NSF Product and Service Listings

These NSF Official Listings are current as of Thursday, January 20, 2022 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=46810&Standard=061&



NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings.


 
Sherwin-Williams Company 
101 Prospect Avenue
Cleveland, OH 44115 
United States 
773-821-3420


Facility : Victorville, CA

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Coatings - Tank
Dura-Plate UHS[1] >= 1000 gal. CLD 23 EPOXY

[1] Colors: B62H210 gold (primer), B62L210 blue (primer), B62V210 hardener, B62W210 white   
             (topcoat), B62W212 ultrawhite (topcoat), B62HW0211 Tannery (topcoat).
    Number of Coats: 2
    Sequence of Coats: Primer, topcoat
    Maximum Field Use Dry Film Thickness (in mils): Primer 10, topcoat 14
    Maximum thinner: 5% Acetone (used with topcoat only)
    Recoat Cure Time and Temperature: 16 hours at 77°F
    Final Cure Time and Temperature: 4 days at 77°F
    Special Comments: Up to 1.5 fl oz of 844-5558 Green Colorant, AC-9434 Green Colorant, or
    AC-3738 Black Colorant may be added to 5 gal. of mixed product. Mix ratio of Part A:Part
    B is 4:1 by volume.
    
    Colors: B62W210 White (topcoat), B62V210 (hardener), B62W212 ultrawhite (topcoat), 
            B62HW0211 Tannery (topcoat).
    Number of Coats: 1-3
    Maximum Field Use Dry Film Thickness (in mils): 50
    Recoat Cure Time and Temperature: 16 hours at 77°F
    Final Cure Time and Temperature: 4 days at 77°F
    Special Comments: Up to 1.5 fl oz of 844-5558 Green Colorant, AC-9434 Green Colorant, or
    AC-3738 Black
    Colorant may be added to 5 gal. of mixed product. Mix ratio of Part A:Part B is 4:1 by
    volume.

Coatings - Pipe
Dura-Plate UHS[1] >= 30" CLD 23 EPOXY

[1] Colors: B62H210 gold (primer), B62L210 blue (primer), B62V210 hardener, B62W210 white   
             (topcoat), B62W212 ultrawhite (topcoat), B62HW0211 Tannery (topcoat).
    Number of Coats: 2
    Sequence of Coats: Primer, topcoat
    Maximum Field Use Dry Film Thickness (in mils): Primer 10, topcoat 14
    Maximum thinner: 5% Acetone (used with topcoat only)
    Recoat Cure Time and Temperature: 16 hours at 77°F
    Final Cure Time and Temperature: 4 days at 77°F
    Special Comments: Up to 1.5 fl oz of 844-5558 Green Colorant, AC-9434 Green Colorant, or
    AC-3738 Black Colorant may be added to 5 gal. of mixed product. Mix ratio of Part A:Part
    B is 4:1 by volume.
    
    Colors: B62W210 White (topcoat), B62V210 (hardener), B62W212 ultrawhite (topcoat), 
            B62HW0211 Tannery (topcoat).
    Number of Coats: 1-3
    Maximum Field Use Dry Film Thickness (in mils): 50
    Recoat Cure Time and Temperature: 16 hours at 77°F
    Final Cure Time and Temperature: 4 days at 77°F
    Special Comments: Up to 1.5 fl oz of 844-5558 Green Colorant, AC-9434 Green Colorant, or
    AC-3738 Black
    Colorant may be added to 5 gal. of mixed product. Mix ratio of Part A:Part B is 4:1 by
    volume.



Facility : Moline, IL

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Coatings - Pipe
CorroPipe® II PW Ultra[3] >= 48" D. HOT PUR
Corrocote II PW[1] >= 78" D. HOT PUR
Corrocote II PW (AM)[1] >= 78" D. HOT PUR
Corropipe II PW[2] >= 18" CLD 23 PUR
Corropipe II PW (AM)[2] >= 18" CLD 23 PUR

[1] Colors: Off-White, Medium Gray 
    Number of Coats: 1
    Sequence of Coats: Any combination of listed colors
    Maximum Field Use Dry Film Thickness (in mils): 80
    Maximum Thinner: None
    Final Cure Time and Temperature: 48 hours at 75F
    Special Comments: Mix ration of Part A to Part B is 1:1.
[2] Colors: Off-White, Medium Gray, Safety Blue, Light Blue
    Number of Coats: 1
    Sequence of Coats: Any combination of listed colors
    Maximum Field Use Dry Thickness (in mils): 60
    Maximum Thinner: None
    Final Cure Time and Temperature: 5 days at 72F
    Special Comments: Mix ration of Part A:Part B is 1:1 by volume.
[3] Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 60
    Maximum Thinner: None
    Final Cure Time and Temperature: 7 days at 70°F
    Special Comments: Spray application using a plural component heated airless spray unit.
    Mix ratio of Part A to Part B is 1:1 by volume.

Coatings - Tank
Corrocote II PW[1] >= 30,000 gal. D. HOT PUR
Corrocote II PW (AM)[1] >= 30,000 gal. D. HOT PUR
Corropipe II PW (FS)[2] >= 300 gal. CLD 23 PUR
Corropipe II PW (FS) AM[2] >= 300 gal. CLD 23 PUR

[1] Colors: Off-White, Medium Gray 
    Number of Coats: 1
    Sequence of Coats: Any combination of listed colors
    Maximum Field Use Dry Film Thickness (in mils): 80
    Maximum Thinner: None
    Final Cure Time and Temperature: 48 hours at 75F
    Special Comments: Mix ration of Part A to Part B is 1:1.
[2] Colors: Off-White, Medium Gray, Safety Blue, Light Blue
    Number of Coats: 1
    Sequence of Coats: Any combination of listed colors
    Maximum Field Use Dry Thickness (in mils): 60
    Maximum Thinner: None
    Final Cure Time and Temperature: 5 days at 72F
    Special Comments: Mix ration of Part A:Part B is 1:1 by volume.



Facility : Andover, KS

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Coatings - Pipe
Dura-Plate 235 PW[1] >= 60" CLD 23 EPOXY
Dura-Plate UHS[2] >= 30" CLD 23 EPOXY
SherPlate PW[3] >= 12"[4] CLD 23 EPOXY
SherPlate PW[5] >= 6"[4] CLD 23 EPOXY
Tank Clad HS Epoxy Low Temp Hardener[6] >= 30" CLD 23 EPOXY

[1] Colors: B67WX235 Off-White, B67HX235 Buff, B67RX235 Red, B67BX235 Black, B67LW236 Blue,
            B67HX236 Light Buff
    Number of Coats: 2
    Sequence of coats: Any combination of listed colors
    Maximum Field Use Dry Film Thickness (in mils): 16
    Maximum Thinner: 10% Reducer R7K104
    Recoat Cure Time and Temperature: 3.5 hours at 25° C
    Final Cure Time and Temperature: 7 days at 25° C
    Special Comments: Mix ratio of Part A:Part B is 4:1 by volume. Induction time is 15
    minutes.
[2] Colors: B62H210 gold (primer), B62L210 blue (primer), B62W212 ultrawhite (topcoat), 
            B62W210 white (topcoat), B62W211 white (topcoat), B62HW0211 Tannery 
            (topcoat), B62V210 hardener, or B62V211 hardener.
    Number of Coats: 2
    Sequence of Coats: Primer, Topcoat
    Maximum Field Use Dry Film Thickness (in mils): Primer 10, Topcoat 14
    Recoat Cure Time and Temperature: 16 hours at 77°F
    Final Cure Time and Temperature: 4 days at  77°F
    Special Comments: Up to 1.5 fl oz of 844-5558 green colorant, AC-9434 green colorant, or
    AC-3738 black colorant may be added to 5 gal. of mixed product. Mix ratio of Part A:Part
    B is 4:1 by volume.
    
    Colors: B62H210 Gold (Primer), B62W210 White (Topcoat), B62W212 UltraWhite (topcoat), 
            B62L210 Blue (Primer), B62W211 White (Topcoat), B62HW0211 Tannery (Topcoat), 
            B62V210 Hardener or B62V211 Hardener
    Number of Coats: 1 - 3	
    Sequence of Coats: B62W210 (for coat 1); BW2W210 or BW2W211 (for coats 2 & 3 if used), 
                       BW2W211 or B62HW0211 (for coats 2 & 3 if used)
    Maximum Field Use Dry Film Thickness (in mils): 50	
    Recoat Cure Time and Temperature: 16 hours at 77°F
    Final Cure Time and Temperature: 4 days at  77°F
    Special Comments: Up to 1.5 fl oz of 844-5558 green colorant, AC-9434 green colorant, or
    AC-3738 black colorant may be added to 5 gal. of mixed product. Mix ratio of Part A:Part
    B is 4:1 by volume.
[3] Colors: Blue, white
    Number of Coats: 1 - 2
    Sequence of Coats: Any
    Maximum Field Use Dry Film Thickness (in mils): 50 for tanks >= 100 gallons and pipes >=
    12"
    Maximum Thinner: None 
    Recoat Cure Time and Temperature: 1 hour at 77°F
    Final Cure Time and Temperature: 24 hours at 77°F for coating tanks >= 100 gallons and
    pipes >= 12"
    Special Comments: Mix ratio of Part A:Part B is 1:1 by volume.
[4] Coatings with a 24 hour final cure time are Certified for use on tanks >= 100 gallons
    and pipes >= 12". Coatings with a 10 day final cure time are Certified for use on pipes
    >= 6".
[5] Colors: Blue, white
    Number of Coats: 1 - 2
    Sequence of Coats: Any
    Maximum Field Use Dry Film Thickness (in mils): 30 for pipes >= 6"
    Maximum Thinner: None 
    Recoat Cure Time and Temperature: 1 hour at 77°F
    Final Cure Time and Temperature: 10 days at 77°F for coating pipes >= 6"
    Special Comments: Mix ratio of Part A:Part B is 1:1 by volume.
[6] Colors: B62 W80 Sanitary White, B62 L80 Light Blue, B62HW80 Beige
    Number of Coats: 2
    Maximum Field Use Dry Film Thickness (in mils): 16
    Maximum Thinner: 10% R2K4 or Reducer No. 4
    Recoat Cure Time and Temperature: 8 hours at 77°F
    Final Cure Time and Temperature: 5 days at 77°F
    Certified for use with B60V85 Low Temp Hardener only.  Mix ratio of Part A:Part B is 4:1
    by volume.

Coatings - Tank
COROTHANE® I GALVAPAC 2K 100 Two Pack Zinc Primer[7] [8] CLD 23 ZINC
Corothane I Galvapac Zinc Primer[9] [10] CLD 23 ZINC
Dura-Plate 235 PW[1] >= 10,000 gal. CLD 23 EPOXY
Dura-Plate UHS[2] >= 1000 gal. CLD 23 EPOXY
MACROPOXY® 5500 LT [11] CLD 23 EPOXY
MACROPOXY® 5500 PRIMER (RED) LT [11] CLD 23 EPOXY
SherPlate PW[3] >= 100 gal.[4] CLD 23 EPOXY
Tank Clad HS Epoxy[12] >= 60,000 gal. CLD 23 EPOXY
Tank Clad HS Epoxy Low Temp Hardener[6] >= 1000 gal. CLD 23 EPOXY
Zinc Plate Ultra II PCP[13] [14] CLD 23 ZINC

[1] Colors: B67WX235 Off-White, B67HX235 Buff, B67RX235 Red, B67BX235 Black, B67LW236 Blue,
            B67HX236 Light Buff
    Number of Coats: 2
    Sequence of coats: Any combination of listed colors
    Maximum Field Use Dry Film Thickness (in mils): 16
    Maximum Thinner: 10% Reducer R7K104
    Recoat Cure Time and Temperature: 3.5 hours at 25° C
    Final Cure Time and Temperature: 7 days at 25° C
    Special Comments: Mix ratio of Part A:Part B is 4:1 by volume. Induction time is 15
    minutes.
[2] Colors: B62H210 gold (primer), B62L210 blue (primer), B62W212 ultrawhite (topcoat), 
            B62W210 white (topcoat), B62W211 white (topcoat), B62HW0211 Tannery 
            (topcoat), B62V210 hardener, or B62V211 hardener.
    Number of Coats: 2
    Sequence of Coats: Primer, Topcoat
    Maximum Field Use Dry Film Thickness (in mils): Primer 10, Topcoat 14
    Recoat Cure Time and Temperature: 16 hours at 77°F
    Final Cure Time and Temperature: 4 days at  77°F
    Special Comments: Up to 1.5 fl oz of 844-5558 green colorant, AC-9434 green colorant, or
    AC-3738 black colorant may be added to 5 gal. of mixed product. Mix ratio of Part A:Part
    B is 4:1 by volume.
    
    Colors: B62H210 Gold (Primer), B62W210 White (Topcoat), B62W212 UltraWhite (topcoat), 
            B62L210 Blue (Primer), B62W211 White (Topcoat), B62HW0211 Tannery (Topcoat), 
            B62V210 Hardener or B62V211 Hardener
    Number of Coats: 1 - 3	
    Sequence of Coats: B62W210 (for coat 1); BW2W210 or BW2W211 (for coats 2 & 3 if used), 
                       BW2W211 or B62HW0211 (for coats 2 & 3 if used)
    Maximum Field Use Dry Film Thickness (in mils): 50	
    Recoat Cure Time and Temperature: 16 hours at 77°F
    Final Cure Time and Temperature: 4 days at  77°F
    Special Comments: Up to 1.5 fl oz of 844-5558 green colorant, AC-9434 green colorant, or
    AC-3738 black colorant may be added to 5 gal. of mixed product. Mix ratio of Part A:Part
    B is 4:1 by volume.
[3] Colors: Blue, white
    Number of Coats: 1 - 2
    Sequence of Coats: Any
    Maximum Field Use Dry Film Thickness (in mils): 50 for tanks >= 100 gallons and pipes >=
    12"
    Maximum Thinner: None 
    Recoat Cure Time and Temperature: 1 hour at 77°F
    Final Cure Time and Temperature: 24 hours at 77°F for coating tanks >= 100 gallons and
    pipes >= 12"
    Special Comments: Mix ratio of Part A:Part B is 1:1 by volume.
[4] Coatings with a 24 hour final cure time are Certified for use on tanks >= 100 gallons
    and pipes >= 12". Coatings with a 10 day final cure time are Certified for use on pipes
    >= 6".
[6] Colors: B62 W80 Sanitary White, B62 L80 Light Blue, B62HW80 Beige
    Number of Coats: 2
    Maximum Field Use Dry Film Thickness (in mils): 16
    Maximum Thinner: 10% R2K4 or Reducer No. 4
    Recoat Cure Time and Temperature: 8 hours at 77°F
    Final Cure Time and Temperature: 5 days at 77°F
    Certified for use with B60V85 Low Temp Hardener only.  Mix ratio of Part A:Part B is 4:1
    by volume.
[7] Certified for the following sizes:
    >= 200,000 gallons as a single layer topcoat
    >= 4,000 gallons as a primer with any NSF Certified Sherwin-Williams topcoat
[8] Colors: Green
    Number of Coats: 1
    Sequence of Coats: Primer, topcoat (if applicable)
    Maximum Field Use Dry Film Thickness (in mils): 4
    Maximum Thinner: Up to 10% by volume of Reducer R7K111 
    Recoat Cure Time and Temperature: 12 hours at 77°F when used as a primer
    Final Cure Time and Temperature: 7 days at 77°F when used as a top coat
    Special Comments: This primer is Certified as both a single layer (a top coat) and as a
    primer under a topcoat. Mix ratio of Part A (Binder): Part F (Zinc Dust) is 1.76
    gallons: 73 pounds. Kits are supplied premeasured.
[9] Colors: B65G10 Gray/Green, B65G11 Gray/Green, B65RX11 Red,  B65RW11 Red
    Number of Coats: 1
    Sequence of Coats: Primer, Topcoat (if applicable)
    Maximum Field Use Dry Film Thickness (in mils): 6
    Maximum Thinner: 10% of R7K15
    Recoat Cure Time and Temperature: 12 hours at 77°F when used as a primer
    Final Cure Time and Temperature: 7 days at 77°F when used as a topcoat
    Special Comments: This primer is Certified as both a single layer and as a primer under
    a topcoat.  B65G10 Mix ratio of A:F is 6.8:21.8 by weight.  B65G11, B65RW11 and B65RX11
    are a one component material and only needs the thinner added.
[10] Certified for use as a single coat in tanks >= 250,000 gallons.
     Certified for use as a primer in any NSF Certified Sherwin-Williams topcoat system in
     tanks 20,000 gallons and greater.
[11] Colors: Primer (red), Topcoat (Any NSF Certified Topcoat) 
     Number of Coats: 1 
     Maximum Field Use Dry Film Thickness (in mils): 8 (primer) 
     Maximum Thinner: 10% R7K111 
     Final Cure Time and Temperature: Primer (cure before application of topcoat) - 18 hours
     at 40°F 
     Special Comments: For use as a primer under any NSF Certified top coat. The top coat
     must be used at its Certified end use. Mix ratio is 1:1 by volume (for primer).
     Macropoxy 5500 Red Primer LT is certified for use as a primer under any NSF Certified
     Sherwin-Williams Coating for tanks 20,000 gallons or greater.
     Colors: Beige, black, blue, dark red, gray, red, white
     Number of Coats: 1 Primer (optional), 2-3 Topcoat 
     Seq of Coats: Optional Primer (Red only), Topcoat (beige, black, blue, dark red, gray,
     and white)
     Maximum Field Use Dry Film Thickness (in mils): Primer: 8; Topcoat: 15 per coat;
     Complete System: 28 total 
     Maximum Thinner: 10% R7K11 
     Recoat Cure Time and Temperature: 18 hours at 40°F 
     Final Cure Time and Temperature: 7 days at 40°F 
     Special Comments: Mix ratio is 1:1 by volume (for both primer and topcoat)
     The Macropoxy 5500 LT System is certified for tanks 60,000 gallons or greater (Macropoxy
     Red shall only be used as an optional primer and all other color offerings shall only be
     used as topcoats).
[12] Colors: B62 W80 Sanitary White, B62 L80 Light Blue, B62HW80 Beige
     Number of Coats: 2
     Sequence of Coats: Any combination of Listed colors
     Maximum Field Use Dry Film Thickness (in mils): 16
     Maximum Thinner: 10% R2K4 or Reducer No. 4
     Recoat Cure Time and Temperature: 18 hours at 77°F
     Final Cure Time and Temperature: 7 days at 77°F
     Special Comments: Tank Clad HS Epoxy is Certified with B60V80 Hardener. Mix ratio of
     Part A:Part B is 4:1.
[13] Colors: Gray
     Number of Coats: 1
     Sequence of Coats: Primer, Topcoat
     Maximum Field Use Dry Film Thickness (in mils): 1.5
     Maximum Thinner: 25% R7K58 by weight
     Recoat Cure Time and Temperature: 7 days at 77°F
     Special Comments: Certified as a primer under any NSF Certified top coat. The top coat
     must be used at its Certified end use. Mix ratio of Part A (Binder): Part B (Paste) is
     1.74:1 by volume. Kits are supplied premeasured.
[14] Certified for tanks 200,000 gallons or greater when used as a primer under any NSF
     Certified Sherwin-Williams Coating.



Facility : Cincinnati, OH

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Coatings - Fittings[1] [2]
DuraPlate 6000 [4] CLD 23 EPOXY

[1] Colors: Off-White, Gray
    Number of Coats: 1
    Final Cure Time/Temperature: 10 hours at 77°F
    Special Comments: Mix ration of Part A:B is 2:1 by volume.
[2] Special Comments: Maximum dry mil thickness for pipes, fittings and valves: 50 mils.
[4] Special comments:
    Coating with 50 mil film thickness: Certified for fittings and valves >= 2 in.

Coatings - Pipe[1] [3]
DuraPlate 6000 [6] CLD 23 EPOXY

[1] Colors: Off-White, Gray
    Number of Coats: 1
    Final Cure Time/Temperature: 10 hours at 77°F
    Special Comments: Mix ration of Part A:B is 2:1 by volume.
[3] Special Comments: Maximum dry mil thickness for pipe is 50-125 mils.
[6] Special comments:
    Coating with 50 mil film thickness: Certified for pipe >= 4 in.
    Coating with 125 mil film thickness: Certified for pipe >= 6 in.

Coatings - Tank[1] [5]
DuraPlate 6000 [7] CLD 23 EPOXY

[1] Colors: Off-White, Gray
    Number of Coats: 1
    Final Cure Time/Temperature: 10 hours at 77°F
    Special Comments: Mix ration of Part A:B is 2:1 by volume.
[5] Special Comments: Dry mil thickness for tanks: 30-125 mils.
[7] Special Comments:
    Coating with 30 mil film thickness: Certified for use on tanks >= 1000 gallons.
    Coating with 125 mil film thickness: Certified for tanks >= 1000 gallons.

Coatings - Valve[1] [2]
DuraPlate 6000 [4] CLD 23 EPOXY

[1] Colors: Off-White, Gray
    Number of Coats: 1
    Final Cure Time/Temperature: 10 hours at 77°F
    Special Comments: Mix ration of Part A:B is 2:1 by volume.
[2] Special Comments: Maximum dry mil thickness for pipes, fittings and valves: 50 mils.
[4] Special comments:
    Coating with 50 mil film thickness: Certified for fittings and valves >= 2 in.



Facility : Pittsburgh, PA

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Coatings - Pipe
CorroPipe® II PW Ultra[3] >= 48" D. HOT PUR
Corrocote II PW[1] >= 78" D. HOT PUR
Corrocote II PW (AM)[1] >= 78" D. HOT PUR
Corropipe II PW[2] >= 18" CLD 23 PUR
Corropipe II PW (AM)[2] >= 18" CLD 23 PUR

[1] Colors: Off-White, Medium Gray 
    Number of Coats: 1
    Sequence of Coats: Any combination of listed colors
    Maximum Field Use Dry Film Thickness (in mils): 80
    Maximum Thinner: None
    Final Cure Time and Temperature: 48 hours at 75F
    Special Comments: Mix ration of Part A to Part B is 1:1.
[2] Colors: Off-White, Medium Gray, Safety Blue, Light Blue
    Number of Coats: 1
    Sequence of Coats: Any combination of listed colors
    Maximum Field Use Dry Thickness (in mils): 60
    Maximum Thinner: None
    Final Cure Time and Temperature: 5 days at 72F
    Special Comments: Mix ration of Part A:Part B is 1:1 by volume.
[3] Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 60
    Maximum Thinner: None
    Final Cure Time and Temperature: 7 days at 70°F
    Special Comments: Spray application using a plural component heated airless spray unit.
    Mix ratio of Part A to Part B is 1:1 by volume.

Coatings - Tank
Corrocote II PW[1] >= 30,000 gal. D. HOT PUR
Corrocote II PW (AM)[1] >= 30,000 gal. D. HOT PUR
Corropipe II PW (FS)[2] >= 300 gal. CLD 23 PUR
Corropipe II PW (FS) AM[2] >= 300 gal. CLD 23 PUR

[1] Colors: Off-White, Medium Gray 
    Number of Coats: 1
    Sequence of Coats: Any combination of listed colors
    Maximum Field Use Dry Film Thickness (in mils): 80
    Maximum Thinner: None
    Final Cure Time and Temperature: 48 hours at 75F
    Special Comments: Mix ration of Part A to Part B is 1:1.
[2] Colors: Off-White, Medium Gray, Safety Blue, Light Blue
    Number of Coats: 1
    Sequence of Coats: Any combination of listed colors
    Maximum Field Use Dry Thickness (in mils): 60
    Maximum Thinner: None
    Final Cure Time and Temperature: 5 days at 72F
    Special Comments: Mix ration of Part A:Part B is 1:1 by volume.


Number of matching Manufacturers is 1
Number of matching Products is 39
Processing time was 0 seconds