NSF Product and Service Listings

These NSF Official Listings are current as of Monday, January 17, 2022 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0096516&Standard=061&



NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings.


 
Qingdao Jindapeng Powder Technology Co., Ltd. 
Zhaojialing Park 586, Tongji Street
Jimo, Qingdao City 
Shandong 266228 
China 
86 532 82513968
Visit this company's website


Facility : Shandong, China

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Coatings - Fittings[1]
JDP18NEY >= 2" D. HOT PEC
JDP18NEY BLACK >= 2" D. HOT PEC
JDP19NEY BLUE >= 2" D. HOT PEC

[1] Number of coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 22 
    Final Cure Time and Temperature: 20 minutes at 180°C
    Special Comments: Preheat substrate to 190°C - 220°C

Coatings - Pipe[1]
JDP18NEY 2", 3", >= 8" D. HOT PEC
JDP18NEY BLACK 2", 3", >= 8" D. HOT PEC
JDP19NEY BLUE 2", 3", >= 8" D. HOT PEC

[1] Number of coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 22 
    Final Cure Time and Temperature: 20 minutes at 180°C
    Special Comments: Preheat substrate to 190°C - 220°C

Coatings - Valve[1]
JDP18NEY >= 2" D. HOT PEC
JDP18NEY BLACK >= 2" D. HOT PEC
JDP19NEY BLUE >= 2" D. HOT PEC

[1] Number of coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 22 
    Final Cure Time and Temperature: 20 minutes at 180°C
    Special Comments: Preheat substrate to 190°C - 220°C


Number of matching Manufacturers is 1
Number of matching Products is 9
Processing time was 0 seconds