NSF Product and Service Listings

These NSF Official Listings are current as of Sunday, October 26, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0066078&Standard=061&


NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.

 
Multi W Systems, Inc. 
2615 Strozier Avenue
El Monte, CA 91733 
United States 
888-668-9345 
626-358-7171


Facility : # 1 USA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pumps[1] [G]
JE1-120A-1HP 1 1/4"x1"-1 1/2"x1" CLD 23 MLTPL
JE1-120B-1 1/2HP 1 1/4"x1"-1 1/2"x1" CLD 23 MLTPL
JE1-120C-3HP 1 1/4"x1"-1 1/2"x1" CLD 23 MLTPL
JE1-200A-1 1/2HP 1 1/4"x1"-1 1/2"x1" CLD 23 MLTPL
JE1-200B-3HP 1 1/4"x1"-1 1/2"x1" CLD 23 MLTPL
JE1-200C-3HP 1 1/4"x1"-1 1/2"x1" CLD 23 MLTPL
JE1-70A-3/4HP 1 1/4"x1"-1 1/2"x1" CLD 23 MLTPL
JE1-70B-1 1/2HP 1 1/4"x1"-1 1/2"x1" CLD 23 MLTPL
JE1-70C-2HP 1 1/4"x1"-1 1/2"x1" CLD 23 MLTPL
JE2-A-125-3HP 2"x1 1/4"-3"x2 1/2" CLD 23 MLTPL
JE2-A-160A-5HP 2"x1 1/4"-3"x2 1/2" CLD 23 MLTPL
JE2-A-160B-5HP 2"x1 1/4"-3"x2 1/2" CLD 23 MLTPL
JE2-A-200-1-10HP 2"x1 1/4"-3"x2 1/2" CLD 23 MLTPL
JE2-A-200-7 1/2HP 2"x1 1/4"-3"x2 1/2" CLD 23 MLTPL
JE2-B-125A-5HP 2"x1 1/4"-3"x2 1/2" CLD 23 MLTPL
JE2-B-125B-5HP 2"x1 1/4"-3"x2 1/2" CLD 23 MLTPL
JE2-B-160-1-10HP 2"x1 1/4"-3"x2 1/2" CLD 23 MLTPL
JE2-B-160-7 1/2HP 2"x1 1/4"-3"x2 1/2" CLD 23 MLTPL
JE2-B-200A-15HP 2"x1 1/4"-3"x2 1/2" CLD 23 MLTPL
JE2-B-200B-15HP 2"x1 1/4"-3"x2 1/2" CLD 23 MLTPL
JE2-C-125-1-10HP 2"x1 1/4"-3"x2 1/2" CLD 23 MLTPL
JE2-C-125-7 1/2HP 2"x1 1/4"-3"x2 1/2" CLD 23 MLTPL
JE2-C-160-1-15HP 2"x1 1/4"-3"x2 1/2" CLD 23 MLTPL
JE2-C-160-10HP 2"x1 1/4"-3"x2 1/2" CLD 23 MLTPL
JE2-Z-125-10 2"x1 1/4"-3"x2 1/2" CLD 23 MLTPL
JE2-Z-125-7.5 2"x1 1/4"-3"x2 1/2" CLD 23 MLTPL
JE2-Z-160-10 2"x1 1/4"-3"x2 1/2" CLD 23 MLTPL
JE2-Z-160-15 2"x1 1/4"-3"x2 1/2" CLD 23 MLTPL
JE2-Z-160-20 2"x1 1/4"-3"x2 1/2" CLD 23 MLTPL
JE2-Z-160-25 2"x1 1/4"-3"x2 1/2" CLD 23 MLTPL
JE2-Z-200-20 2"x1 1/4"-3"x2 1/2" CLD 23 MLTPL
JE2-Z-200-25 2"x1 1/4"-3"x2 1/2" CLD 23 MLTPL
JE2-Z-200-30 2"x1 1/4"-3"x2 1/2" CLD 23 MLTPL
JE24-A-200-1-1 1/2HP 2"x1 1/4"-3"x2 1/2" CLD 23 MLTPL
JE24-A-200-1HP 2"x1 1/4"-3"x2 1/2" CLD 23 MLTPL
JE24-B-160-1HP 2"x1 1/4"-3"x2 1/2" CLD 23 MLTPL
JE24-B-200A-1 1/2HP 2"x1 1/4"-3"x2 1/2" CLD 23 MLTPL
JE24-B-200B-2HP 2"x1 1/4"-3"x2 1/2" CLD 23 MLTPL
JE24-C-160-1 1/2HP 2"x1 1/4"-3"x2 1/2" CLD 23 MLTPL
JE24-C-160-1-2HP 2"x1 1/4"-3"x2 1/2" CLD 23 MLTPL
JE3-1506-1 1/2HP 1 1/4" x 1" CLD 23 MLTPL
JE3-806-3/4HP 1 1/4" x 1" CLD 23 MLTPL
JE4-A120/306-3HP 1 1/4"x1"-1 1/2"x1" CLD 23 MLTPL
JE4-A200/506-5HP 1 1/4"x1"-1 1/2"x1" CLD 23 MLTPL
JE4-A70/206-2HP 1 1/4"x1"-1 1/2"x1" CLD 23 MLTPL
JE4-A70/306-3HP 1 1/4"x1"-1 1/2"x1" CLD 23 MLTPL
JVMS(A)(B)(C)(D)(E)1-(W)(F)(X)(Y)(Z)[2] 1 1/4" x 1 1/4" CLD 23 MLTPL
JVMS(A)(B)(C)(D)(E)10-(W)(F)(X)(Y)(Z)[2] 2" x 2" CLD 23 MLTPL
JVMS(A)(B)(C)(D)(E)15-(W)(F)(X)(Y)(Z)[2] 2" x 2" CLD 23 MLTPL
JVMS(A)(B)(C)(D)(E)20-(W)(F)(X)(Y)(Z)[2] 2" x 2" CLD 23 MLTPL
JVMS(A)(B)(C)(D)(E)3-(W)(F)(X)(Y)(Z)[2] 1 1/4" x 1 1/4" CLD 23 MLTPL
JVMS(A)(B)(C)(D)(E)5-(W)(F)(X)(Y)(Z)[2] 1 1/4" x 1 1/4" CLD 23 MLTPL
JVMS(A)L(B)(C)(D)(E)1-(W)(F)(X)(Y)(Z)[2] 1 1/4" x 1 1/4" CLD 23 MLTPL
JVMS(A)L(B)(C)(D)(E)10-(W)(F)(X)(Y)(Z)[2] 2" x 2" CLD 23 MLTPL
JVMS(A)L(B)(C)(D)(E)15-(W)(F)(X)(Y)(Z)[2] 2" x 2" CLD 23 MLTPL
JVMS(A)L(B)(C)(D)(E)20-(W)(F)(X)(Y)(Z)[2] 2" x 2" CLD 23 MLTPL
JVMS(A)L(B)(C)(D)(E)3-(W)(F)(X)(Y)(Z)[2] 1 1/4" x 1 1/4" CLD 23 MLTPL
JVMS(A)L(B)(C)(D)(E)5-(W)(F)(X)(Y)(Z)[2] 1 1/4" x 1 1/4" CLD 23 MLTPL 

[1] Size is expressed as suction x discharge.
[2] A - Motor Bracket Type
    U - NEMA
    I - IEC (pm motor)
    C - IEC (induction motor)
    B - Motor Speed
    None - 2 Pole (300 rpm)
    F - 4 Pole (1800 rpm)
    C - Pump Configuration
    None - Vertical
    H - Horizontal
    D - Working Pressure
    None - Standard
    P - Uprated
    E - IEC Frame Size
    None - Standard frame
    A - Smaller frame
    B - Larger frame
    F - Piping Connection Type
    F - Round Flange
    N - Oval Flange
    L - Loose Round Flange
    V - Victaulic
    C - C
    W - Number of Impellers
    1 - 29
    X - Horsepower of Motor
    0050 - 1/2 hp
    0075 - 3/4 hp
    0100 - 1.0 hp
    0150 - 1.5 hp
    0200 - 2.0 hp
    0300 - 3.0 hp
    0500 - 5.0 hp
    0750 - 7.5 hp
    1000 - 10 hp
    1500 - 15 hp
    2000 - 20 hp
    2500 - 25 hp
    3000 - 30 hp
    4000 - 40 hp
    5000 - 50 hp
    Y - Motor Type
    D - Open Drip Proof (ODP)
    T - Totally Enclosed Fan Cooled (TEFC)
    Z - Motor Phase
    1 - Single Phase
    3 - Three Phase
    "A" in the model name indicates sub-component design modifications.
    Only the type "S" mechanical seal (Silicon Carbide/Carbon/FPM) is included in
    Certification.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : # 1 Italy

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pumps[G]
JVML 32 2 1/2" x 2 1/2" CLD 23 MLTPL
JVML 45 3" x 3" CLD 23 MLTPL
JVML 64 4" x 4" CLD 23 MLTPL
JVMU32-(W)F (X)(Y)(Z) S 2 1/2" x 2 1/2" CLD 23 MLTPL
JVMU45-(W)F (X)(Y)(Z) S 3" x 3" CLD 23 MLTPL
JVMU64-(W)F (X)(Y)(Z) S 4" x 4" CLD 23 MLTPL 

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.



Facility : # 2 Italy

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pumps[1] [G]
JVMS1(A)(B)(C)-(W)(F)(X)(Y)(Z) S[2] 1 1/4" x 1 1/4" CLD 23 MLTPL
JVMS10(A)(B)(C)-(W)(F)(X)(Y)(Z) S[2] 2" x 2" CLD 23 MLTPL
JVMS15(A)(B)(C)-(W)(F)(X)(Y)(Z) S[2] 2" x 2" CLD 23 MLTPL
JVMS20(A)(B)(C)-(W)(F)(X)(Y)(Z) S[2] 2" x 2" CLD 23 MLTPL
JVMS3(A)(B)(C)-(W)(F)(X)(Y)(Z) S[2] 1 1/4" x 1 1/4" CLD 23 MLTPL
JVMS5(A)(B)(C)-(W)(F)(X)(Y)(Z) S[2] 1 1/4" x 1 1/4" CLD 23 MLTPL
JVMSL1(A)(B)(C)-(W)(F)(X)(Y)(Z) S[2] 1 1/4" x 1 1/4" CLD 23 MLTPL
JVMSL10(A)(B)(C)-(W)(F)(X)(Y)(Z) S[2] 2" x 2" CLD 23 MLTPL
JVMSL15(A)(B)(C)-(W)(F)(X)(Y)(Z) S[2] 2" x 2" CLD 23 MLTPL
JVMSL20(A)(B)(C)-(W)(F)(X)(Y)(Z) S[2] 2" x 2" CLD 23 MLTPL
JVMSL3(A)(B)(C)-(W)(F)(X)(Y)(Z) S[2] 1 1/4" x 1 1/4" CLD 23 MLTPL
JVMSL5(A)(B)(C)-(W)(F)(X)(Y)(Z) S[2] 1 1/4" x 1 1/4" CLD 23 MLTPL 

[1] Size is expressed as suction end x discharge end.
[2] A - Motor Speed
        None - 2 Pole (300 rpm)
        F    - 4 Pole (1800 rpm)
    B - Pump Configuration
        None - Vertical
        H    - Horizontal
    C - Working Pressure
        None - Standard
        P    - Uprated 
    F - Piping Connection Type
        F - Round flange
        N - Oval flange
        L - Loose round flange
        V - Victaulic
        C - Clamp
    W - Number of Impellers
        1 - 29
    X - Horsepower of Motor
        0050 - 1/2 hp
        0075 - 3/4 hp
        0100 - 1.0 hp
        0150 - 1.5 hp
        0200 - 2.0 hp
        0300 - 3.0 hp
        0500 - 5.0 hp
        0750 - 7.5 hp
        1000 - 10 hp
        1500 - 15 hp
        2000 - 20 hp
        2500 - 25 hp
        3000 - 30 hp
        4000 - 40 hp
        5000 - 50 hp
    Y - Motor Type
        D - Open drip proof (ODP)
        T - Totally enclosed fan cooled (TEFC)
        Z - Motor phase
        1 - Single phase
        3 - Three phase
    
    "A" in the model name indicates sub-component design modifications.
    
    Only the type "S" mechanical seal (Silicon Carbide/Carbon/FPM) is included in
    Certification.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Number of matching Manufacturers is 1
Number of matching Products is 76
Processing time was 0 seconds