NSF Product and Service Listings

These NSF Official Listings are current as of Saturday, May 28, 2022 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=55950&Standard=061&



NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings.


 
Coflex S.A. de C.V. 
Hidalgo #602 Pte.
Monterrey, N.L. 64000 
Mexico 
52 818 344 5919
Visit this company's website


Facility : Santa Catarina Nuevo Leon, Mexico

Mechanical Plumbing Devices

Trade Designation      

Flexible Braided Connectors
M(XX)-(Y)(ZZ)      
P(XX)-(Y)(ZZ)      
S(XX)-(Y)(ZZ)      
V(XX)-(Y)(ZZ)      

Flexible Plumbing Connectors[1] [2] [G]
M(XX)-(Y)(ZZ)      
P(XX)-(Y)(ZZ)      
S(XX)-(Y)(ZZ)      
V(XX)-(Y)(ZZ)      

[1] P   -  PVC Reinforced hose without any external braiding material
    S   -  Stainless steel braiding material
    V   -  Vinyl coated braiding material
    M   -  Monofilament braiding
    XX  -  Market destination, code A to ZZ, except for the letters S, L, and I.
    Y   -  End connections
    DN6 (0.21 thru 0.255 inch)  - F1/2", M10x1, M 3/8"
    DN8 (0.275 thru 0.320 inch) - M1/4", M3/8", copper barb
    ZZ  -  Length in inches
    Certified models include descriptions of the hose inliner material type and inner
    diameter. Approved combinations of hose inliner material type, hose inner diameter and
    hose lengths are as follows: 
    
    Certified to the following minimum through maximum length PVC inliner:
    ID 0.210 in.: 11 in. through 91 in.
    ID 0.225 in.: 11 in. through 85 in.
    ID 0.245 in.: 11 in. through 78 in.
    ID 0.250 in.: 20 in. through 77 in.
    ID 0.255 in.: 20 in. through 150 in.
    ID 0.275 in.: 31 in. through 70 in.
    ID 0.300 in.: 31 in. through 64 in.
    ID 0.320 in.: 4 in. through 59 in.
    
    Certified to the following minimum through maximum length for TPV inliner:
    ID 0.210 in.: 20 in. through 80 in.
    ID 0.255 in.: 20 in. through 80 in.
    ID 0.300 in.: 20 in. through 80 in.
    
    Certified for the following minimum and maximum length for TPSiV Inliner:
    ID 0.250 in.: 31 in. through 84 in.
    ID 0.275 in.: 31 in. through 64 in.
    ID 0.300 in.: 31 in. through 70 in.
    ID 0.320 in.: 31 in. through 56 in.
    
    Certified to the following minimum through maximum length for PEX in-liner:
    ID 0.255 in: 20 in. through 60 in.
[2] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Number of matching Manufacturers is 1
Number of matching Products is 8
Processing time was 0 seconds