NSF Product and Service Listings

These NSF Official Listings are current as of Saturday, May 28, 2022 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=80810&Standard=061&


NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings.

 
GE Mao Rubber Industrial Co., Ltd. 
No. 15, Kung-Yeh East 4th Road
Lu-Kang Chen, Changhua Hsien 
Taiwan 
886 4 781 0288
Visit this company's website


Facility : Zhan-Shan City, China

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials
E7041 AA[1] [2] C. HOT EPDM
E7042AA [2] C. HOT EPDM
E7051AA[3] [2] C. HOT EPDM
H7045AA[4] [2] C. HOT HNBR
H7545AA[4] [2] C. HOT HNBR
H8045AA[4] [2] C. HOT HNBR
H8545AA[4] [2] C. HOT HNBR
N7041 AA[5] [2] D. HOT NBR
S4031AB [2] C. HOT SLC
S4031AY [2] C. HOT SLC
S5031AY [2] C. HOT SLC
S5131AB [2] C. HOT SLC
S6031AY [2] C. HOT SLC
S6131AB [2] C. HOT SLC
S7031AB [2] C. HOT SLC
S7031AY [2] C. HOT SLC
S8031AY [2] C. HOT SLC
S8131AB [2] C. HOT SLC 

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum surface area to volume ratio of 2.0 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum surface area to volume ratio of 0.4 sq. in./L.
[4] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum surface area to volume ratio of 0.2 sq. in./L.
[5] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum surface area to volume ratio of 0.3 sq. in./L.

O-Rings
E7041 AA[1] [2] C. HOT EPDM
E7042AA [2] C. HOT EPDM
E7051AA[3] [2] C. HOT EPDM
H7045AA[4] [2] C. HOT HNBR
H7545AA[4] [2] C. HOT HNBR
H8045AA[4] [2] C. HOT HNBR
H8545AA[4] [2] C. HOT HNBR
N7041 AA[5] [2] D. HOT NBR
S4031AB [2] C. HOT SLC
S4031AY [2] C. HOT SLC
S5031AY [2] C. HOT SLC
S5131AB [2] C. HOT SLC
S6031AY [2] C. HOT SLC
S6131AB [2] C. HOT SLC
S7031AB [2] C. HOT SLC
S7031AY [2] C. HOT SLC
S8031AY [2] C. HOT SLC
S8131AB [2] C. HOT SLC 

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum surface area to volume ratio of 2.0 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum surface area to volume ratio of 0.4 sq. in./L.
[4] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum surface area to volume ratio of 0.2 sq. in./L.
[5] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum surface area to volume ratio of 0.3 sq. in./L.


Mechanical Plumbing Devices

Trade Designation      

Gasket/Sealing Materials
E7042AA[1]       

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.

O-Rings
E7042AA[1]       

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.



Facility : Chonburi, Thailand

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

O-Rings, Gasket/Sealing Materials
E7041 AA [1] [2] C. HOT EPDM
E7051 AA [1] [3] C. HOT EPDM
N7041 AA [1] [4] D. HOT NBR 

[1] Certified for a maximum surface area to volume ratio of 2.0 sq.in./L.
[2] Evaluated as material for use in mechanical plumbing devices for applications with a
    maximum of 2.0 square inchs per liter.
[3] Evaluated as material for use in mechanical plumbing devices for applications with a
    maximum of 0.4 square inchs per liter.
[4] Evaluated as material for use in mechanical plumbing devices for applications with a
    maximum of 0.6 square inchs per liter.

Number of matching Manufacturers is 1
Number of matching Products is 41
Processing time was 0 seconds