NSF Product and Service Listings

These NSF Official Listings are current as of Monday, January 17, 2022 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0260703&Standard=061&



NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings.


 
LBS Enterprises, LLC DBA Allstates Coatings Company 
100 North Lee Drive
Gladewater, TX 75647 
United States 
903-845-6436
Visit this company's website


Facility : Gladewater, TX

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Coatings - Fittings[1]
ALT-215 Acrysphalt >= 1" CLD 23 ASPH
ALT-220 Acrysphalt >= 1" CLD 23 ASPH

[1] Colors: Black
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 4 (7.5 - 8 wet mils)
    Final Cure Time and Temperature: 96 hours @ 77ºF

Coatings - Pipe[1]
ALT-215 Acrysphalt >= 1" CLD 23 ASPH
ALT-220 Acrysphalt >= 1" CLD 23 ASPH

[1] Colors: Black
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 4 (7.5 - 8 wet mils)
    Final Cure Time and Temperature: 96 hours @ 77ºF

Coatings - Pump[1]
ALT-215 Acrysphalt >= 1" CLD 23 ASPH
ALT-220 Acrysphalt >= 1" CLD 23 ASPH

[1] Colors: Black
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 4 (7.5 - 8 wet mils)
    Final Cure Time and Temperature: 96 hours @ 77ºF

Coatings - Tank[1]
ALT-215 Acrysphalt >= 100 gal. CLD 23 ASPH
ALT-220 Acrysphalt >= 100 gal. CLD 23 ASPH

[1] Colors: Black
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 4 (7.5 - 8 wet mils)
    Final Cure Time and Temperature: 96 hours @ 77ºF

Coatings - Valve[1]
ALT-215 Acrysphalt >= 1" CLD 23 ASPH
ALT-220 Acrysphalt >= 1" CLD 23 ASPH

[1] Colors: Black
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 4 (7.5 - 8 wet mils)
    Final Cure Time and Temperature: 96 hours @ 77ºF


Number of matching Manufacturers is 1
Number of matching Products is 10
Processing time was 0 seconds