NSF Product and Service Listings

These NSF Official Listings are current as of Friday, December 26, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0211624&Standard=061&


NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.

 
Zhejiang Sunmixer Sanitary Ware Co., Ltd. 
Science & Technology Industrial
Zone, Chumen Yuhuan 
Zhejiang 317605 
China 
86 576 8712 1420


Facility : Yuhuan, China

Mechanical Plumbing Devices

Trade Designation      

Commercial Faucets[G] [Q]
8700-X[1]      
87000-1[2]      
87000-2[2]      
9800-XDJ[1]      
9800-X[1]      
98000MN-A      
98000MN-AC      
98001-1[2]      
98001-2[2] [3]      
98001-M001 Deck Mounted Pre-Rinse[2]      
98001MN-1C[2]      
98001MN-1[2]      
98001MN-2C[2]      
98001MN-2[2]      
98002-1 Pre-Rinse Pull Down Unit      
98002-2 Pre-Rinse Unit      
98002-M001 8" Wall Mounted Pre-Rinse[2]      
98006-1 4" Two Handle Deck Mounted Pre-rinse Faucet with Union Joint      
98006-2      
98006-M001 4" Deck Mounted Pre-Rinse[2]      
98007-1 8" Two Handle Deck Mounted Pre-rinse Faucet with Union Joint      
98007-2      
98007-M001 8" Deck Mounted Pre-Rinse[2]      
98007MN-1      
98007MN-1C      
98007MN-2      
98007MN-2C      
98008-1 Single Handle Deck Mounted Pre-rinse Faucet      
98008-2      
98009-1 Pre-Rinse Assembly      
98009-2      
9801-XDJ[1]      
9801-X[1]      
98010-1      
98010-2      
98011-1      
98011-2      
98014-1      
98014-2      
9802-X[1]      
9803-X[1]      
9804-X[1]      
9805-X[1]      
9806-X[1]      
9807-X[1]      
9808-XVDJ[1]      
9808-X[1]      
9809-X[1]      
9810-XDJ[1]      
9810-X[1]      
9811-XDJ[1]      
9811-X[1]      
9812-XDJ[1]      
9812-XVDJ[1]      
9812-X[1]      
9813-XDJ[1]      
9813-X[1]      
9814-XDJ[1]      
9814-XVDJ[1]      
9814-X[1]      
9815-XDJ[1]      
9815-X[1]      
9816-XDJ[1]      
9816-X[1]      
9817-XDJ[1]      
9817-XVDJ[1]      
9817-X[1]      
9818-X[1]      
9819-X[1]      
9820-X[1]      
9821-X[1]      
9822-X[1]      
D9819-X[1]      
M98E-100      
M98E-112A      
M98E-12AD      
M98E-200      
M98E-212A      
M98E-300      
M98E-312A      
M98E-400      
M98E-412A      
M98E-500      
M98E-501SGX[1]      
M98E-501SNX[1]      
M98E-502SGX[1]      
M98E-502SNX[1]      
M98E-503SGX[1]      
M98E-503SNX[1]      
M98E-504SGX[1]      
M98E-504SNX[1]      
M98E-505SGX[1]      
M98E-505SNX[1]      
M98E-506SGX[1]      
M98E-506SNX[1]      
M98E-507SGX[1]      
M98E-507SNX[1]      
M98E-508SGX[1]      
M98E-508SNX[1]      
M98E-509SGX[1]      
M98E-509SNX[1]      
M98E-510SGX[1]      
M98E-510SNX[1]      
M98E-512A      
M98E-SG02[1]      
M98E-SN06[1]      
MN98E-106A[2]      
MN98E-306A[2]      
MN98E-506A[2]      
YB-8706      
YB-8707       

[1] X - 06/08/10/12/14/16/18 (for swing spout); designates length of spout in inches
    X - P1/P2/P3/P4/P5/P6 (for gooseneck spout)
    XDJ/XVDJ: X - 006/007/008/009 (for double-joint spouts)
[2] Models may include an "N" in the trade designation, which indicates an alternate
    connection between body and pre-rinse assembly.
[3] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.


[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

Faucet Body[G] [Q]
98-A Add-On Faucet for Pre-Rinse       

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

Faucet Spouts[G] [Q]
SNX[4]      
XVDJ[4]      
XS[4]      
P-X[4]      
SGX[4]      
XDJ[4]       

[4] P-X:  X - 0131/0132/0133/0134/0135/0136
    XDJ:  X - 006/007/008/009
    XS:   X - 006/008/010/012/014/016/018
    XVDJ: X - 006/007/008/009
    SGX:  X - 02/03/04
    SNX:  X - 06/08/10/12/14/16/18


[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

Glass Fillers[G] [Q]
9840-F      
9850D      
9850-F      
9850      
9840[6]      
9851[6]       

[6] Certification of Models 9840 and 9851 includes glass filler faucet only and no
    additional components.


[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

Hose[G] [Q]
M98E-H44[5]      
M98E-HX[5]      
98-HSX[5]       

[5] Model with suffix (-HX), x - 0.2m to 3m
    Model ending with suffix (-HSX), x - 0.2m


[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

Miscellaneous Faucet Components[G] [Q]
M98E-1SV Spray Valve and Handle      
M0098SV-124G Spray Valve 1.24 gpm      
M0098SV-065G Spray Valve 0.65gpm      
M0098SV1-124G Spray Valve 1.24 gpm       

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

Pre-Rinse Hose Assembly[G] [Q]
98-H Stainless Steel Hose       

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

Number of matching Manufacturers is 1
Number of matching Products is 132
Processing time was 0 seconds