NSF Product and Service Listings

These NSF Official Listings are current as of Sunday, January 23, 2022 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0052258&Standard=061&



NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings.


 
Stankovsky Handels GmbH 
Flachenauergutstrasse 8
A-4020 Linz 
Austria 
43 7 322 21 877


Facility : # 1 Switzerland

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Adhesives
Staloc 2S43 >= 1/2" C. HOT ADH
Staloc 2S45 >= 1/2" C. HOT ADH
Staloc 2S62 >= 1/2" C. HOT ADH
Staloc 2S70 >= 1/2" C. HOT ADH
Staloc 2S71 >= 1/2" C. HOT ADH
Staloc 2S77 >= 1/2" C. HOT ADH
Staloc 4S01 >= 1/2" CLD 23 ADH
Staloc 4S06 >= 1/2" CLD 23 ADH
Staloc 4S14 >= 1/2" CLD 23 ADH
Staloc 4S24 >= 1/2" CLD 23 ADH
Staloc 5S10[1] >= 1/2" C. HOT ADH
Staloc 5S65 >= 1/2" C. HOT ADH
Staloc 5S74 >= 1/2" C. HOT ADH
Staloc 5S77 >= 1/2" C. HOT ADH
Staloc 6S03 >= 1/2" C. HOT ADH
Staloc 6S38 >= 1/2" C. HOT ADH
Staloc 6S48 >= 1/2" C. HOT ADH

[1] Certification is based on a minimum cure of 72 hours at 75ºF.

Sealants
Staloc 5S73 >= 1/2" C. HOT SLT

Thread Compounds
Staloc 2S42 >= 1/2" C. HOT TC
Staloc 2S62 >= 1/2" C. HOT TC
Staloc 2S70 >= 1/2" C. HOT TC
Staloc 2S71 >= 1/2" C. HOT TC
Staloc 2S77 >= 1/2" C. HOT TC
Staloc 5S72 >= 1/2" C. HOT TC


Number of matching Manufacturers is 1
Number of matching Products is 24
Processing time was 1 seconds