NSF Product and Service Listings

These NSF Official Listings are current as of Wednesday, November 5, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0164216&Standard=061&


NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.

 
Accella Polyurethane Systems, LLC DBA Carlisle Polyurethane Systems, 
Carlisle Roof Foam and Coatings
2500 Adie Road 
Maryland Heights, MO 63043 
United States 
770-528-9556
Visit this company's website


Facility : Rancho Cucamonga, CA

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Grouts[1]
Substratum [2] CLD 23 PUR
Substratum 2F [2] CLD 23 PUR
Substratum 2R [2] CLD 23 PUR
Substratum 3F [2] CLD 23 PUR
Substratum 3R [2] CLD 23 PUR
Substratum 4F [2] CLD 23 PUR
Substratum 4R [2] CLD 23 PUR
Substratum 4S [2] CLD 23 PUR
Substratum 5R [2] CLD 23 PUR
Substratum 6R [2] CLD 23 PUR
Substratum Geopolymer [2] CLD 23 PUR 

[1] Certified for product with the following densities and reaction speeds:
    2 pounds per cubic foot (regular speed)
    2 pounds per cubic foot (fast speed)
    3 pounds per cubic foot (regular speed)
    3 pounds per cubic foot (fast speed)
    4 pounds per cubic foot (slow speed)
    4 pounds per cubic foot (regular speed)
    4 pounds per cubic foot (fast speed)
    5 pounds per cubic foot (regular speed)
    6 pounds per cubic foot (regular speed)
    
    Mix ratio is 1:1 (A:B) by volume or 8.1:6.9 (A:B) by weight.
    Minimum cure time is 60 minutes at ambient temperatures.
[2] Certified for a maximum surface area to volume ratio of 0.375 square inches per liter.



Facility : Maryland Heights, MO

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Coatings - Pump[1]
Bullet Liner DWS 61 >= 4" CLD 23 PUA
CPS DWS 61 >= 4" CLD 23 PUA
Prodeq FX 650 >= 4" CLD 23 PUA 

[1] Colors: Blue
    Number of Coats: 1-5
    Maximum Field Use Dry Thickness (in mils): 100 mils (50 per coat)
    Recoat Cure Time and Temperature: Immediate
    Final Cure Time/Temperature: 3 days at 72° F
    Special Comments: Mix ratio of Part A to Part B is 1:1 by volume. This material is
    applied using a high-pressure plural component pump.

Coatings - Tank[1]
Bullet Liner DWS 61 >= 1000 gal CLD 23 PUA
CPS DWS 61 >= 1000 gal CLD 23 PUA
Prodeq FX 650 >= 1000 gal CLD 23 PUA 

[1] Colors: Blue
    Number of Coats: 1-5
    Maximum Field Use Dry Thickness (in mils): 100 mils (50 per coat)
    Recoat Cure Time and Temperature: Immediate
    Final Cure Time/Temperature: 3 days at 72° F
    Special Comments: Mix ratio of Part A to Part B is 1:1 by volume. This material is
    applied using a high-pressure plural component pump.

Coatings - Valve[1]
Bullet Liner DWS 61 >= 4" CLD 23 PUA
CPS DWS 61 >= 4" CLD 23 PUA
Prodeq FX 650 >= 4" CLD 23 PUA 

[1] Colors: Blue
    Number of Coats: 1-5
    Maximum Field Use Dry Thickness (in mils): 100 mils (50 per coat)
    Recoat Cure Time and Temperature: Immediate
    Final Cure Time/Temperature: 3 days at 72° F
    Special Comments: Mix ratio of Part A to Part B is 1:1 by volume. This material is
    applied using a high-pressure plural component pump.



Facility : Chattanooga, TN

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Grouts[1]
Substratum [2] CLD 23 PUR
Substratum 2F [2] CLD 23 PUR
Substratum 2R [2] CLD 23 PUR
Substratum 3F [2] CLD 23 PUR
Substratum 3R [2] CLD 23 PUR
Substratum 4F [2] CLD 23 PUR
Substratum 4R [2] CLD 23 PUR
Substratum 4S [2] CLD 23 PUR
Substratum 5R [2] CLD 23 PUR
Substratum 6R [2] CLD 23 PUR
Substratum Geopolymer [2] CLD 23 PUR 

[1] Certified for product with the following densities and reaction speeds:
    2 pounds per cubic foot (regular speed)
    2 pounds per cubic foot (fast speed)
    3 pounds per cubic foot (regular speed)
    3 pounds per cubic foot (fast speed)
    4 pounds per cubic foot (slow speed)
    4 pounds per cubic foot (regular speed)
    4 pounds per cubic foot (fast speed)
    5 pounds per cubic foot (regular speed)
    6 pounds per cubic foot (regular speed)
    
    Mix ratio is 1:1 (A:B) by volume or 8.1:6.9 (A:B) by weight.
    Minimum cure time is 60 minutes at ambient temperatures.
[2] Certified for a maximum surface area to volume ratio of 0.375 square inches per liter.

Number of matching Manufacturers is 1
Number of matching Products is 31
Processing time was 0 seconds