NSF Product and Service Listings

These NSF Official Listings are current as of Monday, December 22, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=42930&Standard=061&


NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.

 
Specialty Mfg. Co. 
5858 Centerville Road
St. Paul, MN 55127 
United States 
612-653-0599
Visit this company's website


Facility : St. Paul, MN

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ball Valves [G]
FP 637-(1)(2)(1)(2)-(4)(5)[2] [1] CLD 23 MLTPL
FP 639-(1)(2)(3)(2)(3)(2)-(4)(5)[3] [1] CLD 23 MLTPL
PVC 629-(1)(2)(3)(2)(3)(2)-(4)(5)[4] [1] CLD 23 MLTPL
PVC 226-(1)(2)(1)(2)-(4)(5)[5] [1] CLD 23 MLTPL
PVC 326-(1)(2)(3)(2)(3)(2)-(4)(5)[6] [1] CLD 23 MLTPL
PVC 628-(1)(2)(1)(2)-(4)(5)[7] [1] CLD 23 MLTPL
PVC 637-(1)(2)(1)(2)-(4)(5)[2] [1] CLD 23 MLTPL
PVC 638-(1)(2)(1)(2)-(4)(5)[8] [1] CLD 23 MLTPL
PVC 639-(1)(2)(3)(2)(3)(2)-(4)(5)[3] [1] CLD 23 MLTPL
PVC 657-(1)(2)(1)(2)-(4)(5)[8] [1] CLD 23 MLTPL
PVC 658-(1)(2)(3)(2)-(4)(5)[9] [1] CLD 23 MLTPL
WFP 226-(1)(2)(1)(2)-(4)(5)[5] [1] CLD 23 MLTPL
WFP 326-(1)(2)(3)(2)(3)(2)-(4)(5)[6] [1] CLD 23 MLTPL
WFP 637-(1)(2)(1)(2)-(4)(5)[2] [1] CLD 23 MLTPL
WFP 638-(1)(2)(1)(2)-(4)(5)[8] [1] CLD 23 MLTPL
WFP 639-(1)(2)(3)(2)(3)(2)-(4)(5)[3] [1] CLD 23 MLTPL
WFP 657-(1)(2)(1)(2)-(4)(5)[8] [1] CLD 23 MLTPL
WFP 658-(1)(2)(3)(2)-(4)(5) [9] [1] CLD 23 MLTPL
WPVC 226-(1)(2)(1)(2)-(4)(5)[5] [1] CLD 23 MLTPL
WPVC 326-(1)(2)(3)(2)(3)(2)-(4)(5)[6] [1] CLD 23 MLTPL
WPVC 637-(1)(2)(1)(2)-(4)(5)[2] [1] CLD 23 MLTPL
WPVC 638-(1)(2)(1)(2)-(4)(5)[8] [1] CLD 23 MLTPL
WPVC 639-(1)(2)(3)(2)(3)(2)-(4)(5)[3] [1] CLD 23 MLTPL
WPVC 657-(1)(2)(1)(2)-(4)(5)[8] [1] CLD 23 MLTPL
WPVC 658-(1)(2)(3)(2)-(4)(5)[9] [1] CLD 23 MLTPL 

[1] Certified for 1 unit per 0.25 L. Product requires a five minute flush.
[2] Suffixes indicate optional sizes and fitting types:
    Material Options: FP – Black Glass Filled Polypropylene, PVC - Gray PVC, WPVC - White
    PVC, WFP - White Glass Filled Polypropylene 
    (1) Inlet/Outlet end: 2 - 1/8" (2/16), 4 - 1/4" (4/16), 6 - 3/8" (6/16), 8 - 1/2" (8/16)
    (2) Fitting Type: F - Female NPT (1/4", 3/8", 1/2"), M - Male NPT (1/8", 1/4", 3/8",
        1/2"), BIB - Smooth (Stem) Barb (3/8"), B - Hose Barb (1/8", 1/4", 3/8", 1/2"),
        SMC - Push-to-connect (1/4", 3/8", 1/2"), TB - Tapered Barb (3/8", 5/8"),
        4CJ - 1/4" Compression JACO, 6CJ - 3/8" Compression JACO
    (4) Seal Type: E - Ethylene Propylene
    (5) Handle and Panel Mount Options (non-wetted)
[3] Suffixes indicate optional sizes and fitting types:
    Material Options: FP - Black Polypropylene, WFP - White Polypropylene, PVC - Gray PVC,
    WPVC - White PVC
    (1) Inlet/Outlet end: 2 - 1/8" (2/16), 4 - 1/4" (4/16), 6 - 3/8" (6/16), 8 - 1/2" (8/16)
    (2) Fitting Type: F - Female NPT (1/4", 3/8", 1/2"), M - Male NPT (1/8", 1/4", 3/8"),
        BIB - Smooth (Stem) Barb (3/8"), CjG - Collets John Guest, B - Hose Barb (1/8'",
        1/4", 3/8", 1/2"), SMC - Push-to-connect (1/4", 3/8"), TB - Tapered Barb, 
        DM - DM Fit Collets, SSR - Female NPT w/Stainless Steel Support Ring (1/2")
    (3) Outlet end (3-way only): 2 - 1/8" (2/16), 4 - 1/4" (4/16), 6 - 3/8" (6/16), 8 - 1/2"
        (8/16)
    (4) Seal Type: E - Ethylene Propylene
    (5) Handle and Panel Mount Options (non-wetted)
[4] Suffixes indicate optional sizes and fitting types:
    Material Options: PVC - Gray PVC
    (1) Inlet/Outlet end: (4 - 1/4" (4/16), 6 - 3/8" (6/16))
    (2) Fitting Type: (F - Female NPT (1/4", 3/8"), M - Male NPT (1/4", 3/8"))
    (3) Outlet end (3-way only): (4 - 1/4" (4/16), 6 - 3/8" (6/16)
    (4) Seal Type: (E - Ethylene Propylene)
    (5) Handle and Panel Mount Options (non-wetted)
[5] Suffixes indicate optional sizes and fitting types:
    Material Options: WFP - White Polypropylene, PVC - Gray PVC, WPVC - White PVC
    (1) Inlet/Outlet end: 2 - 1/8" (2/16), 4 - 1/4" (4/16), 5 - 5/16" (5/16),
        6 - 3/8" (6/16), 8 - 1/2" (8/16)
    (2) Fitting Type: F - Female NPT (1/8”, 1/4"), M - Male NPT (1/8”, 1/4”), BIB - Smooth
        (Stem) Barb (3/8", 1/2"), CjG - Collets John Guest, B - Hose Barb (1/8", 1/4",
    5/16",
        3/8", 1/2"), SMC - Push-to-connect (1/4", 3/8"), DM - DM Fit Collets
    (4) Seal Type: E - Ethylene Propylene
    (5) Handle and Panel Mount Options (non-wetted)
[6] Suffixes indicate optional sizes and fitting types:
    Material Options: WFP - White Polypropylene, PVC - Gray PVC, WPVC - White PVC
    (1) Inlet/Outlet end: 2 - 1/8" (2/16), 4 - 1/4" (4/16), 5 - 5/16" (5/16),
        6 - 3/8" (6/16), 8 - 1/2" (8/16)
    (2) Fitting Type: F - Female NPT (1/8", 1/4"), M - Male NPT (1/8", 1/4"), BIB - Smooth
        (Stem) Barb (3/8", 1/2"), CjG - Collets John Guest, B - Hose Barb (1/8", 1/4",
    5/16",
        3/8", 1/2"), SMC - Push-to-connect (1/4", 3/8"), DM - DM Fit Collets 
    (3) Outlet end (3-way only): (2 - 1/8" (2/16), 4 - 1/4" (4/16), 5 - 5/16" (5/16), 
        6 - 3/8" (6/16), 8 - 1/2" (8/16)
    (4) Seal Type: E - Ethylene Propylene
    (5) Handle and Panel Mount Options (non-wetted)
[7] Suffixes indicate optional sizes and fitting types:
    Material Options: PVC - Gray PVC
    (1) Inlet/Outlet end: 4 - 1/4" (4/16), 6 - 3/8" (6/16)
    (2) Fitting Type: F - Female NPT (1/4", 3/8"), M - Male NPT (1/4", 3/8")
    (4) Seal Type: E - Ethylene Propylene
    (5) Handle and Panel Mount Options (non-wetted)
[8] Suffixes indicate optional sizes and fitting types:
    Material Options: WFP - White Polypropylene, PVC - Gray PVC, WPVC - White PVC
    (1) Inlet/Outlet end: 2 - 1/8" (2/16), 4 - 1/4" (4/16), 6 - 3/8" (6/16), 8 - 1/2" (8/16)
    (2) Fitting Type: F - Female NPT (1/4", 3/8", 1/2"), M - Male NPT (1/8", 1/4", 3/8"),
        BIB - Smooth (Stem) Barb (3/8"), CjG - Collets John Guest, B - Hose Barb
        (1/8", 1/4", 3/8", 1/2"), SMC - Push-to-connect (1/4", 3/8"), TB - Tapered Barb,
        DM - DM Fit Collets, SSR - Female NPT w/Stainless Steel Support Ring (1/2")
    (4) Seal Type: E - Ethylene Propylene
    (5) Handle and Panel Mount Options (non-wetted)
[9] Suffixes indicate optional sizes and fitting types: 
    Material Options: WFP - White Polypropylene, PVC - Gray PVC, WPVC - White PVC
    (1) Inlet end: 4 - 1/4: (4/16)
    (2) Fitting Type: F - Female NPT (1/4"), SMC - Push-to-connect (1/4", 3/8")
    (3) Outlet end 4 - 1/4" (4/16), 6 - 3/8" (6/16)
    (4) Seal Type: E - Ethylene Propylene
    (5) Handle and Panel Mount Options (non-wetted)
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Valves [G]
PVC CHK 426-(1)(2)(3)(2)(3)(2)-(4)(5)(7)[10] [1] CLD 23 MLTPL
PVC 689-(1)(2)(3)(6)(3)(6)-(4)(5)[11] [1] CLD 23 MLTPL
WFP CHK 426-(1)(2)(3)(2)(3)(2)-(4)(5)(7)[10] [1] CLD 23 MLTPL
WPVC CHK 426-(1)(2)(3)(2)(3)(2)-(4)(5)(7)[10] [1] CLD 23 MLTPL 

[1] Certified for 1 unit per 0.25 L. Product requires a five minute flush.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[10] Suffixes indicate optional sizes and fitting types:
     Material Options: WFP - White Polypropylene, PVC - Gray PVC, WPVC - White PVC
     (1) Inlet/Outlet end: 2 - 1/8" (2/16), 4 - 1/4" (4/16), 5 - 5/16" (5/16), 6 - 3/8"
         (6/16), 8 - 1/2" (8/16)
     (2) Fitting Type: F - Female NPT (1/8", 1/4"), M - Male NPT (1/8", 1/4"), BIB - Smooth
         (Stem) Barb (3/8"), CjG - Collets John Guest, B - Hose Barb (1/8", 1/4", 5/16",
     3/8",
         1/2"), SMC - Push-to-connect (1/4", 3/8"), DM - DM Fit Collets 
     (3) Outlet end (3-way only): 2 - 1/8" (2/16), 4 - 1/4" (4/16), 5 - 5/16" (5/16), 6 -
     3/8" 
         (6/16), 8 - 1/2" (8/16)
     (4) Seal Type: E - Ethylene Propylene
     (5) Handle and Panel Mount Options (non-wetted)
     (7) Spring and Ball Material: 1/3# SS Spring and SS Ball (1/3 psi), 1/3#, TEF SS Spring
         and PTFE Ball (1/3 psi), None SS Spring and SS Ball (1 psi), TEF SS Spring and PTFE
         Ball (1 psi), 1.5# SS Spring and SS Ball (1.5 psi), 1.5#, TEF SS Spring and PTFE
     Ball
         (1.5 psi), 3# SS Spring and SS Ball (3 psi), 3#, TEF SS Spring and PTFE Ball (3
     psi),
         5# SS Spring and SS Ball(5 psi), 5#, TEF SS Spring and PTFE Ball (5 psi), 7# SS
         Spring and SS Ball (7 psi), 7#, TEF SS Spring and PTFE Ball (7 psi), 10# SS Spring
         and SS Ball (10 psi), 10#, TEF SS Spring and PTFE Ball (10 psi), 12# SS Spring and
         SS Ball (12 psi), 12#, TEF SS Spring and PTFE Ball (12 psi), 15# SS Spring and SS
         Ball (15 psi), 15#, TEF SS Spring and PTFE Ball (15 psi)
[11] Suffixes indicate optional sizes and fitting types:
     Material Options: PVC - Gray PVC               
     (1) Inlet/Outlet end: 2 - 1/8" (2/16), 4 - 1/4" (4/16), 6 - 3/8" (6/16), 8 - 1/2" (8/16)
     (2) Fitting Type: F - Female NPT (1/4", 3/8", 1/2"), M - Male NPT (1/8", 1/4", 3/8"),
         BIB - Smooth (Stem) Barb (3/8"), CjG - Collets John Guest, B - Hose Barb
         (1/8", 1/4", 3/8", 1/2"), SMC - Push-to-connect (1/4", 3/8"), TB - Tapered Barb,
         DM - DM Fit Collets, SSR - Female NPT w/Stainless Steel Support Ring (1/2")        
     (3) Outlet end (3-way only): 4 - 1/4" (4/16), 6 - 3/8" (6/16), 8 - 1/2" (8/16),
         12 - 3/4" (12/16)                  
     (4) Seal Type: E - Ethylene Propylene
     (5) Handle and Panel Mount Options (non-wetted) 
     (6) T-Link End Fitting Type: M - NPT (1/2" Male x 1/2" Male, 3/4" Male x 3/4" Male),
         NPSM - National Pipe Straight Mechanical (1/2" Female x 1/2" Male), QEST -
         QEST brand system (includes plastic nut, stainless steel ring and cone)
         (1/4", 3/8", 1/2")

Number of matching Manufacturers is 1
Number of matching Products is 29
Processing time was 0 seconds