NSF Product and Service Listings

These NSF Official Listings are current as of Friday, December 26, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0077887&Standard=061&


NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.

 
SAUEREISEN 
160 Gamma Drive
Pittsburgh, PA 15238 
United States 
412-963-0303


Facility : # 1 USA

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Coatings - Fittings
ConoFlex 381.61[1] >= 2" CLD 23 PUR 

[1] Colors: Almond, Black, Gray
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 210
    Final Cure Time and Temperature: 72 hours at 75°F
    Special Comments: Mix ratio of Part A:Part B of 381.61 is 3:1 by volume.

Coatings - Pipe
ConoFlex 381.61[1] >= 8" CLD 23 PUR 

[1] Colors: Almond, Black, Gray
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 210
    Final Cure Time and Temperature: 72 hours at 75°F
    Special Comments: Mix ratio of Part A:Part B of 381.61 is 3:1 by volume.

Coatings - Tank
ConoFlex 381.61[1] >= 50 gal. CLD 23 PUR 

[1] Colors: Almond, Black, Gray
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 210
    Final Cure Time and Temperature: 72 hours at 75°F
    Special Comments: Mix ratio of Part A:Part B of 381.61 is 3:1 by volume.

Coatings - Valve
ConoFlex 381.61[1] >= 2" CLD 23 PUR 

[1] Colors: Almond, Black, Gray
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 210
    Final Cure Time and Temperature: 72 hours at 75°F
    Special Comments: Mix ratio of Part A:Part B of 381.61 is 3:1 by volume.

Number of matching Manufacturers is 1
Number of matching Products is 4
Processing time was 0 seconds