NSF Product and Service Listings
These NSF Official Listings are current as of Saturday, July 12, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0178947&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
TA CHEN Stainless Pipe Company Limited | |
No. 122, Yi Lin Road, Jeng-The | |
Tainan 71752 | |
Taiwan | |
886 6 270 1756 | |
Visit this company's website |
Facility : Kaohsiung, Taiwan
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Fittings[G] |
||||
TA CHEN STAINLESS 304/304L 90° SHORT RADIUS ELBOW | 1" - 12" | C. HOT | SS | |
TA CHEN STAINLESS 304/304L CAP | 1/2" - 12" | C. HOT | SS | |
TA CHEN STAINLESS 304/304L CONCENTRIC REDUCER | 3/4"x3/8"-12"x10" | C. HOT | SS | |
TA CHEN STAINLESS 304/304L ECCENTRIC REDUCER | 3/4"x3/8"-12"x10" | C. HOT | SS | |
TA CHEN STAINLESS 304/304L LAP-JOINT STUB END TYPE C | 1/2" - 12" | C. HOT | SS | |
TA CHEN STAINLESS 304/304L LAP-JOINT STUB END/LONG TYPE A | 1/2" - 12" | C. HOT | SS | |
TA CHEN STAINLESS 304/304L LAP-JOINT STUB END/SHORT TYPE A | 1/2" - 12" | C. HOT | SS | |
TA CHEN STAINLESS 304/304L LAP-JOINT STUB END/SHORT TYPE B | 1/2" - 12" | C. HOT | SS | |
TA CHEN STAINLESS 304/304L REDUCING OUTLET TEE | 1/2"x1/4"-12"x10" | C. HOT | SS | |
TA CHEN STAINLESS 316/316L 90° SHORT RADIUS ELBOW | 1" - 12" | CLD 23 | SS | |
TA CHEN STAINLESS 316/316L CAP | 1/2" - 12" | CLD 23 | SS | |
TA CHEN STAINLESS 316/316L CONCENTRIC REDUCER | 3/4"x3/8" - 12"x10" | CLD 23 | SS | |
TA CHEN STAINLESS 316/316L ECCENTRIC REDUCER | 3/4"x3/8" - 12"x10" | CLD 23 | SS | |
TA CHEN STAINLESS 316/316L LAP-JOINT STUB END TYPE C | 1/2" - 12" | CLD 23 | SS | |
TA CHEN STAINLESS 316/316L LAP-JOINT STUB END/LONG TYPE A | 1/2" - 12" | CLD 23 | SS | |
TA CHEN STAINLESS 316/316L LAP-JOINT STUB END/SHORT TYPE A | 1/2" - 12" | CLD 23 | SS | |
TA CHEN STAINLESS 316/316L LAP-JOINT STUB END/SHORT TYPE B | 1/2" - 12" | CLD 23 | SS | |
TA CHEN STAINLESS 316/316L REDUCING OUTLET TEE | 1/2"x1/4" - 12"x10" | CLD 23 | SS | |
TA CHEN STAINLESS STEEL 316 WELDED PIPE | 1/8" - 12" | CLD 23 | SS | |
TA CHEN STAINLESS STEEL 316L WELDED PIPE | 1/8" - 12" | CLD 23 | SS | |
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.
Facility : Tainan, Taiwan
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Couplings[G] |
||||
Stainless steel SS304 Deep Well Coupling | 1" - 2" | D. HOT | SS | |
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||
Fittings[G] |
||||
45° ELBOW BANDED EQUAL | 1/8" - 4" | C. HOT | SS | |
90° ELBOW BANDED EQUAL | 1/8" - 4" | C. HOT | SS | |
COUPLING / SOCKET | 1/8" - 4" | C. HOT | SS | |
CROSS BANDED EQUAL | 1/8" - 4" | C. HOT | SS | |
HALF COUPLING / HALF SOCKET | 1/8" - 4" | C. HOT | SS | |
HEX BUSHING | 1/8" - 4" | C. HOT | SS | |
HEX CAP | 1/8" - 4" | C. HOT | SS | |
HEX HEAD PLUG | 1/8" - 4" | C. HOT | SS | |
HEX NIPPLE | 1/8" - 4" | C. HOT | SS | |
HEX NUT | 1/8" - 4" | C. HOT | SS | |
HOSE NIPPLE | 1/8" - 4" | C. HOT | SS | |
MSS SP-114 45° ELBOW BANDED EQUAL | 1/8" - 4" | C. HOT | SS | |
MSS SP-114 90° ELBOW BANDED EQUAL | 1/8" - 4" | C. HOT | SS | |
MSS SP-114 COUPLING / SOCKET | 1/8" - 4" | C. HOT | SS | |
MSS SP-114 CROSS BANDED EQUAL | 1/8" - 4" | C. HOT | SS | |
MSS SP-114 HALF COUPLING / HALF SOCKET | 1/8" - 4" | C. HOT | SS | |
MSS SP-114 HEX BUSHING | 1/8" - 4" | C. HOT | SS | |
MSS SP-114 HEX HEAD PLUG | 1/8" - 4" | C. HOT | SS | |
MSS SP-114 HEX NUT | 1/8" - 4" | C. HOT | SS | |
MSS SP-114 REDUCING COUPLING | 1/8" - 4" | C. HOT | SS | |
MSS SP-114 ROUND CAP | 1/8" - 4" | C. HOT | SS | |
MSS SP-114 SQUARE HEAD PLUG | 1/8" - 4" | C. HOT | SS | |
MSS SP-114 STREET ELBOW 90° BANDED | 1/8" - 4" | C. HOT | SS | |
MSS SP-114 TEE BANDED EQUAL(P9B) | 1/8" - 4" | C. HOT | SS | |
MSS SP-114 UNION | 1/8" - 4" | C. HOT | SS | |
REDUCING COUPLING | 1/8" - 4" | C. HOT | SS | |
REDUCING NIPPLE | 1/8" - 4" | C. HOT | SS | |
ROUND CAP | 1/8" - 4" | C. HOT | SS | |
SQUARE HEAD PLUG | 1/8" - 4" | C. HOT | SS | |
STREET ELBOW 90° BANDED | 1/8" - 4" | C. HOT | SS | |
TA CHEN STAINLESS 304/304L 45° LONG RADIUS ELBOW | 1/2" - 12" | D. HOT | SS | |
TA CHEN STAINLESS 304/304L 90° LONG RADIUS ELBOW | 1/2" - 12" | D. HOT | SS | |
TA CHEN STAINLESS 304/304L STRAIGHT TEE | 1/8" - 12" | D. HOT | SS | |
TA CHEN STAINLESS 316/316L 45° LONG RADIUS ELBOW | 1/2" - 12" | CLD 23 | SS | |
TA CHEN STAINLESS 316/316L 90° LONG RADIUS ELBOW | 1/2" - 12" | CLD 23 | SS | |
TA CHEN STAINLESS 316/316L STRAIGHT TEE | 1/8" - 12" | CLD 23 | SS | |
TA CHEN STAINLESS STEEL 304/304L PIPE NIPPLE | 1/8" - 4" | D. HOT | SS | |
TA CHEN STAINLESS STEEL 316/316L PIPE NIPPLE | 1/8" - 4" | CLD 23 | SS | |
TEE BANDED EQUAL | 1/8" - 4" | C. HOT | SS | |
UNION | 1/8" - 4" | C. HOT | SS | |
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||
Pipe[G] |
||||
TA CHEN STAINLESS STEEL 304 WELDED PIPE | 1/8" - 24" | D. HOT | SS | |
TA CHEN STAINLESS STEEL 304L WELDED PIPE | 1/8" - 24" | D. HOT | SS | |
TA CHEN STAINLESS STEEL 316 WELDED PIPE | 1/8" - 24" | CLD 23 | SS | |
TA CHEN STAINLESS STEEL 316L WELDED PIPE | 1/8" - 24" | CLD 23 | SS | |
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.
Number of matching Manufacturers is 1
Number of matching Products is 65
Processing time was 1 seconds