NSF Product and Service Listings
These NSF Official Listings are current as of Saturday, July 12, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0211596&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
| Protech Chemicals Ltd. | |
| 7600, Ouest Henri Bourassa | |
| Saint-Laurent, QC H4S 1W3 | |
| Canada | |
| 514-745-0200 | |
| Visit this company's website |
Facility : York, PA
Protective (Barrier) Materials
| Water | Water | |||
| Water Contact | Contact | Contact | ||
| Trade Designation | Size Restriction | Temp | Material | |
|
Coatings - Fittings[1] [2] [G] |
||||
| G17SNSB2 BLUE | >= 1.5" | D. HOT | ACR | |
| G17SNSN2 BLACK | >= 1.5" | D. HOT | ACR | |
| G17SNSW2 WHITE | >= 1.5" | D. HOT | ACR | |
| WATERARMOR G17SNS | >= 1.5" | D. HOT | ACR | |
[1] Colors: Black, blue, white
Number of coats: 1 - 2
Maximum field use dry film thickness (in mils): 8
Recoat cure time and temperature: 2 minutes at 175°C
Final cure time and temperature: 2 minutes at 205°C
Special comments: Cure time refers to melt time.
[2] Colors: Black, blue, white
Number of coats: 6
Maximum field use dry film thickness (in mils): 40
Recoat cure time and temperature: 2 minutes at 175°C
Final cure time and temperature: 2 minutes at 205°C
Special comments: Cure time refers to melt time.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||
|
Coatings - Pipe[1] [2] [G] |
||||
| G17SNSB2 BLUE | >= 1.5" | D. HOT | ACR | |
| G17SNSN2 BLACK | >= 1.5" | D. HOT | ACR | |
| G17SNSW2 WHITE | >= 1.5" | D. HOT | ACR | |
| WATERARMOR G17SNS | >= 1.5" | D. HOT | ACR | |
[1] Colors: Black, blue, white
Number of coats: 1 - 2
Maximum field use dry film thickness (in mils): 8
Recoat cure time and temperature: 2 minutes at 175°C
Final cure time and temperature: 2 minutes at 205°C
Special comments: Cure time refers to melt time.
[2] Colors: Black, blue, white
Number of coats: 6
Maximum field use dry film thickness (in mils): 40
Recoat cure time and temperature: 2 minutes at 175°C
Final cure time and temperature: 2 minutes at 205°C
Special comments: Cure time refers to melt time.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||
|
Coatings - Tank[1] [2] [G] |
||||
| G17SNSB2 BLUE | >= 10 gal. | D. HOT | ACR | |
| G17SNSN2 BLACK | >= 10 gal. | D. HOT | ACR | |
| G17SNSW2 WHITE | >= 10 gal. | D. HOT | ACR | |
| WATERARMOR G17SNS | >= 10 gal. | D. HOT | ACR | |
[1] Colors: Black, blue, white
Number of coats: 1 - 2
Maximum field use dry film thickness (in mils): 8
Recoat cure time and temperature: 2 minutes at 175°C
Final cure time and temperature: 2 minutes at 205°C
Special comments: Cure time refers to melt time.
[2] Colors: Black, blue, white
Number of coats: 6
Maximum field use dry film thickness (in mils): 40
Recoat cure time and temperature: 2 minutes at 175°C
Final cure time and temperature: 2 minutes at 205°C
Special comments: Cure time refers to melt time.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||
|
Coatings - Valve[1] [2] [G] |
||||
| G17SNSB2 BLUE | >= 1.5" | D. HOT | ACR | |
| G17SNSN2 BLACK | >= 1.5" | D. HOT | ACR | |
| G17SNSW2 WHITE | >= 1.5" | D. HOT | ACR | |
| WATERARMOR G17SNS | >= 1.5" | D. HOT | ACR | |
[1] Colors: Black, blue, white
Number of coats: 1 - 2
Maximum field use dry film thickness (in mils): 8
Recoat cure time and temperature: 2 minutes at 175°C
Final cure time and temperature: 2 minutes at 205°C
Special comments: Cure time refers to melt time.
[2] Colors: Black, blue, white
Number of coats: 6
Maximum field use dry film thickness (in mils): 40
Recoat cure time and temperature: 2 minutes at 175°C
Final cure time and temperature: 2 minutes at 205°C
Special comments: Cure time refers to melt time.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||
Number of matching Manufacturers is 1
Number of matching Products is 16
Processing time was 0 seconds
