NSF Product and Service Listings

These NSF Official Listings are current as of Thursday, May 1, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=58420&Standard=061&


NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.

 
Fannteer Corporation 
2F, No. 77, Zhouzi Street
Neihu District 
Taipei City, 114680 
Taiwan 
886-2-2798-6583
Visit this company's website


Facility : # 2 Taiwan

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials
E37049F[G] [1] C. HOT EPDM
EP32670[2] [G] [3] C. HOT EPDM
EP601158C[2] [G] [3] C. HOT EPDM
EP6101 [4] C. HOT EPDM
EP701168B[2] [G] [3] C. HOT EPDM
EP701253C[2] [G] [3] C. HOT EPDM
EP7012OF[2] [G] [3] C. HOT EPDM
EP701414G[2] [G] [3] C. HOT EPDM
EP701443C[2] [G] [7] C. HOT EPDM
EP7069OF[2] [G] [3] C. HOT EPDM
EP70A9OF[2] [G] [3] C. HOT EPDM
EP7101[G] [3] C. HOT EPDM
EP7103 [4] C. HOT EPDM
EP801462C[2] [G] [7] C. HOT EPDM
EP8079OF[2] [G] [3] C. HOT EPDM
EP8101 [4] C. HOT EPDM
N67088F[G] [5] C. HOT NBR
N67588F [G] [5] C. HOT NBR
VI759015A[6] [G] [3] C. HOT FE 

[1] Certified for a maximum surface area to volume ratio of 1.3 square inches/L.
[2] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 square inches/L.
[3] Certified for a maximum surface area to volume ratio of 2.0 square inches/L.
[4] Certified for a maximum surface area to volume ratio of 1.0 square inches/L.
[5] Certified for a maximum surface area to volume ratio of 0.9 square inches/L.
[6] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.37 sq. in./L.
[7] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.0 sq. in./L.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

O-Rings
E37049F[G] [1] C. HOT EPDM
EP32670[2] [G] [3] C. HOT EPDM
EP601158C[2] [G] [3] C. HOT EPDM
EP6101 [4] C. HOT EPDM
EP701168B[2] [G] [3] C. HOT EPDM
EP701253C[2] [G] [3] C. HOT EPDM
EP7012OF[2] [G] [3] C. HOT EPDM
EP701414G[2] [G] [3] C. HOT EPDM
EP701443C[2] [G] [7] C. HOT EPDM
EP7069OF[2] [G] [3] C. HOT EPDM
EP70A9OF[2] [G] [3] C. HOT EPDM
EP7101[G] [4] C. HOT EPDM
EP7103 [4] C. HOT EPDM
EP801462C[2] [G] [7] C. HOT EPDM
EP8079OF[2] [G] [3] C. HOT EPDM
EP8101 [4] C. HOT EPDM
N67088F[G] [5] C. HOT NBR
N67588F[G] [5] C. HOT NBR
VI759015A[6] [G] [3] C. HOT FE 

[1] Certified for a maximum surface area to volume ratio of 1.3 square inches/L.
[2] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 square inches/L.
[3] Certified for a maximum surface area to volume ratio of 2.0 square inches/L.
[4] Certified for a maximum surface area to volume ratio of 1.0 square inches/L.
[5] Certified for a maximum surface area to volume ratio of 0.9 square inches/L.
[6] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.37 sq. in./L.
[7] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.0 sq. in./L.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.



Facility : Shanghai, China

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials
E37049F[G] [1] C. HOT EPDM
EP32670[2] [G] [3] C. HOT EPDM
EP601158C[2] [G] [3] C. HOT EPDM
EP6101 [4] C. HOT EPDM
EP701168B[2] [G] [3] C. HOT EPDM
EP701253C[2] [G] [3] C. HOT EPDM
EP7012OF[2] [G] [3] C. HOT EPDM
EP701414G[2] [G] [3] C. HOT EPDM
EP701443C[G] [3] [8] C. HOT EPDM
EP7069OF[2] [G] [3] C. HOT EPDM
EP70A9OF[2] [G] [3] C. HOT EPDM
EP7101[G] [5] C. HOT EPDM
EP7103 [4] C. HOT EPDM
EP801462C[G] [3] [8] C. HOT EPDM
EP8079OF[2] [G] [3] C. HOT EPDM
EP8101 [4] C. HOT EPDM
MQ7001[2] [G] [3] C. HOT SLC
N67088F[G] [6] C. HOT NBR
N67588F[G] [6] C. HOT NBR
N7101[G] [4] C. HOT NBR
N7521 [4] C. HOT NBR
N8101 [4] C. HOT NBR
N9021F [4] C. HOT NBR
N9101 [4] C. HOT NBR
SI603073[2] [G] [3] C. HOT SLC
SI702002[2] [G] [3] C. HOT SLC
VI759015A[7] [G] [3] C. HOT FE 

[1] Certified for a maximum surface area to volume ratio of 1.3 sq. in./L.
[2] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[3] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[4] Certified for a maximum surface area to volume ratio of 1 sq. in./L.
[5] Certified for a maximum surface area to volume ratio of 1.5 sq. in./L.
[6] Certified for a maximum surface area to volume ratio of 0.9 sq. in./L.
[7] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.18 sq. in./L.
[8] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.0 sq. in./L.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

O-Rings [G]
E37049F [1] C. HOT EPDM
EP32670[2] [3] C. HOT EPDM
EP601158C[2] [3] C. HOT EPDM
EP701168B[2] [3] C. HOT EPDM
EP701253C[2] [3] C. HOT EPDM
EP7012OF[2] [3] C. HOT EPDM
EP701414G[2] [3] C. HOT EPDM
EP701443C [3] [8] C. HOT EPDM
EP7069OF[2] [3] C. HOT EPDM
EP70A9OF[2] [3] C. HOT EPDM
EP801462C [3] [8] C. HOT EPDM
EP8079OF[2] [3] C. HOT EPDM
MQ7001[2] [3] C. HOT SLC
N67088F [6] C. HOT NBR
N67588F [6] C. HOT NBR
SI603073[2] [3] C. HOT SLC
SI702002[2] [3] C. HOT SLC
VI759015A[7] [3] C. HOT FE 

[1] Certified for a maximum surface area to volume ratio of 1.3 sq. in./L.
[2] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[3] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[6] Certified for a maximum surface area to volume ratio of 0.9 sq. in./L.
[7] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.18 sq. in./L.
[8] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.0 sq. in./L.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Number of matching Manufacturers is 1
Number of matching Products is 83
Processing time was 0 seconds