NSF Product and Service Listings
These NSF Official Listings are current as of Friday, December 26, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=81200&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
| Global Polyacetal Co., Ltd. | |
| Shiodome Sumitomo-Bldg. 25F, 9-2 | |
| Higashi-shinbashi 1-chome | |
| Minato-ku, Tokyo 105-0021 | |
| Japan | |
| 81 3 3283 4850 | |
| Visit this company's website |
Facility : Mie-gun, Mie, Japan
Potable Water Materials
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | End Use | Temp | Material | |
|
Potable Water Materials |
||||
| Iupiace GH20W | A,F,P | C. HOT | PPE | |
| Iupiace GH30W | A,F,P | C. HOT | PPE | |
Facility : Chachoengsao, Thailand
Potable Water Materials
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | End Use | Temp | Material | |
|
Potable Water Materials |
||||
| Iupital FG2025MZ[1] | A,F,P | C. HOT | POM | |
[1] Certified for a maximum surface area to volume ratio of 40 sq. in./L. |
||||
Facility : Rayong, Thailand
Potable Water Materials
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | End Use | Temp | Material | |
|
Potable Water Materials |
||||
| Iupital F10-EW[1] | A,F,P | C. HOT | POM | |
| Iupital F10-EW2 | A,F,P | C. HOT | POM | |
| Iupital F20-EW[2] | A,F,P | C. HOT | POM | |
[1] Certified for a maximum surface area to volume ratio of 215 sq.in./L. [2] Certified for a maximum surface area to volume ratio of 250 sq. in./L. |
||||
Number of matching Manufacturers is 1
Number of matching Products is 6
Processing time was 0 seconds
