NSF Product and Service Listings

These NSF Official Listings are current as of Monday, November 17, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0214540&Standard=061&


NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.

 
The Sierra Corporation 
11400 West 47th Street
Minnetonka, MN 55343 
United States 
952-938-7223


Facility : Minnetonka, MN

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Coatings - Fittings[1]
Sierra Epoxy RAL 1001 Beige >= 3" CLD 23 EPOXY
Sierra Epoxy RAL 3009 Red >= 3" CLD 23 EPOXY
Sierra Epoxy RAL 5009 Blue >= 3" CLD 23 EPOXY
Sierra Epoxy RAL 5017 Blue >= 3" CLD 23 EPOXY
Sierra Epoxy RAL 9003 White >= 3" CLD 23 EPOXY 

[1] Colors: Beige, blue, red, white
    Number of Coats: 2-4
    Maximum Field Use Dry Film Thickness (in mils): 16  (4 per coat)
    Recoat Cure Time and Temperature: 4 hours at 70ºF
    Final Cure Time and Temperature: 14 days at 70ºF
    Special Comments: Mix ratio of Part A:B is 1:1 by volume. Part A refers to the amine
    side and Part B refers to the Epoxy side. Apply 6 wet mils to achieve 4 dry mils.

Coatings - Valve[1]
Sierra Epoxy RAL 1001 Beige >=4" CLD 23 EPOXY
Sierra Epoxy RAL 3009 Red >=4" CLD 23 EPOXY
Sierra Epoxy RAL 5009 Blue >=4" CLD 23 EPOXY
Sierra Epoxy RAL 5017 Blue >=4" CLD 23 EPOXY
Sierra Epoxy RAL 9003 White >=4" CLD 23 EPOXY 

[1] Colors: Beige, blue, red, white
    Number of Coats: 2-4
    Maximum Field Use Dry Film Thickness (in mils): 16  (4 per coat)
    Recoat Cure Time and Temperature: 4 hours at 70ºF
    Final Cure Time and Temperature: 14 days at 70ºF
    Special Comments: Mix ratio of Part A:B is 1:1 by volume. Part A refers to the amine
    side and Part B refers to the Epoxy side. Apply 6 wet mils to achieve 4 dry mils.

Number of matching Manufacturers is 1
Number of matching Products is 10
Processing time was 0 seconds