NSF Product and Service Listings

These NSF Official Listings are current as of Tuesday, February 4, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=72150&Standard=061&


NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.

 
Hun-Yi Rubber Industrial Co., Ltd. 
No. 40, Lane 193, Hochen Road
Homai Town, Changhua Country 
Taiwan 
886 4 755 1315


Facility : Changhua Hsien, Taiwan

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials
SE-419F[1] [2] C. HOT EPDM
SE-519F[3] [2] C. HOT EPDM
SE-606F[4] [5] C. HOT EPDM
SE-619F [2] C. HOT EPDM
SE-629PF [2] C. HOT EPDM
SE-706F[4] [5] C. HOT EPDM
SE-719F [2] C. HOT EPDM
SE-729PF [2] C. HOT EPDM
SE-756F[4] [5] C. HOT EPDM
SE-819F [2] C. HOT EPDM
SE-829PF [2] C. HOT EPDM
SE-919F [2] C. HOT EPDM
SI-XXY[6] [7] [8] C. HOT SLC
SN-419F [9] C. HOT NBR
SN-519F [9] C. HOT NBR
SN-619F [9] C. HOT NBR
SN-719F [9] C. HOT NBR
SN-819F [9] C. HOT NBR
SN-919F[10] [5] C. HOT NBR 

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.1 sq. in/L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.2 sq. in/L.
[4] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.0 sq. in./L.
[5] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[6] SI-XXY
    XX - Shore A - 30, 40, 50, 60, 70, 80, 90
    Y - Colour
    T - Translucent
    R - Red
    B - Blue
[7] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 5.0 sq. in./L.
[8] Certified for a maximum surface area to volume ratio of 5.0 sq. in./L.
[9] Certified for a maximum surface area to volume ratio of 1.0 sq. in./L.
[10] This product has also been evaluated for use in Mechanical Plumbing Device applications
     with a maximum use restriction of 0.02 sq. in./L.

O-Rings
SE-419F[1] [2] C. HOT EPDM
SE-519F[3] [2] C. HOT EPDM
SE-606F[4] [5] C. HOT EPDM
SE-629PF [2] C. HOT EPDM
SE-706F[4] [5] C. HOT EPDM
SE-729PF [2] C. HOT EPDM
SE-756F[4] [5] C. HOT EPDM
SE-829PF [2] C. HOT EPDM
SI-XXY[6] [7] [8] C. HOT SLC 

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.1 sq. in/L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.2 sq. in/L.
[4] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.0 sq. in./L.
[5] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[6] SI-XXY
    XX - Shore A - 30, 40, 50, 60, 70, 80, 90
    Y - Colour
    T - Translucent
    R - Red
    B - Blue
[7] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 5.0 sq. in./L.
[8] Certified for a maximum surface area to volume ratio of 5.0 sq. in./L.


Mechanical Plumbing Devices

Trade Designation      

Gasket/Sealing Materials[1]
SE-619F[2]      
SE-629PF[3]      
SE-719F[2]      
SE-729PF[3]      
SE-819F[2]      
SE-829PF[3]      
SE-919F[2]       

[2] Certified for a maximum surface area to volume ratio of 0.2 sq. in./L.
[3] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.


[1] This product does not require a Q statistic. It is made from material or materials that
    do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3.

O-Rings[1]
SE-629PF[3]      
SE-729PF[3]      
SE-829PF[3]       

[3] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.


[1] This product does not require a Q statistic. It is made from material or materials that
    do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3.

Number of matching Manufacturers is 1
Number of matching Products is 38
Processing time was 0 seconds