NSF Product and Service Listings
These NSF Official Listings are current as of Monday, September 23, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=46240&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
Hilti AG | |
Hiltistraße 6 | |
86916 Kaufering | |
Germany | |
423 234 2111 | |
Visit this company's website |
Facility : Kaufering, Germany
Joining and Sealing Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Adhesives |
||||
HIT-CT 100 | [3] | CLD 23 | ADH | |
HIT-FP 700-R | [4] | D. HOT | ADH | |
HIT-HY 10 PLUS | [2] | CLD 23 | ADH | |
HIT-HY200[5] | NA | D. HOT | ADH | |
HIT-HY200-A[5] | NA | D. HOT | ADH | |
HIT-HY200-A V3[5] | NA | D. HOT | ADH | |
HIT-HY200-R[5] | NA | D. HOT | ADH | |
HIT-HY200-R V3[5] | NA | D. HOT | ADH | |
HIT-MM Plus | [2] | CLD 23 | ADH | |
HIT-RE 500 V3[1] | NA | D. HOT | ADH | |
HIT-RE 500 V4[1] | NA | D. HOT | ADH | |
HUS4-MAX[6] | NA | CLD 23 | ADH | |
Hilti HIT-CT 1[1] | NA | CLD 23 | ADH | |
Hilti HIT-HY 100[1] | NA | D. HOT | ADH | |
Hilti HIT-HY 150 Max[1] | NA | D. HOT | ADH | |
Hilti HIT-HY 150 Max Adhesive Anchoring System[1] | NA | D. HOT | ADH | |
Hilti HIT-HY 150 Max-SD[1] | NA | D. HOT | ADH | |
Hilti HIT-HY170 | [2] | CLD 23 | ADH | |
Hilti HIT-RE 100 | NA | D. HOT | EPOXY | |
Hilti HIT-RE 500[1] | NA | D. HOT | EPOXY | |
Hilti HIT-RE 500 Adhesive Anchoring System[1] | NA | D. HOT | EPOXY | |
Hilti HIT-RE 500 SD[1] | NA | D. HOT | EPOXY | |
Hilti HIT-RE 500 SD Adhesive Anchoring System[1] | NA | D. HOT | EPOXY | |
Hilti HVU2 Anchoring Adhesive | NA | CLD 23 | ADH | |
KHC[6] | NA | CLD 23 | ADH | |
[1] Product is Certified for use as an anchoring adhesive for installing threaded rods (less than or equal to 1.3 inches in diameter) in concrete for water treatment applications. [2] Certified for use as an anchoring adhesive for installing threaded rods (less than or equal to 24 mm in diameter) in concrete or masonry for water treatment applications. Mix ratio of Part A:Part B is 3:1 by volume. [3] Certified for use as an anchoring adhesive for installing threaded rods in concrete or masonry for water treatment applications. Certified for a maximum surface area to volume ratio of 0.00006 sq. in./L [4] Certified for use as an anchoring adhesive for installing threaded rods (less than or equal to 40 mm in diameter) in concrete for water treatment applications. [5] Certified for use as an anchoring adhesive for installing threaded rods (less than or equal to 32 mm in diameter) in concrete for water treatment applications. [6] Certified for use as an anchoring adhesive for installing screw anchors in concrete for water treatment applications. KHC is certified for use with screw anchors less than or equal to 20 mm in diameter. HUS4-MAX is certified for use with screw anchors less than or equal to 16 mm in diameter. |
Number of matching Manufacturers is 1
Number of matching Products is 25
Processing time was 0 seconds