NSF Product and Service Listings
These NSF Official Listings are current as of Friday, December 26, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0243587&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
| Cembrane A/S | |
| Nøglegårdsvej 10 | |
| Lynge 3540 | |
| Denmark | |
| 45 2 148 4321 | |
| Visit this company's website |
Facility : Texas, USA
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Filtration Devices/Components[1] [2] [3] |
||||
| SiC BLOX FX Series | N/A | D. HOT | MLTPL | |
[1] The SiC BLOX FX series stack is certified for a minimum daily permeate flow of 10,000
liters per day per module, up to ten (10) modules.
[2] The SiC BLOX FX series stack requires a 10.5 gallons per minute (gpm) flush per module
up to ten (10) for for five minutes with de-ionized water before use.
[3] The SiC BLOX FX series is certified for municipal treatment facilities end use.
|
||||
Facility : Lynge, Denmark
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Filtration Devices/Components[1] [2] [3] |
||||
| SiC BLOX FX Series | N/A | D. HOT | MLTPL | |
[1] The SiC BLOX FX series stack is certified for a minimum daily permeate flow of 10,000
liters per day per module, up to ten (10) modules.
[2] The SiC BLOX FX series stack requires a 10.5 gallons per minute (gpm) flush per module
up to ten (10) for for five minutes with de-ionized water before use.
[3] The SiC BLOX FX series is certified for municipal treatment facilities end use.
|
||||
Number of matching Manufacturers is 1
Number of matching Products is 2
Processing time was 0 seconds
