NSF Product and Service Listings

These NSF Official Listings are current as of Saturday, July 12, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0256599&Standard=061&


NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.

 
Jindal Saw Limited 
Jindal Centre
12, Bhikaji Cama Place 
New Delhi 110056 
India 
91 114 5021544
Visit this company's website


Facility : Gujarat, India

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ductile Iron Pipe
JSAW-JAL Asphaltic Lined (Seal Coated) Ductile Iron Pipe 3" - 42" CLD 23 MLTPL
JSAW-JAL Cement Mortar Lined Ductile Iron Pipe 3" - 42" CLD 23 MLTPL

Pipe[G]
Stainless Steel Welded Pipe 10" - 84" C. HOT SS
Stainless Steel Seamless Pipe/Tube 1.315" - 3.5" C. HOT SS 

[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.


NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


Facility : Maharashtra, India

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[1]
JSAW - JAL (DI Fittings) 40 - 2200 mm D. HOT MLTPL 

[1] Fitting configurations include the following:
    Double Flange Concentric Reducer (DFCR)
    All Flange Tee (AFT)
    All Socket Tee (AST) *
    Blank Flange
    Cap *
    Double Flange Bend (DFB) - 11.25°
    Double Flange Bend (DFB) - 22.50°
    Double Flange Bend (DFB) - 45.00°
    Double Flange Bend (DFB) - 90.00°
    Double Flange Duck Foot Bend (DFDFB) - 90°
    Double Flange Semi Circular Bend (DFSCB)
    Double Socket Bend (DSB) - 11.25° *
    Double Socket Bend (DSB) - 22.50° *
    Double Socket Bend (DSB) - 45.00° *
    Double Socket Bend (DSB) - 90.00° *
    Double Socket Collar *
    Double Socket Duck Foot Bend (DSDFB) - 90° *
    Double Socket Tee With Flange Branch (DSTFB) *
    End Plug *
    Flange Adaptor (FA)
    Flange Bell Mouth
    Flange Socket (FS) *
    Flange Spigot (FSG) *
    Flange Type MJ Collar
    MJ Collar Coupling
    MJ Gland
    PUDDLE
    Restrained Joint
    Retainer Ring
    Round Gland for Flange Type MJ Collar
    Welded Flange
    All Flange Cross
    All Socket Cross *
    Double Flange Eccentric Reducer (DFER)
    Double Flange With Flange Branch Level Invert Tee (Wash Out Tee)
    Double Flanged "S" 90 deg Bend
    Double Socket Concentric Reducer (DSCR) *
    Double Socket With Flange Branch Level Invert Tee (Wash Out Tee) *
    Plug *
    Reducing Flange
    Socket Flange Concentric Reducer (SFCR) *
    Split Puddle
    All Flange Cross Tee (AFC)
    Double Spigot Bend (DSPB) - 45.00° *
    Flange Socket Concentric Reducer (FSCR) *
    All Socket Y Tees (ASYT) *
    Socket Spigot with Flange Branch Tee *
    Coupling
    Coupling MS & DI
    Straight Coupling
    Dismantling Joint (DJ) Assembly
    Flange Spigot Pipe with Puddle *
    Double Spigot Pipe with Puddle *
    Double Flange Pipe with Puddle
    Double Socket Pipe with Puddle *
    Flange Socket Pipe with Puddle *
    Socket Spigot Pipe with Puddle *
    Double Flange Pipe
    Double Socket Pipe *
    Double Spigot Pipe *
    Flange Socket Pipe *
    Flange Spigot Pipe *
    Socket Spigot Pipe *
    *with Normal -Tyton or Double Chamber Restrained Joints



Facility : Uttar Pradesh, India

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pipe
Stainless Steel 304/304L Seamless Pipe/Tube 1/2" - 10" C. HOT SS
Stainless Steel 304/304L Welded Pipe/Tube 1/2" -12" C. HOT SS
Stainless Steel 316/316L Seamless Pipe/Tube 1/2" - 10" C. HOT SS
Stainless Steel 316/316L Welded Pipe/Tube 1/2" -12" C. HOT SS 

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.
Number of matching Manufacturers is 1
Number of matching Products is 9
Processing time was 1 seconds