z - Motor phase
1 - Single phase
3 - Three phase
"A" in the model name indicates sub-component design modifications.
[3] Size is expressed as suction end x discharge end.
W - Number of impellers
1-18
R - Number of reduced diameter impellers
0-18
X - Horsepower of motor
0050 - 1/2HP
0075 - 3/4HP
0100 - 1.0HP
0150 - 1.5HP
0200 - 2.0 HP
0300 - 3.0 HP
0500 - 5.0 HP
0750 - 7.5 HP
1000 - 10 HP
1500 - 15 HP
2000 - 20 HP
2500 - 25 HP
3000 - 30 HP
4000 - 40 HP
5000 - 50 HP
Y - Motor type
D - Open drip proof (ODP)
T - Totally enclosed fan cooled (TEFC)
W - Washdown Motor Enclosure
X - Explosion Proof Motor Enclosure
Z - Motor phase
1 - Single phase
3 - Three phase
"B" in the model name indicates sub-component design modifications.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||
Number of matching Manufacturers is 1
Number of matching Products is 108
Processing time was 0 seconds
