NSF Product and Service Listings
These NSF Official Listings are current as of Saturday, July 12, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0265151&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
| Great Plains Industries, Inc. | |
| 5252 East 36th Street North | |
| Wichita, KS 67220 | |
| United States | |
| 800-835-0113 | |
| 316-686-7361 | |
| Visit this company's website |
Facility : Wichita, KS
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Water Meters [G] |
||||
| QS2-(A)-(B)-P[2] | 6-12" | D. HOT | MLTPL | |
| QS200-10PW | 1" | D. HOT | MLTPL | |
| QS200-15PW | 1.5" | D. HOT | MLTPL | |
| QS200-20PW | 2" | D. HOT | MLTPL | |
| QS200-30PW | 3" | D. HOT | MLTPL | |
| QS200-40PW | 4" | D. HOT | MLTPL | |
| QS200-PW[3] | D. HOT | MLTPL | ||
| UM(A)(B)(C)(D)(E)(F)-(G)(H)-(J)(K)[1] | 1-12" | D. HOT | MLTPL | |
[1] UM (A)(B)(C)(D)(E)(F)-(G)(H)-(J)(K) where:
A - SIZE
025 = 1 Inch, PVC, Sch 80
040 = 1-1/2 Inch, PVC, Sch 80
050 = 2 Inch, PVC, Sch 80
080 = 3 Inch, PVC, Sch 80
100 = 4 Inch, PVC, Sch 80
150 = 6 inch, Saddle
200 = 8 inch, Saddle
250 = 10 inch, Saddle
300 = 12 inch, Saddle
B - Connection Type
SK = Socket (Meter w/ Tee: 1" to 4")
NF = NPT, Female (Meter w/ Tee: 1" to 4")
TF = BSPT, Female (Meter w/ Tee: 1", 1-1/2", 2")
FA = Flange, ANSI (Meter w/ Tee: 3", 4")
FD = Flange, DIN (Meter w/ Tee: 3", 4")
ST = Tube (Meter w/ Saddle Only)
SP = Pipe (Meter w/ Saddle Only)
SI = Plastic Irrigation Pipe (Saddle Meter Only)
XX = Insert Sensor Only (No meter body)
C - Meter Body Material
P = PVC (Meter w/ Tee Only)
A = Aluminum (Meter w/ Saddle Only)
X = Insert Sensor Only (No meter body)
D - Wetted Internals
RU = Ryton Sensor Body, Ultem XDCRs, EPDM O-rings
XX = Replacement Display Only
E - Special Options
XX = Not applicable to UM meters
F- Meter Accuracy
A20 = 2% (All UM Meters)
XXX = N/A (Electronics Only)
G - Electronics
QUDSBA = Battery Powered Local Display
QUC1LP = Loop Powered 4-20mA w/ Pulse Output; Local Display
H - Certification
N1 = CE and NSF
J - Display Configuration
GM = Gallon per Minute
LM = Liter per Minute
K - Packaging Varies with configuration options
[2] QS2-(A)-(B)-P:
A = Pipe Size
060 = 6” diameter
080 = 8” diameter
100 = 10” diameter
120 = 12” diameter
B = Pipe Specification
NPS = NPS/IPS/ASME Pipe
TB = Metal Irrigation Tube Pipe
PIP = Plastic Irrigation Pipe
[3] QS-200PW is the sensor insert only.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||
Number of matching Manufacturers is 1
Number of matching Products is 8
Processing time was 0 seconds
