NSF Product and Service Listings
These NSF Official Listings are current as of Monday, September 15, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0043375&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
| Protec Arisawa Europe S.A. | |
| Aritz Bidea 67 | |
| 48100 Mungia | |
| Spain | |
| 34 9467 40312 | |
| Visit this company's website |
Facility : Mungia, Spain
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Filtration Devices/Components[1] [2] [3] [4] |
||||
| 1HFF608D3-20 | 8" | D. HOT | MLTPL | |
| BPV-16-C-D-E | 16" | D. HOT | MLTPL | |
| BPV-4-A-B-E | 4" | D. HOT | MLTPL | |
| BPV-8-C-D-E | 8" | D. HOT | MLTPL | |
| BPV-8-C-MCP-I | 8" | D. HOT | MLTPL | |
| BPV-C-D-E-K | 11" | D. HOT | MLTPL | |
| BPV-HU10255MI | 11" | D. HOT | MLTPL | |
| PA-8-C-D-K | 8" | D. HOT | MLTPL | |
| PRO 9-C-D-E-K | 9" | D. HOT | MLTPL | |
| PRO-11-C-D-E | 11" | D. HOT | MLTPL | |
| PRO-4-A-B-E | 4" | D. HOT | MLTPL | |
| PRO-6-C-D-E | 6" | D. HOT | MLTPL | |
| PRO-8-C-D-E-K | 8" | D. HOT | MLTPL | |
| PRO-8-C-MCP-I | 8" | D. HOT | MLTPL | |
| PRO-HU10255MI | 11" | D. HOT | MLTPL | |
| PRO-X-8-C-D-E-K | 8" | D. HOT | MLTPL | |
| PRO-X-8-D-TYPE-E | 8" | D. HOT | MLTPL | |
| Pall Xunc | 8" | D. HOT | MLTPL | |
| Ultipleat PA8040m | 8" | D. HOT | MLTPL | |
| Ultipleat PA8040s | 8" | D. HOT | MLTPL | |
| Ultipleat PA8060m | 8" | D. HOT | MLTPL | |
| Ultipleat PA8060s | 8" | D. HOT | MLTPL | |
| WAT-8-C-D-E | 8" | D. HOT | MLTPL | |
[1] All PRO and BPV series models can have a suffix of a -1 up through a -8 including -1.5
and -7.5. All PA series models can have a suffix of 8 and 184, indicating the diameter
of in inches and millimeters respectively.
The following nomenclature is used based on model type, where the indicators equal the
following:
A - From 150 to 2000
B - EP/SP
C - From 50 to 2000
D - EP/SP/MSP/MMSP
E - 1/1.5/2/3/4/5/6/7/7.5/8/1E/1S/"Blank"
K - 20/40/53/60/62/80/"Blank"
I - 3x2/3x3/4x4
X - UF/NF/CRF
[2] Models BPV-4-A-B-E, PRO-6-C-D-E, PRO-X-8-C-D-E-K, and PA-8-C-D-K are Certified for a
minimum daily flow of 370,000 L/day. All other models certified for a minimum permeate
flow of 327,000 L/day.
[3] The Listed size is the nominal housing diameter.
[4] Only products bearing the NSF Mark are NSF Certified.
|
||||
Number of matching Manufacturers is 1
Number of matching Products is 23
Processing time was 0 seconds
