NSF Product and Service Listings

These NSF Official Listings are current as of Wednesday, January 15, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=73940&Standard=061&


NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.

 
Ar-Tex S.P.A. 
Via Rasetti 12
24060 Viadanica 
Italy 
390 35 928585


Facility : Jiangsu, China

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials
4270[1] [2] [3] C. HOT EPDM 

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[2] This product does not require a Q statistic. It is made from material or materials that
    do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3.
[3] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.

O-Rings
4270[1] [2] [3] C. HOT EPDM 

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[2] This product does not require a Q statistic. It is made from material or materials that
    do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3.
[3] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.



Facility : Viadanica, Italy

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

O-Rings
0477[1] [2] [3] D. HOT NBR
2061[1] [2] [3] C. HOT SLC
2172[1] [2] [3] C. HOT SLC
3272[1] [2] [3] C. HOT FE
4270[2] [4] [5] C. HOT EPDM
4273 [6] C. HOT EPDM
4280[1] [2] [3] C. HOT EPDM
4360 [5] C. HOT EPDM 

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[2] This product does not require a Q statistic. It is made from material or materials that
    do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3.
[3] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[4] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 9 sq. in./L.
[5] Certified for a maximum surface area to volume ratio of 30.0 sq. in./L.
[6] Certified for a maximum surface area to volume ratio of 14 sq. in./L.

Gasket/Sealing Materials
0477[1] [2] [3] D. HOT NBR
2061[1] [2] [3] C. HOT SLC
2172[1] [2] [3] C. HOT SLC
3272[1] [2] [3] C. HOT FE
4270[2] [4] [5] C. HOT EPDM
4273 [6] C. HOT EPDM
4280[1] [2] [3] C. HOT EPDM
4285[1] [2] [3] C. HOT EPDM
4360 [5] C. HOT EPDM 

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[2] This product does not require a Q statistic. It is made from material or materials that
    do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3.
[3] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[4] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 9 sq. in./L.
[5] Certified for a maximum surface area to volume ratio of 30.0 sq. in./L.
[6] Certified for a maximum surface area to volume ratio of 14 sq. in./L.


Mechanical Plumbing Devices

Trade Designation      

O-Rings[1]
4273[3]      
4360[2]       

[2] Certified for a maximum surface area to volume ratio of 30.0 sq. in./L.
[3] Certified for a maximum surface area to volume ratio of 9.5 sq. in./L.


[1] This product does not require a Q statistic. It is made from material or materials that
    do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3.

Gasket/Sealing Materials[1]
4273[3]      
4360[2]       

[2] Certified for a maximum surface area to volume ratio of 30.0 sq. in./L.
[3] Certified for a maximum surface area to volume ratio of 9.5 sq. in./L.


[1] This product does not require a Q statistic. It is made from material or materials that
    do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3.



Facility : Queretaro, México

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials
4270[1] [2] [3] C. HOT EPDM 

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 square inches/L.
[2] This product does not require a Q statistic. It is made from material or materials that
    do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3.
[3] Certified for a maximum surface area to volume ratio of 2.0 square inches/L.

O-Rings
4270[1] [2] [3] C. HOT EPDM 

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 square inches/L.
[2] This product does not require a Q statistic. It is made from material or materials that
    do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3.
[3] Certified for a maximum surface area to volume ratio of 2.0 square inches/L.

Number of matching Manufacturers is 1
Number of matching Products is 25
Processing time was 0 seconds