NSF Product and Service Listings

These NSF Official Listings are current as of Friday, January 21, 2022 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0049497&Standard=061&



NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings.


 
Prabhat Elastomers Pvt. Ltd. 
'Prabhat Bhavan', 96, LBS MARG
Vikhroli (W), Mumbai 400 083 
India 
877-503-8965 
91 223 2946102
Visit this company's website


Facility : Gujarat, India

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials
AB 09 >= 2" CLD 23 SBR
AED 50 T5 >= 4" CLD 23 EPDM
AED 67 T5 >= 4" CLD 23 EPDM
AED 85 T5 >= 4" CLD 23 EPDM
B 304 >= 2" CLD 23 SBR
BC 309 T 15 >= 2" CLD 23 SBR
BC 310 >= 2" CLD 23 SBR
BW 5910 >= 4" CLD 23 EPDM
CS3 >= 1 1/2" CLD 23 SBR
CS4 >= 2" CLD 23 SBR
D 555 >= 2" CLD 23 EPDM
D-719 >= 1" C. HOT EPDM
IEH 78 >= 4" CLD 23 EPDM
KH 1 >= 2" CLD 23 SBR
KH 2 >= 2" CLD 23 SBR
KH 4 >= 2" CLD 23 SBR
KH06 >= 2" CLD 23 SBR
KS1 >= 2" CLD 23 SBR
KS1 T7 >= 2" CLD 23 SBR
KS2 >= 2" CLD 23 SBR
KS2 T7 >= 2" CLD 23 SBR
S4 >= 1 1/2" CLD 23 SBR
S5 >= 1 1/2" CLD 23 SBR
S6 >= 1 1/2" CLD 23 SBR
SE1 >= 2" CLD 23 EPDM
UB 70E >= 1" CLD 23 EPDM
UB 75 E >= 2" C. HOT EPDM
ULE 5 >= 4" CLD 23 EPDM

O-Rings, Gasket/Sealing Materials
NMT 01 [1] C. HOT NBR

[1] Certified for a maximum surface area to volume ratio of 2.0 square inches/L.


Number of matching Manufacturers is 1
Number of matching Products is 29
Processing time was 0 seconds