NSF Product and Service Listings

These NSF Official Listings are current as of Monday, December 2, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0055870&Standard=061&



NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.


 
Global Filter, LLC. 
1201 Continental Pl NE
Cedar Rapids, IA 52402 
United States 
877.603.1003 
319-743-0110
Visit this company's website


Facility : Cedar Rapids, IA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components
GBFE4[1] [2] 5" x 24" CLD 23 MLTPL
GBFV8[1] [3] 8" x 25" - 35" CLD 23 MLTPL
GFHD1[1] [4] 4" x 8" - 34" CLD 23 MLTPL
GMBE[1] [5] 26" - 40" x 72" CLD 23 MLTPL
GMBV[1] [6] 26" - 40" x 72" CLD 23 MLTPL
GTCH[1] [7] 8" - 18" x 28" - 40" CLD 23 MLTPL
GTCHB[1] [8] 8" - 18" x 28" - 40" CLD 23 MLTPL
Municlear-MB[9] [10] CLD 23 MLTPL
Municlear-SW[9] [10] CLD 23 MLTPL
PG-Series Filter Cartridges[11] [12] CLD 23 MLTPL
PP-Series Filter Cartridges[11] [12] CLD 23 MLTPL
PPE-Series Filter Cartridges[11] [12] CLD 23 MLTPL

[1] Certified for point-of-entry (POE) and municipal end uses.
[2] GBFE4-[basket size]-[port size]-[port
    style]-[outlet]-[material]-[P-rating]-[finish]-[MC]
    [basket size] - 12 (Size #4)
    [port size]   - 1N (1"FNPT)
    [outlet]      - 3 (bottom & opposite side outlet)[material] - 4 (304SS), 6 (316SS)
    [P-rating]    - 30 (300psi)
    [finish]      - GB (glass bead)
    [MC]          - NSF-61 certified
[3] GBFV8-[basket size]-[port size]-[port
    style]-[outlet]-[material]-[P-rating]-[finish]-[ASME status]-[MC]
    [basket size] - 15 (Size #1), 30 (Size #2), 230 (twin Size #2)
    [port size]   - 1 through 8 (1" through 8")
    [port style]  - N (NPT), F (flange), T (sanitary ferrule)
    [outlet]      - 1 (bottom outlet), 2 (opposite side outlet), 3 (bottom & opposite side 
                    outlet), 5 (same side outlet)
    [material]    - 4 (304SS), 6 (316SS)
    [P-rating]    - 15 (150psi)
    [finish]      - GB (glass bead), EP (electropolished)
    [ASME status] - U (ASME Code), blank (non-code)
    [MC]          - NSF-61 certified
[4] GFHD1-[length]-[port size]-[adapter type]-[material]-[P-rating]-[MC]
    [length]       - 5, 10, 20, 30 (5", 10", 20", 30")
    [port size]    - 75N (3/4"NPT), 1N (1"NPT), 75B (3/4"BSPP), 1B (1" BSPP)
    [adapter type] - D (DOE), 2 (222), 6 (226)
    [material]     - 4 (304), 6 (316)
    [P-rating]     - 30 (300psi)
    [MC]           - NSF-61 certified
[5] GMBE-[basket quantity]-[basket size]-[port size &
    style]-[material]-[P-rating]-[finish]-[MC]
    [basket quantity]   - 4, 6, 8, or 12
    [basket size]       - 30 (Size #2)
    [port size & style] - 4, 6, 8, or 10 (4", 6", 8", or 10" flange)
    [material]          - 4 (304SS), 6 (316SS)
    [P-rating]          - 15 (150psi)
    [finish]            - GB (glass bead)
    [MC]                - NSF-61 certified
[6] GMBV-[basket quantity]-[basket size]-[port size &
    style]-[material]-[P-rating]-[finish]-[ASME status]-[MC]
    [basket quantity]   - 4, 6, 8, or 12
    [basket size]       - 30 (Size #2)
    [port size & style] - 4, 6, 8, or 10 (4", 6", 8", or 10" flange)
    [material]          - 4 (304SS), 6 (316SS)
    [P-rating]          - 15 (150psi)
    [finish]            - GB (glass bead)
    [ASME status]       - U (ASME Code), blank (non-code)
    [MC]                - NSF-61 certified
[7] GTCH-[qty of cartridges]-[length]-[port
    size]-[outlet]-[material]-[P-rating]-[finish]-[ASME status]-[MC]
    [quantity of cartridges] - 3, 5, 7, 12, 21
    [length]                 - 1 (10"), 2 (20"), 3 (30"), 4 (40"
    [port size]              - 1 through 8 (1" through 8")
    [port style]             - N (NPT), F (flange), T (sanitary ferrule)
    [outlet]                 - 1 (bottom outlet), 2 (opposite outlet)
    [material]               - 4 (304SS), 6 (316SS)
    [P-rating]               - 15 (150psi)
    [finish]                 - GB (glass bead), EP (electropolished)
    [ASME status]            - U (ASME Code), blank (non-code)
    [MC]                     - NSF-61 certified
[8] GTCHB-[qty of cartridges]-[length]-[port size]-[outlet
    location]-[material]-[P-rating]-[finish]-[MC]
    [quantity of cartridges] - 3, 4, 5, 7, 12, 22
    [length]                 - 1 (10"), 2 (20"), 3 (30"), 4 (40")
    [port size]              - 1 through 8 (1" through 8")
    [port style]             - M (NPT), F (flange), T (sanitary ferrule)
    [outlet location]        - 1 (bottom outlet), 2 (opposite outlet)
    [material]               - 4 (304SS), 6 (316SS)
    [P-rating]               - 15 (150psi)
    [finish]                 - PC (polycoat)
    [MC]                     - NSF-61 certified
[9] Certified for the following part numbers: 
    
    Municlear MB 
    GWTB[BB][Micron]A[Length][End Cap Code][O-ring][Bond][Core][Suffix]
    GCTB[Micron]A[Length][End Cap Code][O-ring][Bond][Core]
    GATB[Micron]A[Length][End Cap Code][O-ring][Bond][Core]
    [BB]   - Blank (2.5" OD), BB (4" OD)
    [Bond] - Blank (adhesive bond), TB (thermally bonded)
    [Core] - Blank (no core), PC (polypropylene core)
    [Suffix] - Blank (standard), MC (MC trade name)
    
    Municlear SW 
    GP[Micron]A[Length]P[End Caps][O-ring]-MC
     
    [Micron]  - 1, 3, 5, 10, 25, 50 
    [Length]  - 9.75" - 60" 
    [End Cap] - Blank (None; DOE, No gaskets), 3 (222 w/fin), 4 (222 w/flat cap), 5 (222
                w/spring), 6 (226 w/flat cap), 7 (226 w/fin), 8 (226 w/spring), 9 (SOE
                w/spring), 10 (DOE w/PP Core extender), 13 (SOE w/ PP Core Ext/Spring) 
    [O-ring]  - B (Buna N), E (EPDM), S (Silicone), Blank (None)
[10] Certified for a minimum daily flow of 4,320 gallons per 10" equivalent.
[11] Certified for the following part numbers:
     
     [Series][Micron][Efficiency][Length]C[End Cap Code][O-ring]
     [Series] - PP (2.7"OD); PPE (2.5"OD); PG (2.7"OD with reduced area) 
     [Micron] - 0.1 to 40
     [Efficiency] - A (absolute), N (nominal)
     [Length]  - 9.75" to 40"
     [Options] - I (stainless steel inserts), SS (stainless steel core), R (18 mega-ohm 
                 rinse), CS (stainless steel spring)
     [End Cap] - 2 (DOE with gaskets), 3 (222 w/fin), 4 (222 w/flat cap), 5 (222 w/spring), 6
     
                 (226 w/flat cap), 7 (226 w/fin), 8 (226 w/spring), 16 (213 with flat cap), 
                 28 (222 with tabs)
     [O-ring] - B (Buna N), E (EPDM), S (silicone)
[12] Certified for a minimum daily flow of 600 gallons per day.  Certified for use in
     municipal water treatment facilities only.

Microfiltration Devices
EHF3-Series Filter Cartridges[13] [14] CLD 23 MLTPL
HF-Series Filter Cartridges[13] [14] CLD 23 MLTPL
HF3-Series Filter Cartridges[13] [14] CLD 23 MLTPL
HFB-Series Filter Cartridges[15] [16] CLD 23 MLTPL

[13] Model number format:
     [series] [media] [micron rating] [efficiency] [length] [top type] [hardward] [oring]
     [series] - "HF", "HF3", "EHF3"
     [media] - PP (polypropylene)
     [micron rating] - 0.2 to 100um
     [efficiency] - A (absolute), N (nominal)
     [length] - 10" to 60", "1" (size #1), "2" (size #2)
     [top type] - none, or "A", "B", "C", "D", "E", or "S"
     [hardware] - none, or "P" (polypropylene)
     [Oring] - B (buna), E (EPDM), S (silicone)
     Certified for a minimum daily flow of 2,000 gallons
[14] HF-Series Filter Cartridges- Diameter: 6" Length : 20" to 80"
     EHF3-Series Filter Cartridges- Diameter: 6" Length :20" to 60"
     HF3-Series Filter Cartridges- Diameter: 6" Length : 20" to 60"
[15] Model number format:
     [series] [media] [micron rating] [efficiency] [length] [top type] [hardward] [oring]	
     [series] - "HFB"
     [media] - PP (polypropylene)		
     [micron rating] - 0.2 to 100um		
     [efficiency] - A (absolute), N (nominal)	
     [length] - 10" to 60", "1" (size #1), "2" (size #2)	
     [top type] - none, or "A", "B", "C", "D", "E", or "S"	
     [hardware] - none, or "P" (polypropylene)		
     [Oring] - B (buna), E (EPDM), S (silicone)	
     Certified for a minimum daily flow of 2,000 gallons
[16] HFB-Series Filter Cartridges - Diameter:6" Length: 12" to 24".

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are certified. 

Number of matching Manufacturers is 1
Number of matching Products is 16
Processing time was 0 seconds