NSF Product and Service Listings

These NSF Official Listings are current as of Monday, January 17, 2022 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=4J620&Standard=061&



NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings.


 
Hempel A/S 
Lundtoftevej 150
2800 Kgs. Lyngby 
Denmark 
45 45 93 38 00
Visit this company's website


Facility : Buk, Poland

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Coatings - Pipe
Hempadur 35560[1] >= 20 cm CLD 23 EPOXY
Hempadur 35569 and Curing Agent 98560[1] >= 20 cm CLD 23 EPOXY

[1] Colors: Cream
    Number of Coats: 2
    Sequence of Coats: Light Red 50900 is first coat and Cream 20320 is second coat.
    Maximum Field Use Dry Film Thickness (in mils): 8 per coat; maximum for system is 16 
    Recoat Cure Time and Temperature: 1 day at 20°C
    Final Cure Time and Temperature: 10 days at 20°C
    Special Comments: Light Red 50900 must be applied first, followed by Cream 20320; final
    color of coating is Cream. Mix ratio of Light Red 50900 and Cream 20320 to converter for
    each coat is 6.8:2 by volume. Induction period is 10 minutes.

Coatings - Tank
Hempadur 35560[1] >= 100 gal. CLD 23 EPOXY
Hempadur 35569 and Curing Agent 98560[1] >= 100 gal. CLD 23 EPOXY

[1] Colors: Cream
    Number of Coats: 2
    Sequence of Coats: Light Red 50900 is first coat and Cream 20320 is second coat.
    Maximum Field Use Dry Film Thickness (in mils): 8 per coat; maximum for system is 16 
    Recoat Cure Time and Temperature: 1 day at 20°C
    Final Cure Time and Temperature: 10 days at 20°C
    Special Comments: Light Red 50900 must be applied first, followed by Cream 20320; final
    color of coating is Cream. Mix ratio of Light Red 50900 and Cream 20320 to converter for
    each coat is 6.8:2 by volume. Induction period is 10 minutes.


Number of matching Manufacturers is 1
Number of matching Products is 4
Processing time was 0 seconds