NSF Product and Service Listings

These NSF Official Listings are current as of Tuesday, December 23, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=80950&Standard=061&


NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.

 
Jungwoo Metal Ind. Co., Ltd. (JWM) 
#71-30, Gamaksan-ro, 199beon-gil
Nam-myeon, Yangju-si 
Gyeonggi-do 11407 
Republic of Korea 
82 31 860 0660


Facility : Santa Fe Springs, CA

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[1] [G]
Copper Alloy Press-Connect Pressure Fittings 1/8" - 2" C. HOT BRASS 

[1] 90° Elbow Drop Ear PXF 1/2" x 3/8" - 1" x 1"
    90° Elbow Brass PXF 1/2" x 3/8" - 2" x 2"
    90° Elbow HI Ear PXF 1/2"
    Elbow Double Drop PXPXF 1/2" - 3/4"
    Union PxP 1/2" - 2"
    Union PxF 1/2" - 2"
    Union PxM 1/2" - 2"
    Vent Elbow PXPXF 1/2" x 1/2" x 1/8" - 3/4" x 3/4" x 1/8"
    
    
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : Kyunggi-Do, Korea, Republic of

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings, Non-Repeating[G]
Di-electric union, PXF 1/2" - 2" C. HOT MLTPL 

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Fittings [G]
Copper Press-connect Pressure Fittings[2] 1/2" - 4" C. HOT MLTPL
Wrought Copper Fittings and Adaptors[1] 1/8" - 12" C. HOT CU 

[1] Certified for the following configurations:
    
    90º Elbow CXC 1/8" - 12" (6 mm - 300mm)
    90º Elbow CXC DWV - 1/8" - 12" (6 mm - 300mm)
    90º Elbow FtgXC 1/8" - 12" (6 mm - 300mm)
    90º Elbow FtgXC DWV - 1/8" - 12" (6 mm - 300mm)
    Long Radius 90º Elbow CXC 1/8" - 12" (6 mm - 300mm)
    Long Radius 90º Elbow FtgXC 1/8" - 12" (6 mm - 300mm)
    45º Elbow CXC 1/8" - 12" (6 mm - 300mm)
    45º Elbow CXC DWV 1/8" - 12" (6 mm - 300mm)
    45º Elbow FtgXC 1/8" - 12" (6 mm - 300mm)
    45º Elbow FtgXC DWV 1/8" - 12" (6 mm - 300mm)
    Cap 1/8" - 12" (6 mm - 300mm)
    Cap DWV 1/8" - 12" (6 mm - 300mm)
    Adapter CXF 1/8" - 12" (6 mm - 300mm)
    Adapter CXF DWV 1/8" - 12" (6 mm - 300mm)
    Adapter CXM 1/8" - 12" (6 mm - 300mm)
    Adapter CXM DWV 1/8" - 12" (6 mm - 300mm)
    Adapter FtgXF 1/8" - 12" (6 mm - 300mm)
    Adapter FtgXM 1/8" - 12" (6 mm - 300mm)
    With Stop Coupling 1/8" - 12" (6 mm - 300mm)
    Roll Stop Coupling CXC 1/8" - 12" (6 mm - 300mm)
    Roll Stop Coupling DWV 1/8" - 12" (6 mm - 300mm)
    No Stop Coupling CXC 1/8" - 12" (6 mm - 300mm)
    Reducing Coupling CXC 1/8" - 12" (6 mm - 300mm)
    Reducing Coupling FtgXC 1/8" - 12" (6 mm - 300mm)
    Reducing Coupling FtgXC DWV 1/8" - 12" (6 mm - 300mm)
    Tee 1/8" - 12" (6 mm - 300mm)
    Tee DWV 1/8" - 12" (6 mm - 300mm)
    Crossover CXC 1/8" - 4" (6 mm - 100mm)
    P Trap 1/8" - 4" (6 mm - 100mm)
    Return Bend 1/8" - 4" (6 mm - 100mm)
    Bushing FtgXC 1/8" - 4" (6 mm - 100mm)
    Bushing FtgXF 1/8" - 4" (6 mm - 100mm)
    FLUG 1/8" - 4" (6 mm - 100mm)
    Grooved 90° Elbow 1/8" - 12" (6 mm - 300mm)
    Grooved 45° Elbow 1/8" - 12" (6 mm - 300mm)
    Grooved TEE 1/8" - 12" (6 mm - 300mm)
    Grooved Concentric Reducer 1/8" - 12" (6 mm - 300mm)
    Grooved End Cap 1/8" - 12" (6 mm - 300mm)
    Grooved Flange Adapter 1/8" - 12" (6 mm - 300mm)
    Flange Adapter 1/8" - 12" (6 mm - 300mm)
    Air-chamber 1/8" - 12" (6 mm - 300mm)
[2] Certified for the following configurations:
    
    90º Elbow PXP 1/2" - 4"
    90º Elbow FtgXP 1/2" - 4"
    Short Turn 90° Elbow PXP 1/2" - 4"
    Short Turn 90° Elbow FtgXP 1/2" - 4"
    45º Elbow PXP 1/2" - 4"
    45º Elbow FtgXP 1/2" - 4"
    Short Turn 45° Elbow PXP 1/2" - 4"
    Short Turn 45° Elbow FtgXP 1/2" - 4"
    Cap 1/2" - 4"
    Adapter PXF 1/2" - 4"
    Adapter PxM 1/2" - 4"
    Roll Stop Coupling PXP 1/2" - 4"
    No Stop Coupling PXP 1/2" - 4"
    With Stop Coupling 1/2" - 4"
    Reducing Coupling PXP 3/4" x 1/2" - 4" x 3"
    Reducing Coupling FtgXP 3/4" x 1/2" - 4" x 3"
    Tee PXPXP 1/2" - 4"
    Crossover PXP 1/2" - 3/4"
    Crossover FtgXP 1/2" - 3/4"
    Extended Coupling PXP 1/2" - 2"
    Adapter Ftg x F 1/2" - 2"
    Adapter Ftg x M 1/2" - 2"
    90° ELBOW P x F 1/2" - 2"
    90° ELBOW P x M 1/2" - 2"
    90° EXTENDED STREET ELBOW P x Ftg 3/4"
    TEE P x P x F 1/2" - 4"
    TEE P x F x P 1/2" - 2"
    Adapter Flange P x Flange (4BOLT) 1/2" - 4"
    Adapter Flange P x Flange (8BOLT) 2 1/2" - 4"
    MANIFOLDS P x P 1" x 1/2" - 1" x 3/4"
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Number of matching Manufacturers is 1
Number of matching Products is 4
Processing time was 0 seconds