NSF Product and Service Listings
These NSF Official Listings are current as of Thursday, November 7, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0181607&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
Haycarb Plc | |
400, Deans Road | |
Colombo 10 | |
Sri Lanka | |
94 11 262 7441 | |
Visit this company's website |
Facility : North Sulawesi, Indonesia
Process Media
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Granular Activated Carbon[1] [2] [3] |
||||
2142 | 12 x 30 mesh | CLD 23 | GAC | |
2296 | [4] | CLD 23 | GAC | |
2297 | [4] | CLD 23 | GAC | |
2307 | 12 x 30 mesh | CLD 23 | GAC | |
2308 | 20 x 50 mesh | CLD 23 | GAC | |
2490 | 12 x 40 mesh | CLD 23 | GAC | |
3005 50x200 | 50 x 200 mesh | CLD 23 | GAC | |
3036 20x50 | 20 x 50 mesh | CLD 23 | GAC | |
3160 325XF | 325 x F mesh | CLD 23 | GAC | |
3164 325XF | 325 x F mesh | CLD 23 | GAC | |
7038 | [4] | CLD 23 | GAC | |
7085 | [4] | CLD 23 | GAC | |
7491 | 30 x 60 mesh | CLD 23 | GAC | |
7701 | 50 x 200 mesh | CLD 23 | GAC | |
7728 | [4] | CLD 23 | GAC | |
7729 | [4] | CLD 23 | GAC | |
7736 | 8 x 30 mesh | CLD 23 | GAC | |
AK5 XX | [4] | CLD 23 | GAC | |
AKO XX | [4] | CLD 23 | GAC | |
AT5 XX | [4] | CLD 23 | GAC | |
ATO XX | [4] | CLD 23 | GAC | |
DE5 XX | [4] | CLD 23 | GAC | |
DEO XX | [4] | CLD 23 | GAC | |
HR5 XX | [4] | CLD 23 | GAC | |
HRO XX | [4] | CLD 23 | GAC | |
HT5 XX | [4] | CLD 23 | GAC | |
HTO XX | [4] | CLD 23 | GAC | |
NV5 XX | [4] | CLD 23 | GAC | |
NVO XX | [4] | CLD 23 | GAC | |
OLC 12x30 | 12 x 30 mesh | CLD 23 | GAC | |
OLC 12x40 | 12 x 40 mesh | CLD 23 | GAC | |
OLC 816 | 8 x 16 mesh | CLD 23 | GAC | |
OLC 820 | 8 x 20 mesh | CLD 23 | GAC | |
OLC PLUS 12x30E | 12 x 30 mesh | CLD 23 | GAC | |
OLC Plus 20x50 | 20 x 50 mesh | CLD 23 | GAC | |
PH5 XX | [4] | CLD 23 | GAC | |
PHO XX | [4] | CLD 23 | GAC | |
RWA A | [4] | CLD 23 | GAC | |
RWA C | [4] | CLD 23 | GAC | |
RWA D | [4] | CLD 23 | GAC | |
RWA G | [4] | CLD 23 | GAC | |
RWA M | [4] | CLD 23 | GAC | |
RWA O | [4] | CLD 23 | GAC | |
RWA P | [4] | CLD 23 | GAC | |
RWA S | [4] | CLD 23 | GAC | |
RWA T | [4] | CLD 23 | GAC | |
RWA X | [4] | CLD 23 | GAC | |
SA5 XX | [4] | CLD 23 | GAC | |
SAO XX | [4] | CLD 23 | GAC | |
SD5 XX | [4] | CLD 23 | GAC | |
SDO XX | [4] | CLD 23 | GAC | |
SE5 XX | [4] | CLD 23 | GAC | |
SEO XX | [4] | CLD 23 | GAC | |
STO XX | [4] | CLD 23 | GAC | |
TN5 XX | [4] | CLD 23 | GAC | |
TNO XX | [4] | CLD 23 | GAC | |
YA5 XX | [4] | CLD 23 | GAC | |
YAO XX | [4] | CLD 23 | GAC | |
[1] The carbon source is coconut shell. [2] The trade designations may also include CF4 which indicates non-washed GAC. [3] Prefix "R" is used to identify the material (R - Renewable material source like coconut/palm shell). There will also be a four digit suffix to indicate the other parameters of the product (such as iodine number, particle size etc.) These codes are customer specific and generated at random. [4] Approved mesh sizes: Certified for any ASTM mesh combinations between: 3 x 6 - 100 x 2500. |
||||
Powdered Activated Carbon[1] [3] [5] |
||||
2296 | [6] | CLD 23 | PAC | |
2297 | [6] | CLD 23 | PAC | |
2518 | M325 mesh | CLD 23 | PAC | |
7038 | [6] | CLD 23 | PAC | |
7085 | [6] | CLD 23 | PAC | |
7156 | M325 mesh | CLD 23 | PAC | |
7725 | M325 mesh | CLD 23 | PAC | |
7728 | [6] | CLD 23 | PAC | |
7729 | [6] | CLD 23 | PAC | |
AK5 XX | [6] | CLD 23 | PAC | |
AKO XX | [6] | CLD 23 | PAC | |
AT5 XX | [6] | CLD 23 | PAC | |
ATO XX | [6] | CLD 23 | PAC | |
DE5 XX | [6] | CLD 23 | PAC | |
DEO XX | [6] | CLD 23 | PAC | |
HR5 XX | [6] | CLD 23 | PAC | |
HRO XX | [6] | CLD 23 | PAC | |
HT5 XX | [6] | CLD 23 | PAC | |
HTO XX | [6] | CLD 23 | PAC | |
NV5 XX | [6] | CLD 23 | PAC | |
NVO XX | [6] | CLD 23 | PAC | |
PH5 XX | [6] | CLD 23 | PAC | |
PHO XX | [6] | CLD 23 | PAC | |
RWA A | [6] | CLD 23 | PAC | |
RWA C | [6] | CLD 23 | PAC | |
RWA D | [6] | CLD 23 | PAC | |
RWA G | [6] | CLD 23 | PAC | |
RWA M | [6] | CLD 23 | PAC | |
RWA O | [6] | CLD 23 | PAC | |
RWA P | [6] | CLD 23 | PAC | |
RWA S | [6] | CLD 23 | PAC | |
RWA T | [6] | CLD 23 | PAC | |
RWA X | [6] | CLD 23 | PAC | |
SA5 XX | [6] | CLD 23 | PAC | |
SAO XX | [6] | CLD 23 | PAC | |
SD5 XX | [6] | CLD 23 | PAC | |
SDO XX | [6] | CLD 23 | PAC | |
SE5 XX | [6] | CLD 23 | PAC | |
SEO XX | [6] | CLD 23 | PAC | |
STO XX | [6] | CLD 23 | PAC | |
TN5 XX | [6] | CLD 23 | PAC | |
TNO XX | [6] | CLD 23 | PAC | |
WPC | M325 mesh | CLD 23 | PAC | |
YA5 XX | [6] | CLD 23 | PAC | |
YAO XX | [6] | CLD 23 | PAC | |
[1] The carbon source is coconut shell. [3] Prefix "R" is used to identify the material (R - Renewable material source like coconut/palm shell). There will also be a four digit suffix to indicate the other parameters of the product (such as iodine number, particle size etc.) These codes are customer specific and generated at random. [5] The trade designation may also include CF4 which indicates non-washed PAC. [6] The approved mesh sizes include: M100, M140, M170, M200, M325, M500, M635, M800, M1250, and M2500. |
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.
NOTE: Certified for water treatment plant applications. This product has not been evaluated for point of use applications.
Facility : Palu, Sulawesi Tengah, Indonesia
Process Media
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Granular Activated Carbon[1] [2] [3] |
||||
2142 | 12 x 30 mesh | CLD 23 | GAC | |
2296 | [4] | CLD 23 | GAC | |
2297 | [4] | CLD 23 | GAC | |
2307 | 12 x 30 mesh | CLD 23 | GAC | |
2308 | 20 x 50 mesh | CLD 23 | GAC | |
2490 | 12 x 40 mesh | CLD 23 | GAC | |
3005 50x200 | 50 x 200 mesh | CLD 23 | GAC | |
3036 20x50 | 20 x 50 mesh | CLD 23 | GAC | |
3160 325XF | 325 x F mesh | CLD 23 | GAC | |
3164 325XF | 325 x F mesh | CLD 23 | GAC | |
7038 | [4] | CLD 23 | GAC | |
7085 | [4] | CLD 23 | GAC | |
7491 | 30 x 60 mesh | CLD 23 | GAC | |
7701 | 50 x 200 mesh | CLD 23 | GAC | |
7728 | [4] | CLD 23 | GAC | |
7729 | [4] | CLD 23 | GAC | |
7736 | 8 x 30 mesh | CLD 23 | GAC | |
AK5 XX | [4] | CLD 23 | GAC | |
AKO XX | [4] | CLD 23 | GAC | |
AT5 XX | [4] | CLD 23 | GAC | |
ATO XX | [4] | CLD 23 | GAC | |
DE5 XX | [4] | CLD 23 | GAC | |
DEO XX | [4] | CLD 23 | GAC | |
HR5 XX | [4] | CLD 23 | GAC | |
HRO XX | [4] | CLD 23 | GAC | |
HT5 XX | [4] | CLD 23 | GAC | |
HTO XX | [4] | CLD 23 | GAC | |
NV5 XX | [4] | CLD 23 | GAC | |
NVO XX | [4] | CLD 23 | GAC | |
OLC 12x30 | 12 x 30 mesh | CLD 23 | GAC | |
OLC 12x40 | 12 x 40 mesh | CLD 23 | GAC | |
OLC 816 | 8 x 16 mesh | CLD 23 | GAC | |
OLC 820 | 8 x 20 mesh | CLD 23 | GAC | |
OLC PLUS 12x30E | 12 x 30 mesh | CLD 23 | GAC | |
OLC Plus 20x50 | 20 x 50 mesh | CLD 23 | GAC | |
PH5 XX | [4] | CLD 23 | GAC | |
PHO XX | [4] | CLD 23 | GAC | |
RWA A | [4] | CLD 23 | GAC | |
RWA C | [4] | CLD 23 | GAC | |
RWA D | [4] | CLD 23 | GAC | |
RWA G | [4] | CLD 23 | GAC | |
RWA M | [4] | CLD 23 | GAC | |
RWA O | [4] | CLD 23 | GAC | |
RWA P | [4] | CLD 23 | GAC | |
RWA S | [4] | CLD 23 | GAC | |
RWA T | [4] | CLD 23 | GAC | |
RWA X | [4] | CLD 23 | GAC | |
SA5 XX | [4] | CLD 23 | GAC | |
SAO XX | [4] | CLD 23 | GAC | |
SD5 XX | [4] | CLD 23 | GAC | |
SDO XX | [4] | CLD 23 | GAC | |
SE5 XX | [4] | CLD 23 | GAC | |
SEO XX | [4] | CLD 23 | GAC | |
STO XX | [4] | CLD 23 | GAC | |
TN5 XX | [4] | CLD 23 | GAC | |
TNO XX | [4] | CLD 23 | GAC | |
YA5 XX | [4] | CLD 23 | GAC | |
YAO XX | [4] | CLD 23 | GAC | |
[1] The carbon source is coconut shell. [2] The trade designations may also include CF4 which indicates non-washed GAC. [3] Prefix "R" is used to identify the material (R - Renewable material source like coconut/palm shell). There will also be a four digit suffix to indicate the other parameters of the product (such as iodine number, particle size etc.) These codes are customer specific and generated at random. [4] Approved mesh sizes: Certified for any ASTM mesh combinations between: 3 x 6 - 100 x 2500. |
||||
Powdered Activated Carbon[1] [3] [5] |
||||
2296 | [6] | CLD 23 | PAC | |
2297 | [6] | CLD 23 | PAC | |
2518 | M325 mesh | CLD 23 | PAC | |
7038 | [6] | CLD 23 | PAC | |
7085 | [6] | CLD 23 | PAC | |
7156 | M325 mesh | CLD 23 | PAC | |
7725 | M325 mesh | CLD 23 | PAC | |
7728 | [6] | CLD 23 | PAC | |
7729 | [6] | CLD 23 | PAC | |
AK5 XX | [6] | CLD 23 | PAC | |
AKO XX | [6] | CLD 23 | PAC | |
AT5 XX | [6] | CLD 23 | PAC | |
ATO XX | [6] | CLD 23 | PAC | |
DE5 XX | [6] | CLD 23 | PAC | |
DEO XX | [6] | CLD 23 | PAC | |
HR5 XX | [6] | CLD 23 | PAC | |
HRO XX | [6] | CLD 23 | PAC | |
HT5 XX | [6] | CLD 23 | PAC | |
HTO XX | [6] | CLD 23 | PAC | |
NV5 XX | [6] | CLD 23 | PAC | |
NVO XX | [6] | CLD 23 | PAC | |
PH5 XX | [6] | CLD 23 | PAC | |
PHO XX | [6] | CLD 23 | PAC | |
RWA A | [6] | CLD 23 | PAC | |
RWA C | [6] | CLD 23 | PAC | |
RWA D | [6] | CLD 23 | PAC | |
RWA G | [6] | CLD 23 | PAC | |
RWA M | [6] | CLD 23 | PAC | |
RWA O | [6] | CLD 23 | PAC | |
RWA P | [6] | CLD 23 | PAC | |
RWA S | [6] | CLD 23 | PAC | |
RWA T | [6] | CLD 23 | PAC | |
RWA X | [6] | CLD 23 | PAC | |
SA5 XX | [6] | CLD 23 | PAC | |
SAO XX | [6] | CLD 23 | PAC | |
SD5 XX | [6] | CLD 23 | PAC | |
SDO XX | [6] | CLD 23 | PAC | |
SE5 XX | [6] | CLD 23 | PAC | |
SEO XX | [6] | CLD 23 | PAC | |
STO XX | [6] | CLD 23 | PAC | |
TN5 XX | [6] | CLD 23 | PAC | |
TNO XX | [6] | CLD 23 | PAC | |
WPC | M325 mesh | CLD 23 | PAC | |
YA5 XX | [6] | CLD 23 | PAC | |
YAO XX | [6] | CLD 23 | PAC | |
[1] The carbon source is coconut shell. [3] Prefix "R" is used to identify the material (R - Renewable material source like coconut/palm shell). There will also be a four digit suffix to indicate the other parameters of the product (such as iodine number, particle size etc.) These codes are customer specific and generated at random. [5] The trade designation may also include CF4 which indicates non-washed PAC. [6] The approved mesh sizes include: M100, M140, M170, M200, M325, M500, M635, M800, M1250, and M2500. |
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.
NOTE: Certified for water treatment plant applications. This product has not been evaluated for point of use applications.
Facility : Madampe, Sri Lanka
Process Media
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Granular Activated Carbon[1] [2] [3] [G] |
||||
2142 | 12 x 30 mesh | CLD 23 | GAC | |
2296 | [4] | CLD 23 | GAC | |
2297 | [4] | CLD 23 | GAC | |
2307 | 12 x 30 mesh | CLD 23 | GAC | |
2308 | 20 x 50 mesh | CLD 23 | GAC | |
2490 | 12 x 40 mesh | CLD 23 | GAC | |
3005 50x200 | 50 x 200 mesh | CLD 23 | GAC | |
3036 20x50 | 20 x 50 mesh | CLD 23 | GAC | |
3160 325XF | 325 x F mesh | CLD 23 | GAC | |
3164 325XF | 325 x F mesh | CLD 23 | GAC | |
7038 | [4] | CLD 23 | GAC | |
7085 | [4] | CLD 23 | GAC | |
7491 | 30 x 60 mesh | CLD 23 | GAC | |
7701 | 50 x 200 mesh | CLD 23 | GAC | |
7728 | [4] | CLD 23 | GAC | |
7729 | [4] | CLD 23 | GAC | |
7736 | 8 x 30 mesh | CLD 23 | GAC | |
AK5 XX | [4] | CLD 23 | GAC | |
AKO XX | [4] | CLD 23 | GAC | |
AT5 XX | [4] | CLD 23 | GAC | |
ATO XX | [4] | CLD 23 | GAC | |
DE5 XX | [4] | CLD 23 | GAC | |
DEO XX | [4] | CLD 23 | GAC | |
HR5 XX | [4] | CLD 23 | GAC | |
HRO XX | [4] | CLD 23 | GAC | |
HT5 XX | [4] | CLD 23 | GAC | |
HTO XX | [4] | CLD 23 | GAC | |
NV5 XX | [4] | CLD 23 | GAC | |
NVO XX | [4] | CLD 23 | GAC | |
OLC 12x30 | 12 x 30 mesh | CLD 23 | GAC | |
OLC 12x40 | 12 x 40 mesh | CLD 23 | GAC | |
OLC 816 | 8 x 16 mesh | CLD 23 | GAC | |
OLC 820 | 8 x 20 mesh | CLD 23 | GAC | |
OLC PLUS 12x30E | 12 x 30 mesh | CLD 23 | GAC | |
OLC Plus 20x50 | 20 x 50 mesh | CLD 23 | GAC | |
PH5 XX | [4] | CLD 23 | GAC | |
PHO XX | [4] | CLD 23 | GAC | |
RWA A | [4] | CLD 23 | GAC | |
RWA C | [4] | CLD 23 | GAC | |
RWA D | [4] | CLD 23 | GAC | |
RWA G | [4] | CLD 23 | GAC | |
RWA M | [4] | CLD 23 | GAC | |
RWA O | [4] | CLD 23 | GAC | |
RWA P | [4] | CLD 23 | GAC | |
RWA S | [4] | CLD 23 | GAC | |
RWA T | [4] | CLD 23 | GAC | |
RWA X | [4] | CLD 23 | GAC | |
SA5 XX | [4] | CLD 23 | GAC | |
SAO XX | [4] | CLD 23 | GAC | |
SD5 XX | [4] | CLD 23 | GAC | |
SDO XX | [4] | CLD 23 | GAC | |
SE5 XX | [4] | CLD 23 | GAC | |
SEO XX | [4] | CLD 23 | GAC | |
STO XX | [4] | CLD 23 | GAC | |
TN5 XX | [4] | CLD 23 | GAC | |
TNO XX | [4] | CLD 23 | GAC | |
YA5 XX | [4] | CLD 23 | GAC | |
YAO XX | [4] | CLD 23 | GAC | |
[1] The carbon source is coconut shell. [2] The trade designations may also include CF4 which indicates non-washed GAC. [3] Prefix "R" is used to identify the material (R - Renewable material source like coconut/palm shell). There will also be a four digit suffix to indicate the other parameters of the product (such as iodine number, particle size etc.) These codes are customer specific and generated at random. [4] Approved mesh sizes: Certified for any ASTM mesh combinations between: 3 x 6 - 100 x 2500. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||
Powdered Activated Carbon[1] [3] [5] [G] |
||||
2296 | [6] | CLD 23 | PAC | |
2297 | [6] | CLD 23 | PAC | |
2518 | M325 mesh | CLD 23 | PAC | |
7038 | [6] | CLD 23 | PAC | |
7085 | [6] | CLD 23 | PAC | |
7156 | M325 mesh | CLD 23 | PAC | |
7725 | M325 mesh | CLD 23 | PAC | |
7728 | [6] | CLD 23 | PAC | |
7729 | [6] | CLD 23 | PAC | |
AK5 XX | [6] | CLD 23 | PAC | |
AKO XX | [6] | CLD 23 | PAC | |
AT5 XX | [6] | CLD 23 | PAC | |
ATO XX | [6] | CLD 23 | PAC | |
DE5 XX | [6] | CLD 23 | PAC | |
DEO XX | [6] | CLD 23 | PAC | |
HR5 XX | [6] | CLD 23 | PAC | |
HRO XX | [6] | CLD 23 | PAC | |
HT5 XX | [6] | CLD 23 | PAC | |
HTO XX | [6] | CLD 23 | PAC | |
NV5 XX | [6] | CLD 23 | PAC | |
NVO XX | [6] | CLD 23 | PAC | |
PH5 XX | [6] | CLD 23 | PAC | |
PHO XX | [6] | CLD 23 | PAC | |
RWA A | [6] | CLD 23 | PAC | |
RWA C | [6] | CLD 23 | PAC | |
RWA D | [6] | CLD 23 | PAC | |
RWA G | [6] | CLD 23 | PAC | |
RWA M | [6] | CLD 23 | PAC | |
RWA O | [6] | CLD 23 | PAC | |
RWA P | [6] | CLD 23 | PAC | |
RWA S | [6] | CLD 23 | PAC | |
RWA T | [6] | CLD 23 | PAC | |
RWA X | [6] | CLD 23 | PAC | |
SA5 XX | [6] | CLD 23 | PAC | |
SAO XX | [6] | CLD 23 | PAC | |
SD5 XX | [6] | CLD 23 | PAC | |
SDO XX | [6] | CLD 23 | PAC | |
SE5 XX | [6] | CLD 23 | PAC | |
SEO XX | [6] | CLD 23 | PAC | |
STO XX | [6] | CLD 23 | PAC | |
TN5 XX | [6] | CLD 23 | PAC | |
TNO XX | [6] | CLD 23 | PAC | |
WPC | M325 mesh | CLD 23 | PAC | |
YA5 XX | [6] | CLD 23 | PAC | |
YAO XX | [6] | CLD 23 | PAC | |
[1] The carbon source is coconut shell. [3] Prefix "R" is used to identify the material (R - Renewable material source like coconut/palm shell). There will also be a four digit suffix to indicate the other parameters of the product (such as iodine number, particle size etc.) These codes are customer specific and generated at random. [5] The trade designation may also include CF4 which indicates non-washed PAC. [6] The approved mesh sizes include: M100, M140, M170, M200, M325, M500, M635, M800, M1250, and M2500. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.
NOTE: Certified for water treatment plant applications. This product has not been evaluated for point of use applications.
Facility : Chonburi, Thailand
Process Media
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Granular Activated Carbon[1] [2] [3] [G] |
||||
2142 | 12 x 30 mesh | CLD 23 | GAC | |
2296 | [4] | CLD 23 | GAC | |
2297 | [4] | CLD 23 | GAC | |
2307 | 12 x 30 mesh | CLD 23 | GAC | |
2308 | 20 x 50 mesh | CLD 23 | GAC | |
2490 | 12 x 40 mesh | CLD 23 | GAC | |
3005 50x200 | 50 x 200 mesh | CLD 23 | GAC | |
3036 20x50 | 20 x 50 mesh | CLD 23 | GAC | |
3160 325XF | 325 x F mesh | CLD 23 | GAC | |
3164 325XF | 325 x F mesh | CLD 23 | GAC | |
7038 | [4] | CLD 23 | GAC | |
7085 | [4] | CLD 23 | GAC | |
7491 | 30 x 60 mesh | CLD 23 | GAC | |
7701 | 50 x 200 mesh | CLD 23 | GAC | |
7728 | [4] | CLD 23 | GAC | |
7729 | [4] | CLD 23 | GAC | |
7736 | 8 x 30 mesh | CLD 23 | GAC | |
AK5 XX | [4] | CLD 23 | GAC | |
AKO XX | [4] | CLD 23 | GAC | |
AT5 XX | [4] | CLD 23 | GAC | |
ATO XX | [4] | CLD 23 | GAC | |
DE5 XX | [4] | CLD 23 | GAC | |
DEO XX | [4] | CLD 23 | GAC | |
HR5 XX | [4] | CLD 23 | GAC | |
HRO XX | [4] | CLD 23 | GAC | |
HT5 XX | [4] | CLD 23 | GAC | |
HTO XX | [4] | CLD 23 | GAC | |
NV5 XX | [4] | CLD 23 | GAC | |
NVO XX | [4] | CLD 23 | GAC | |
OLC 12x30 | 12 x 30 mesh | CLD 23 | GAC | |
OLC 12x40 | 12 x 40 mesh | CLD 23 | GAC | |
OLC 816 | 8 x 16 mesh | CLD 23 | GAC | |
OLC 820 | 8 x 20 mesh | CLD 23 | GAC | |
OLC PLUS 12x30E | 12 x 30 mesh | CLD 23 | GAC | |
OLC Plus 20x50 | 20 x 50 mesh | CLD 23 | GAC | |
PH5 XX | [4] | CLD 23 | GAC | |
PHO XX | [4] | CLD 23 | GAC | |
RWA A | [4] | CLD 23 | GAC | |
RWA C | [4] | CLD 23 | GAC | |
RWA D | [4] | CLD 23 | GAC | |
RWA G | [4] | CLD 23 | GAC | |
RWA M | [4] | CLD 23 | GAC | |
RWA O | [4] | CLD 23 | GAC | |
RWA P | [4] | CLD 23 | GAC | |
RWA S | [4] | CLD 23 | GAC | |
RWA T | [4] | CLD 23 | GAC | |
RWA X | [4] | CLD 23 | GAC | |
SA5 XX | [4] | CLD 23 | GAC | |
SAO XX | [4] | CLD 23 | GAC | |
SD5 XX | [4] | CLD 23 | GAC | |
SDO XX | [4] | CLD 23 | GAC | |
SE5 XX | [4] | CLD 23 | GAC | |
SEO XX | [4] | CLD 23 | GAC | |
STO XX | [4] | CLD 23 | GAC | |
TN5 XX | [4] | CLD 23 | GAC | |
TNO XX | [4] | CLD 23 | GAC | |
YA5 XX | [4] | CLD 23 | GAC | |
YAO XX | [4] | CLD 23 | GAC | |
[1] The carbon source is coconut shell. [2] The trade designations may also include CF4 which indicates non-washed GAC. [3] Prefix "R" is used to identify the material (R - Renewable material source like coconut/palm shell). There will also be a four digit suffix to indicate the other parameters of the product (such as iodine number, particle size etc.) These codes are customer specific and generated at random. [4] Approved mesh sizes: Certified for any ASTM mesh combinations between: 3 x 6 - 100 x 2500. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||
Powdered Activated Carbon[1] [3] [5] [G] |
||||
2296 | [6] | CLD 23 | PAC | |
2297 | [6] | CLD 23 | PAC | |
2518 | M325 mesh | CLD 23 | PAC | |
7038 | [6] | CLD 23 | PAC | |
7085 | [6] | CLD 23 | PAC | |
7156 | M325 mesh | CLD 23 | PAC | |
7725 | M325 mesh | CLD 23 | PAC | |
7728 | [6] | CLD 23 | PAC | |
7729 | [6] | CLD 23 | PAC | |
AK5 XX | [6] | CLD 23 | PAC | |
AKO XX | [6] | CLD 23 | PAC | |
AT5 XX | [6] | CLD 23 | PAC | |
ATO XX | [6] | CLD 23 | PAC | |
DE5 XX | [6] | CLD 23 | PAC | |
DEO XX | [6] | CLD 23 | PAC | |
HR5 XX | [6] | CLD 23 | PAC | |
HRO XX | [6] | CLD 23 | PAC | |
HT5 XX | [6] | CLD 23 | PAC | |
HTO XX | [6] | CLD 23 | PAC | |
NV5 XX | [6] | CLD 23 | PAC | |
NVO XX | [6] | CLD 23 | PAC | |
PH5 XX | [6] | CLD 23 | PAC | |
PHO XX | [6] | CLD 23 | PAC | |
RWA A | [6] | CLD 23 | PAC | |
RWA C | [6] | CLD 23 | PAC | |
RWA D | [6] | CLD 23 | PAC | |
RWA G | [6] | CLD 23 | PAC | |
RWA M | [6] | CLD 23 | PAC | |
RWA O | [6] | CLD 23 | PAC | |
RWA P | [6] | CLD 23 | PAC | |
RWA S | [6] | CLD 23 | PAC | |
RWA T | [6] | CLD 23 | PAC | |
RWA X | [6] | CLD 23 | PAC | |
SA5 XX | [6] | CLD 23 | PAC | |
SAO XX | [6] | CLD 23 | PAC | |
SD5 XX | [6] | CLD 23 | PAC | |
SDO XX | [6] | CLD 23 | PAC | |
SE5 XX | [6] | CLD 23 | PAC | |
SEO XX | [6] | CLD 23 | PAC | |
STO XX | [6] | CLD 23 | PAC | |
TN5 XX | [6] | CLD 23 | PAC | |
TNO XX | [6] | CLD 23 | PAC | |
WPC | M325 mesh | CLD 23 | PAC | |
YA5 XX | [6] | CLD 23 | PAC | |
YAO XX | [6] | CLD 23 | PAC | |
[1] The carbon source is coconut shell. [3] Prefix "R" is used to identify the material (R - Renewable material source like coconut/palm shell). There will also be a four digit suffix to indicate the other parameters of the product (such as iodine number, particle size etc.) These codes are customer specific and generated at random. [5] The trade designation may also include CF4 which indicates non-washed PAC. [6] The approved mesh sizes include: M100, M140, M170, M200, M325, M500, M635, M800, M1250, and M2500. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.
NOTE: Certified for water treatment plant applications. This product has not been evaluated for point of use applications.
Number of matching Manufacturers is 1
Number of matching Products is 412
Processing time was 0 seconds