NSF Product and Service Listings

These NSF Official Listings are current as of Thursday, January 20, 2022 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0002620&Standard=061&



NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings.


 
SIP Industries / Serampore 
2900 Patio Drive
Houston, TX 77017 
United States 
713-923-6111
Visit this company's website


Facility : Houston, TX

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[1] [G]
Ductile Iron 45° PO Laterals 2" - 60" CLD 23 PEC
Ductile Iron 45° PO Laterals 2" - 60" CLD 23 ASPH
Ductile Iron Blind Flanges 2" - 60" CLD 23 ASPH
Ductile Iron Blind Flanges 2" - 60" CLD 23 PEC
Ductile Iron FE x MJ Reducers 2" - 60" CLD 23 PEC
Ductile Iron FE x MJ Reducers 2" - 60" CLD 23 ASPH
Ductile Iron Flange Spools 2" - 60" CLD 23 PEC
Ductile Iron Flange Spools 2" - 60" CLD 23 ASPH
Ductile Iron Flanged 11.25° Flange Bends 2" - 60" CLD 23 PEC
Ductile Iron Flanged 11.25° Flange Bends 2" - 60" CLD 23 ASPH
Ductile Iron Flanged 22.5° Flange Bends 2" - 60" CLD 23 PEC
Ductile Iron Flanged 22.5° Flange Bends 2" - 60" CLD 23 ASPH
Ductile Iron Flanged 45° Flange Bends 2" - 60" CLD 23 PEC
Ductile Iron Flanged 45° Flange Bends 2" - 60" CLD 23 ASPH
Ductile Iron Flanged 90° Flange Bends 2" - 60" CLD 23 ASPH
Ductile Iron Flanged 90° Flange Bends 2" - 60" CLD 23 PEC
Ductile Iron Flanged 90° Flange x Flare Bends 2" - 60" CLD 23 ASPH
Ductile Iron Flanged 90° Flange x Flare Bends 2" - 60" CLD 23 PEC
Ductile Iron Flanged 90° Long Radius Base Bends 2" - 60" CLD 23 PEC
Ductile Iron Flanged 90° Long Radius Base Bends 2" - 60" CLD 23 ASPH
Ductile Iron Flanged 90° Long Radius Base Tees 2" - 60" CLD 23 PEC
Ductile Iron Flanged 90° Long Radius Base Tees 2" - 60" CLD 23 ASPH
Ductile Iron Flanged 90° Long Radius Bends 2" - 60" CLD 23 ASPH
Ductile Iron Flanged 90° Long Radius Bends 2" - 60" CLD 23 PEC
Ductile Iron Flanged 90° Reducing Base Bends 2" - 60" CLD 23 PEC
Ductile Iron Flanged 90° Reducing Base Bends 2" - 60" CLD 23 ASPH
Ductile Iron Flanged 90° Reducing Bends 2" - 60" CLD 23 PEC
Ductile Iron Flanged 90° Reducing Bends 2" - 60" CLD 23 ASPH
Ductile Iron Flanged Crosses 2" - 60" CLD 23 ASPH
Ductile Iron Flanged Crosses 2" - 60" CLD 23 PEC
Ductile Iron Flanged Lateral Wyes 2" - 60" CLD 23 ASPH
Ductile Iron Flanged Lateral Wyes 2" - 60" CLD 23 PEC
Ductile Iron Flanged Long Radius 90° Flange x Flare Bends 2" - 60" CLD 23 PEC
Ductile Iron Flanged Long Radius 90° Flange x Flare Bends 2" - 60" CLD 23 ASPH
Ductile Iron Flanged Reducers 2" - 60" CLD 23 ASPH
Ductile Iron Flanged Reducers 2" - 60" CLD 23 PEC
Ductile Iron Flanged Tees 2" - 60" CLD 23 PEC
Ductile Iron Flanged Tees 2" - 60" CLD 23 ASPH
Ductile Iron Flanged True Wyes 2" - 60" CLD 23 PEC
Ductile Iron Flanged True Wyes 2" - 60" CLD 23 ASPH
Ductile Iron Hydrant Buries 2" - 60" CLD 23 PEC
Ductile Iron Hydrant Buries 2" - 60" CLD 23 ASPH
Ductile Iron Hydrant Extensions 2" - 60" CLD 23 ASPH
Ductile Iron Hydrant Extensions 2" - 60" CLD 23 PEC
Ductile Iron MJ Laterals 2" - 60" CLD 23 ASPH
Ductile Iron MJ Laterals 2" - 60" CLD 23 PEC
Ductile Iron MJ Reducers 2" - 60" CLD 23 ASPH
Ductile Iron MJ Reducers 2" - 60" CLD 23 PEC
Ductile Iron MJ x Dual Purpose Sleeves w/ Oversize Glands 2" - 60" CLD 23 PEC
Ductile Iron MJ x Dual Purpose Sleeves w/ Oversize Glands 2" - 60" CLD 23 ASPH
Ductile Iron MJ x FE 2" - 60" CLD 23 ASPH
Ductile Iron MJ x FE 2" - 60" CLD 23 PEC
Ductile Iron MJ x FE 11.25° Bends 2" - 60" CLD 23 ASPH
Ductile Iron MJ x FE 11.25° Bends 2" - 60" CLD 23 PEC
Ductile Iron MJ x FE 22.5° Bends 2" - 60" CLD 23 PEC
Ductile Iron MJ x FE 22.5° Bends 2" - 60" CLD 23 ASPH
Ductile Iron MJ x FE 45° Bends 2" - 60" CLD 23 PEC
Ductile Iron MJ x FE 45° Bends 2" - 60" CLD 23 ASPH
Ductile Iron MJ x FE 90° Bends 2" - 60" CLD 23 PEC
Ductile Iron MJ x FE 90° Bends 2" - 60" CLD 23 ASPH
Ductile Iron MJ x FE Adapters 2" - 60" CLD 23 ASPH
Ductile Iron MJ x FE Adapters 2" - 60" CLD 23 PEC
Ductile Iron MJ x FE Crosses 2" - 60" CLD 23 PEC
Ductile Iron MJ x FE Crosses 2" - 60" CLD 23 ASPH
Ductile Iron MJ x FE Reducers 2" - 60" CLD 23 ASPH
Ductile Iron MJ x FE Reducers 2" - 60" CLD 23 PEC
Ductile Iron MJ x FE Tees 2" - 60" CLD 23 ASPH
Ductile Iron MJ x FE Tees 2" - 60" CLD 23 PEC
Ductile Iron MJ x Large End Bell Reducers 2" - 60" CLD 23 ASPH
Ductile Iron MJ x Large End Bell Reducers 2" - 60" CLD 23 PEC
Ductile Iron MJ x MJ 2" - 60" CLD 23 ASPH
Ductile Iron MJ x MJ 2" - 60" CLD 23 PEC
Ductile Iron MJ x MJ 11.25° Bends 2" - 60" CLD 23 ASPH
Ductile Iron MJ x MJ 11.25° Bends 2" - 60" CLD 23 PEC
Ductile Iron MJ x MJ 22.5° Bends 2" - 60" CLD 23 PEC
Ductile Iron MJ x MJ 22.5° Bends 2" - 60" CLD 23 ASPH
Ductile Iron MJ x MJ 45° Bends 2" - 60" CLD 23 ASPH
Ductile Iron MJ x MJ 45° Bends 2" - 60" CLD 23 PEC
Ductile Iron MJ x MJ 90° Bends 2" - 60" CLD 23 ASPH
Ductile Iron MJ x MJ 90° Bends 2" - 60" CLD 23 PEC
Ductile Iron MJ x MJ Crosses 2" - 60" CLD 23 PEC
Ductile Iron MJ x MJ Crosses 2" - 60" CLD 23 ASPH
Ductile Iron MJ x MJ Offsets 2" - 60" CLD 23 ASPH
Ductile Iron MJ x MJ Offsets 2" - 60" CLD 23 PEC
Ductile Iron MJ x MJ Tapped Cross 2" - 60" CLD 23 ASPH
Ductile Iron MJ x MJ Tapped Cross 2" - 60" CLD 23 PEC
Ductile Iron MJ x MJ Tapped Tees 2" - 60" CLD 23 ASPH
Ductile Iron MJ x MJ Tapped Tees 2" - 60" CLD 23 PEC
Ductile Iron MJ x MJ Tees 2" - 60" CLD 23 ASPH
Ductile Iron MJ x MJ Tees 2" - 60" CLD 23 PEC
Ductile Iron MJ x PE 11.25° Bends 2" - 60" CLD 23 PEC
Ductile Iron MJ x PE 11.25° Bends 2" - 60" CLD 23 ASPH
Ductile Iron MJ x PE 22.5° Bends 2" - 60" CLD 23 PEC
Ductile Iron MJ x PE 22.5° Bends 2" - 60" CLD 23 ASPH
Ductile Iron MJ x PE 45° Bends 2" - 60" CLD 23 PEC
Ductile Iron MJ x PE 45° Bends 2" - 60" CLD 23 ASPH
Ductile Iron MJ x PE 90° Bends 2" - 60" CLD 23 ASPH
Ductile Iron MJ x PE 90° Bends 2" - 60" CLD 23 PEC
Ductile Iron MJ x PE Cutting In Sleeve with Over Size Gland 2" - 60" CLD 23 ASPH
Ductile Iron MJ x PE Cutting In Sleeve with Over Size Gland 2" - 60" CLD 23 PEC
Ductile Iron MJ x PE Offsets 2" - 60" CLD 23 ASPH
Ductile Iron MJ x PE Offsets 2" - 60" CLD 23 PEC
Ductile Iron MJ x PE x MJ Tees 2" - 60" CLD 23 PEC
Ductile Iron MJ x PE x MJ Tees 2" - 60" CLD 23 ASPH
Ductile Iron MJ x ST 2" - 60" CLD 23 PEC
Ductile Iron MJ x ST 2" - 60" CLD 23 ASPH
Ductile Iron MJ x Small End Bell Reducers 2" - 60" CLD 23 ASPH
Ductile Iron MJ x Small End Bell Reducers 2" - 60" CLD 23 PEC
Ductile Iron MJ x Swivel Hydrant Tees w/ Swivel Gland 2" - 60" CLD 23 ASPH
Ductile Iron MJ x Swivel Hydrant Tees w/ Swivel Gland 2" - 60" CLD 23 PEC
Ductile Iron PE x PE Reducers 2" - 60" CLD 23 ASPH
Ductile Iron PE x PE Reducers 2" - 60" CLD 23 PEC
Ductile Iron PO Crosses 2" - 60" CLD 23 ASPH
Ductile Iron PO Crosses 2" - 60" CLD 23 PEC
Ductile Iron PO Reducers 2" - 60" CLD 23 PEC
Ductile Iron PO Reducers 2" - 60" CLD 23 ASPH
Ductile Iron PO Solid & Tapped Caps 2" - 60" CLD 23 PEC
Ductile Iron PO Solid & Tapped Caps 2" - 60" CLD 23 ASPH
Ductile Iron PO Solid & Tapped Plugs 2" - 60" CLD 23 PEC
Ductile Iron PO Solid & Tapped Plugs 2" - 60" CLD 23 ASPH
Ductile Iron PO Solid Plugs with Set Screws 2" - 60" CLD 23 PEC
Ductile Iron PO Solid Plugs with Set Screws 2" - 60" CLD 23 ASPH
Ductile Iron PO Tapped Plugs with Set Screws 2" - 60" CLD 23 ASPH
Ductile Iron PO Tapped Plugs with Set Screws 2" - 60" CLD 23 PEC
Ductile Iron PO x FE 11.25° Bends 2" - 60" CLD 23 ASPH
Ductile Iron PO x FE 11.25° Bends 2" - 60" CLD 23 PEC
Ductile Iron PO x FE 22.5° Bends 2" - 60" CLD 23 ASPH
Ductile Iron PO x FE 22.5° Bends 2" - 60" CLD 23 PEC
Ductile Iron PO x FE 45° Bends 2" - 60" CLD 23 PEC
Ductile Iron PO x FE 45° Bends 2" - 60" CLD 23 ASPH
Ductile Iron PO x FE 90° Bends 2" - 60" CLD 23 PEC
Ductile Iron PO x FE 90° Bends 2" - 60" CLD 23 ASPH
Ductile Iron PO x FE Adapters 2" - 60" CLD 23 PEC
Ductile Iron PO x FE Adapters 2" - 60" CLD 23 ASPH
Ductile Iron PO x FE Tees 2" - 60" CLD 23 ASPH
Ductile Iron PO x FE Tees 2" - 60" CLD 23 PEC
Ductile Iron PO x LEB Reducers 2" - 60" CLD 23 ASPH
Ductile Iron PO x LEB Reducers 2" - 60" CLD 23 PEC
Ductile Iron PO x PE 11.25° Bends 2" - 60" CLD 23 PEC
Ductile Iron PO x PE 11.25° Bends 2" - 60" CLD 23 ASPH
Ductile Iron PO x PE 22.5° Bends 2" - 60" CLD 23 PEC
Ductile Iron PO x PE 22.5° Bends 2" - 60" CLD 23 ASPH
Ductile Iron PO x PE 45° Bends 2" - 60" CLD 23 ASPH
Ductile Iron PO x PE 45° Bends 2" - 60" CLD 23 PEC
Ductile Iron PO x PE 90° Bends 2" - 60" CLD 23 ASPH
Ductile Iron PO x PE 90° Bends 2" - 60" CLD 23 PEC
Ductile Iron PO x PE Offsets 2" - 60" CLD 23 PEC
Ductile Iron PO x PE Offsets 2" - 60" CLD 23 ASPH
Ductile Iron PO x PE Tees 2" - 60" CLD 23 ASPH
Ductile Iron PO x PE Tees 2" - 60" CLD 23 PEC
Ductile Iron PO x PO 11.25° Bends 2" - 60" CLD 23 ASPH
Ductile Iron PO x PO 11.25° Bends 2" - 60" CLD 23 PEC
Ductile Iron PO x PO 22.5° Bends 2" - 60" CLD 23 PEC
Ductile Iron PO x PO 22.5° Bends 2" - 60" CLD 23 ASPH
Ductile Iron PO x PO 45° Bends 2" - 60" CLD 23 ASPH
Ductile Iron PO x PO 45° Bends 2" - 60" CLD 23 PEC
Ductile Iron PO x PO 90° Bends 2" - 60" CLD 23 ASPH
Ductile Iron PO x PO 90° Bends 2" - 60" CLD 23 PEC
Ductile Iron PO x PO Offsets 2" - 60" CLD 23 PEC
Ductile Iron PO x PO Offsets 2" - 60" CLD 23 ASPH
Ductile Iron PO x PO Tees 2" - 60" CLD 23 PEC
Ductile Iron PO x PO Tees 2" - 60" CLD 23 ASPH
Ductile Iron PO x SEB Reducers 2" - 60" CLD 23 ASPH
Ductile Iron PO x SEB Reducers 2" - 60" CLD 23 PEC
Ductile Iron PO x Swivel Hydrant Tees 2" - 60" CLD 23 PEC
Ductile Iron PO x Swivel Hydrant Tees 2" - 60" CLD 23 ASPH
Ductile Iron PO x Tapped Tees 2" - 60" CLD 23 ASPH
Ductile Iron PO x Tapped Tees 2" - 60" CLD 23 PEC
Ductile Iron Sleeves 2" - 60" CLD 23 PEC
Ductile Iron Sleeves 2" - 60" CLD 23 ASPH
Ductile Iron Solid & Tapped Caps 2" - 60" CLD 23 ASPH
Ductile Iron Solid & Tapped Caps 2" - 60" CLD 23 PEC
Ductile Iron Solid & Tapped Plugs 2" - 60" CLD 23 ASPH
Ductile Iron Solid & Tapped Plugs 2" - 60" CLD 23 PEC
Ductile Iron Straight Flange x Flare 2" - 60" CLD 23 ASPH
Ductile Iron Straight Flange x Flare 2" - 60" CLD 23 PEC
Ductile Iron Swivel x Solid Hydrant Adapters w/ Swivel Gland 2" - 60" CLD 23 PEC
Ductile Iron Swivel x Solid Hydrant Adapters w/ Swivel Gland 2" - 60" CLD 23 ASPH
Ductile Iron Swivel x Swivel Hydrant Adapters with Two-Swivel Glands 2" - 60" CLD 23 ASPH
Ductile Iron Swivel x Swivel Hydrant Adapters with Two-Swivel Glands 2" - 60" CLD 23 PEC
Ductile Iron Swivel x Swivel Hydrant Ell with Two-Swivel Glands 2" - 60" CLD 23 ASPH
Ductile Iron Swivel x Swivel Hydrant Ell with Two-Swivel Glands 2" - 60" CLD 23 PEC

[1] Certification does not include gaskets.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Number of matching Manufacturers is 1
Number of matching Products is 182
Processing time was 0 seconds