NSF Product and Service Listings

These NSF Official Listings are current as of Saturday, December 13, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0042972&Standard=061&


NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.

 
Chang Horing Rubber Co., Ltd. 
No. 38, Lu-Gong South 3 Road
Lu-Kang Town, Changhua Hsien 505 
Taiwan 
886 4 781 0868
Visit this company's website


Facility : Changhua Hsien, Taiwan

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials [G]
EP010080P(KAWN) [1] [2] C. HOT EPDM
EP011060P(KAWN) [1] [2] C. HOT EPDM
EP011470P(KAWN) [1] [2] C. HOT EPDM
EP01873WRC [1] [2] C. HOT EPDM
EP01961PWRC [1] [2] C. HOT EPDM
EP02971PWRC [1] [2] C. HOT EPDM
EP05280PWRC [1] [2] C. HOT EPDM
NB012260P(KAWN) [1] [2] C. HOT NBR
NB012370P(KAWN) [1] [2] C. HOT NBR
NB013580P(KAWN) [1] [2] C. HOT NBR
NB03973PWRC [1] [2] C. HOT NBR
NB07973WRC [1] [3] C. HOT NBR 

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[2] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 square inches/L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.9 square inches/L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

O-Rings [G]
EP010080P(KAWN) [1] [2] C. HOT EPDM
EP011060P(KAWN) [1] [2] C. HOT EPDM
EP011470P(KAWN) [1] [2] C. HOT EPDM
EP01873WRC [1] [2] C. HOT EPDM
EP01961PWRC [1] [2] C. HOT EPDM
EP02971PWRC [1] [2] C. HOT EPDM
EP05280PWRC [1] [2] C. HOT EPDM
NB012260P(KAWN) [1] [2] C. HOT NBR
NB012370P(KAWN) [1] [2] C. HOT NBR
NB013580P(KAWN) [1] [2] C. HOT NBR
NB03973PWRC [1] [2] C. HOT NBR
NB07973WRC [1] [3] C. HOT NBR 

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[2] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 square inches/L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.9 square inches/L.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Number of matching Manufacturers is 1
Number of matching Products is 24
Processing time was 0 seconds