NSF Product and Service Listings

These NSF Official Listings are current as of Saturday, July 12, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0034106&Standard=061&



NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.


 
Al Wasail Industrial Company 
King Abdulaziz Street
P.O. Box 124 
Buraydah 51411 
Saudi Arabia 
966 6 3816658
Visit this company's website


Facility : Buraydah, Saudi Arabia

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[1]
BUTT WELDING INJECTED STEP REDUCER PN16 SDR11 315 mm - 630 mm D. HOT PE
BUTT WELDING INJECTED STUB END (SHORT) PN16 SD11 355 mm - 630 mm D. HOT PE
BUTT WELDING INJECTED TEE REDUCER PN16 SDR11 63x32 - 250x160 mm D. HOT PE
BUTT WELDING FABRICATED CROSS TEE PN16 SDR11 110 - 250 mm D. HOT PE
BUTT WELDING FABRICATED ECCENTRIC REDUCER PN16 SDR11 90x63 - 315x250 mm D. HOT PE
BUTT WELDING FABRICATED ELBOW 45 DEG. PN16 SDR11 50 - 1200 mm D. HOT PE
BUTT WELDING FABRICATED ELBOW 45 DEG. PN20 SDR9 50 - 1200 mm D. HOT PE
BUTT WELDING FABRICATED ELBOW 90 DEG. PN16 SDR11 110 - 1200 mm D. HOT PE
BUTT WELDING FABRICATED ELBOW 90 DEG. PN20 SDR9 110 - 1200 mm D. HOT PE
BUTT WELDING FABRICATED EQUAL TEE PN16 SDR11 110 - 1200 mm D. HOT PE
BUTT WELDING FABRICATED REDUCER PN16 SDR11 355x90 - 800x710 mm D. HOT PE
BUTT WELDING FABRICATED REDUCER PN20 SDR9 110x63 - 800x710 mm D. HOT PE
BUTT WELDING FABRICATED STUB END (SHORT) PN16 SDR11 355 - 1000 mm D. HOT PE
BUTT WELDING FABRICATED TEE REDUCER PN16 SDR11 110x63 - 800x710 mm D. HOT PE
BUTT WELDING FABRICATED TEE REDUCER PN20 SDR9 110x63 - 800x710 mm D. HOT PE
BUTT WELDING INJECTED ELBOW 90 degrees[2] 20 mm - 315 mm D. HOT HDPE
BUTT WELDING INJECTED END CAP PN16 SDR11 20 mm - 400 mm D. HOT PE
BUTT WELDING INJECTED EQUAL TEE[2] 20 mm - 315 mm D. HOT HDPE
BUTT WELDING INJECTED REDUCER[3] 90x63mm - 315x250 mm D. HOT HDPE
BUTT WELDING INJECTED STUB END (LONG) PN16 SDR11 50 mm - 315 mm D. HOT PE
BUTT WELDING INJECTED STUB END (LONG) PN20 SDR9 50 mm - 315 mm D. HOT PE
ELECTRO FUSION COUPLER 20 mm - 200 mm D. HOT PE
ELECTRO FUSION ELBOW 90 20 mm - 200 mm D. HOT PE
ELECTRO FUSION EQUAL TEE 20 mm - 200 mm D. HOT PE
ELECTRO FUSION REDUCER 160 x 110 mm D. HOT PE
IPS FLANGE ADAPTOR[4] 2" - 12" D. HOT HDPE

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[2] Certified for the following configurations: PN16, SDR11, and 20 mm - 315 mm.
[3] Certified for the following configurations: PN16, SDR11, and 90 x 63 mm - 315 x 250 mm.
[4] The following sizes/models are certified:
    2"
    PN10/SDR17
    PN16/SDR11
    PN20/SDR9
    PN25/SDR7
    3"
    PN10/SDR17
    PN16/SDR11
    PN20/SDR9
    PN25/SDR7
    4"
    PN10/SDR17
    PN16/SDR11
    PN20/SDR9
    PN25/SDR7
    6"
    PN10/SDR17
    PN16/SDR11
    PN20/SDR9
    PN25/SDR7
    8"
    PN10/SDR17
    PN16/SDR11
    PN20/SDR9
    PN25/SDR7
    10"
    PN10/SDR17
    PN16/SDR11
    PN20/SDR9
    PN25/SDR7
    12"
    PN10/SDR17
    PN16/SDR11
    PN20/SDR9
    PN25/SDR7

Pipe[1]
Al-Wasail PW HDPE Pipes 20 mm - 1200 mm D. HOT HDPE

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.


Number of matching Manufacturers is 1
Number of matching Products is 27
Processing time was 0 seconds