NSF Product and Service Listings
These NSF Official Listings are current as of Friday, December 26, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0337904&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
| Emerson - Rosemount, Micro Motion Inc. | |
| 12001 Technology Drive | |
| Eden Prairie, MN 55344-3695 | |
| United States | |
| 952-828-3125 |
Facility : Nanjing, China
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Water Meters[1] [G] |
||||
| Rosemount Model 8705[A][B][C][D][E][F][G][H][I][J][K][L][M][2] | .5" - 36" | CLD 23 | MLTPL | |
| Rosemount Model 8705[A][B][C][D][E][F][G][H][I][J][K][L][M][2] | .5" - 36" | C. HOT | MLTPL | |
| Rosemount Model 8711[A][B][C][D][E][F][G][H][I][J][K][L][3] | .5" - 8" | C. HOT | MLTPL | |
| Rosemount Model 8711[A][B][C][D][E][F][G][H][I][J][K][L][3] | .5" - 8" | CLD 23 | MLTPL | |
| Rosemount Model 8750W[A][B][C][D][E][F][G][H][I][J][K][L][M][4] | .5" - 40" | CLD 23 | MLTPL | |
| Rosemount Model 8750W[A][B][C][D][E][F][G][H][I][J][K][L][M][4] | .5" - 40" | C. HOT | MLTPL | |
[1] All NSF-61 approved products must have the "DW" option code.
[2] 8705[A][B][C][D][E][F][G][H][I][J][K][L][M]
A - Liner Material: T
B - Electrode Material: S or H
C - Electrode Type: A, B, E or F
D - Line Size: 005, 010, 015, 020, 025, 030, 040, 050, 060, 080, 100, 120, 140, 160,
180, 200, 240, 300, or 360. (Where 360 = 36 inches)
E - Flange Type = any one alpha or digital character
F - Flange Rating = any one alpha or digital character
G - Coil Housing Configuration = Any two-digit alpha or numeric characters
H - Safety Approval = Any zero to two-digit alpha or numeric characters
I - Submersion Protection = Any zero to three-digit alpha or numeric characters
J - Grounding Rings: G1, G2, G5 or G6
K - Any 0 to 50-digit alpha or numeric characters
L - Drinking Water Certification: DW
M - Any 0 to 50-digit alpha or numeric characters
8705[A][B][C][D][E][F][G][H][I][J][K][L][M]
A - Liner Material: T
B - Electrode Material: S or H
C - Electrode Type: A, B, E or F
D - Line Size: 005, 010, 015, 020, 025, 030, 040, 050, 060, 080, 100, 120, 140, 160,
180, 200, 240, 300, or 360. (Where 360 = 36 inches)
E - Flange Type = any one alpha or digital character
F - Flange Rating = any one alpha or digital character
G - Coil Housing Configuration = Any two-digit alpha or numeric characters
H - Safety Approval = Any zero to two-digit alpha or numeric characters
I - Submersion Protection = Any zero to three-digit alpha or numeric characters
J - Grounding Rings: G1, G2, G5 or G6
K - Any 0 to 50-digit alpha or numeric characters
L - Drinking Water Certification: DW
M - Any 0 to 50-digit alpha or numeric characters
[3] 8711[A][B][C][D][E][F][G][H][I][J][K][L]
A - Liner Material: S
B - Electrode Material: S or H
C - Electrode Type: A, B, E or F
D - Line Size: 005, 010, 015, 020, 025, 030, 040, 050, 060, or 080. (Where 080 = 8
inches)
E - Transmitter Mount: any one alpha or digital character
F - Mating Flange = any one alpha or digital character
G - Safety Approval = Any zero to two-digit alpha or numeric characters
H - Submersion Protection = Any zero to three-digit alpha or numeric characters
I - Grounding Rings: G1, G2, G5 or G6
J - Any 0 to 50-digit alpha or numeric characters
K - Drinking Water Certification: DW
L - Any 0 to 50-digit alpha or numeric characters
[4] 8750W[A][B][C][D][E][F][G][H][I][J][K][L][M]
A - Sensor Design Revision: any one alpha or digital character
B - Transmitter Class: any one alpha or digital character
C - Transmitter Power: any one alpha or digital character
D - Conduit Entries: any one alpha or digital character
E - Sensor style: any one alpha or digital character
F - Liner Material: T
G - Electrode Material: S or H
H - Electrode Type: A, B, E or F
I - Line Size: 005, 010, 015, 020, 025, 030, 040, 050, 060, 080, 100, 120, 140, 160,
180, 200,
240, 300, 360, or 400. (Where 400 = 40 inches)
J - Any 0 to 50-digit alpha or numeric characters
K - Grounding Rings: G1, G2, G5 or G6
L - Drinking Water Certification: DW
M - Any 0 to 50-digit alpha or numeric characters
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements
for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||
Facility : Chihuahua, Mexico
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Water Meters[1] [G] |
||||
| Rosemount Model 8705 [A][B][C][D][E][F][G][H][I][J][K][L][M] [9] [PFAS] | 0.5 - 36 | C. HOT | MLTPL | |
| Rosemount Model 8705[A][B][C][D][E][F][G][H][I][J][K][L][M][2] [3] | .5" - 36" | CLD 23 | MLTPL | |
| Rosemount Model 8705[A][B][C][D][E][F][G][H][I][J][K][L][M][4] | .5" - 36" | C. HOT | MLTPL | |
| Rosemount Model 8711[A][B][C][D][E][F][G][H][I][J][K][L][6] | .5" - 8" | C. HOT | MLTPL | |
| Rosemount Model 8711[A][B][C][D][E][F][G][H][I][J][K][L][3] [5] | .5" - 8" | CLD 23 | MLTPL | |
| Rosemount Model 8750W [A][B][C][D][E][F][G][H][I][J][K][L][M][N][O][10] [PFAS] | .5 - 36 | C. HOT | MLTPL | |
| Rosemount Model 8750W[A][B][C][D][E][F][G][H][I][J][K][L][M][N][O][3] [7] | .5" - 48" | CLD 23 | MLTPL | |
| Rosemount Model 8750W[A][B][C][D][E][F][G][H][I][J][K][L][M][N][O][8] | .5" - 48" | C. HOT | MLTPL | |
| Rosemount Model MS [A][B][C][D][E][F][G][H][I][J][K][L][11] [PFAS] | 0.5 - 36 | C. HOT | MLTPL | |
[1] All NSF-61 approved products must have the "DW" option code.
[2] 8705 [A][B][C][D][E][F][G][H][I][J][K][L][M]
A - Liner Material - T (Line sizes - 0.5 inch to 36 inch) or P (Line sizes - 4 inch to
36 inch)
B - Electrode Material - S or H
C - Electrode Type - A, B, E or F
D - Line Size - 005**, 010**, 015**, 020**, 025**, 030**, 040, 050, 060, 080, 100, 120,
140, 160, 180, 200, 240, 300, or 360. (Where 360 = 36 inches) (** Line size
authorized for only Liner Material - T)
E - Flange Type - any one alpha or digital character
F - Flange Rating - any one alpha or digital character
G - Coil Housing Configuration - any two-digit alpha or numeric characters
H - Safety Approval - any zero to two-digit alpha or numeric characters
I - Submersion Protection - any zero to three-digit alpha or numeric characters
J - Grounding Rings - G1, G2, G5, G6 or no characters
K - Additional Options - any 0 to 50-digit alpha or numeric characters
L - Drinking Water Certification - DW
M - Additional Options - any 0 to 50-digit alpha or numeric characters
[3] Certification includes electrodes and optional grounding rings made from 316 Stainless
Steel or Nickel alloy. Certification does not include grounding rings from any other
material or lining protectors.
[4] 8705[A][B][C][D][E][F][G][H][I][J][K][L][M]
A - Liner Material - T
B - Electrode Material - S or H
C - Electrode Type - A, B, E or F
D - Line Size - 005, 010, 015, 020, 025, 030, 040, 050, 060, 080, 100, 120, 140, 160,
180, 200, 240, 300, or 360. (Where 360 = 36 inches)
E - Flange Type - any one alpha or digital character
F - Flange Rating - any one alpha or digital character
G - Coil Housing Configuration - any two-digit alpha or numeric characters
H - Safety Approval - any zero to two-digit alpha or numeric characters
I - Submersion Protection - any zero to three-digit alpha or numeric characters
J - Grounding Rings - G1, G2, G5, G6 or no characters
K - Additional Options - any 0 to 50-digit alpha or numeric characters
L - Drinking Water Certification - DW
M - Additional Options - any 0 to 50-digit alpha or numeric characters
[5] 8711 [A][B][C][D][E][F][G][H][I][J][K][L]
A - Liner Material - S
B - Electrode Material - S or H
C - Electrode Type - A, B, E or F
D - Line Size - 005, 010, 015, 020, 025, 030, 040, 050, 060, or 080.
(Where 080 = 8 inches)
E - Transmitter Mount - any one alpha or digital character
F - Mating Flange - any one alpha or digital character
G - Safety Approval - any zero to two-digit alpha or numeric characters
H - Submersion Protection - any zero to three-digit alpha or numeric characters
I - Grounding Rings - G1, G2, G5, G6 or no characters
J - Any 0 to 50-digit alpha or numeric characters
K - Drinking Water Certification - DW
L - Any 0 to 50-digit alpha or numeric characters
[6] 8711[A][B][C][D][E][F][G][H][I][J][K][L]
A - Liner Material - S
B - Electrode Material - S or H
C - Electrode Type - A, B, E or F
D - Line Size - 005, 010, 015, 020, 025, 030, 040, 050, 060, or 080.
(Where 080 = 8 inches)
E - Transmitter Mount - any one alpha or digital character
F - Mating Flange - any one alpha or digital character
G - Safety Approval - any zero to two-digit alpha or numeric characters
H - Submersion Protection - any zero to three-digit alpha or numeric characters
I - Grounding Rings - G1, G2, G5, G6 or no characters
J - Any 0 to 50-digit alpha or numeric characters
K - Drinking Water Certification - DW
L - Any 0 to 50 - digit alpha or numeric characters
[7] 8750W [A][B][C][D][E][F][G][H][I][J][K][L][M][N][O]
A - Sensor Design Revision - any one alpha or digital character
B - Transmitter Class - any one alpha or digital character
C - Transmitter Mount - any one alpha or digital character
D - Transmitter Power - any one alpha or digital character
E - Transmitter Outputs - any one alpha or digital character
F - Conduit Entries - any one alpha or digital character
G - Sensor style - any one alpha or digital character
H - Liner Material - T (Line sizes - 0.5 inch to 48 inch) or P (Line sizes - 4 inch to
48 inch)
I - Electrode Material - S or H
J - Electrode Type - A, B, E or F
K - Line Size - 005**, 010**, 015**, 020**, 025**, 030**, 040, 050, 060, 080, 100, 120,
140, 160, 180, 200, 240, 300, 360, 400,420, or 480. (Where 480 = 48 inches)
(** Line size authorized for only Liner Material - T)
L - Flange Type, Flange Rating, Flange Material, Safety Approvals, and Other options -
any three to 50-digit alpha or numeric characters
M - Grounding Rings - G1, G2, G5, G6 or no characters
N - Drinking Water Certification - DW
O - Additional Options - any 0 to 50-digit alpha or numeric characters
[8] 8750W[A][B][C][D][E][F][G][H][I][J][K][L][M][N][O]
A - Sensor Design Revision - any one alpha or digital character
B - Transmitter Class - any one alpha or digital character
C - Transmitter Mount - any one alpha or digital character
D - Transmitter Power - any one alpha or digital character
E - Transmitter Outputs - any one alpha or digital character
F - Conduit Entries - any one alpha or digital character
G - Sensor style - any one alpha or digital character
H - Liner Material - T
I - Electrode Material - S or H
J - Electrode Type - A, B, E or F
K - Line Size - 005, 010, 015, 020, 025, 030, 040, 050, 060, 080, 100, 120, 140, 160,
180, 200,240, 300, 360, 400,420, or 480. (Where 480 = 48 inches)
L - Flange Type, Flange Rating, Flange Material, Safety Approvals, and Other options -
Any three to 50-digit alpha or numeric characters
M - Grounding Rings - G1, G2, G5, G6 or no characters
N - Drinking Water Certification - DW
O - Additional Options - Any 0 to 50-digit alpha or numeric characters
[9] 8705[A][B][C][D][E][F][G][H][I][J][K][L][M]
A: Liner Material: H
B: Electrode Material: S or H
C: Electrode Type: A, B, E or F
D: Line Size: 005, 010, 015, 020, 025, 030, 040, 050, 060, 080, 100, 120, 140, 160,
180, 200, 240, 300, or 360. (Where 360 = 36 inches)
E: Flange Type = any one alpha or digital character
F: Flange Rating = any one alpha or digital character
G: Coil Housing Configuration = Any two-digit alpha or numeric characters
H: Safety Approval = Any zero to two-digit alpha or numeric characters
I: Submersion Protection = Any zero to three-digit alpha or numeric characters
J: Grounding Rings: G1, G2, G5, G6 or no characters
K: Additional Options: Any 0 to 50-digit alpha or numeric characters
L: Drinking Water Certification: DW
M: Additional Options: Any 0 to 50-digit alpha or numeric characters
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
[10] 8750W[A][B][C][D][E][F][G][H][I][J][K][L][M][N][O]
A: Sensor Design Revision: any one alpha or digital character
B: Transmitter Class: any one alpha or digital character
C: Transmitter Mount: any one alpha or digital character
D: Transmitter Power: any one alpha or digital character
E: Transmitter Outputs: any one alpha or digital character
F: Conduit Entries: any one alpha or digital character
G: Sensor style: any one alpha or digital character
H: Liner Material: H
I: Electrode Material: S or H
J: Electrode Type: A, B, E or F
K: Line Size: 005, 010, 015, 020, 025, 030, 040, 050, 060, 080, 100, 120, 140, 160,
180, 200, 240, 300 or 360. (Where 360 = 36 inches)
L: Flange Type, Flange Rating, Flange Material, Safety Approval
M: Grounding Rings: G1, G2, G5, G6 or no characters
N: Drinking Water Certification: DW
O: Additional Options: Any 0 to 50-digit alpha or numeric characters
[11] MS [A][B][C][D][E][F][G][H][I][J][K][L][M]
A - Line Size - 005, 010, 015, 020, 025, 030, 040, 050, 060, 080, 100, 120,140, 160,
180, 200, 240, 300, or 360. (Where 360 = 36 inches)
B – Revision level A
C – Mounting configuration – Remote Mount
D – Conduit Entries – ½ NPT or M20
E - Liner Material - H
F - Electrode Material - S or H
G – Electrode Type- A, B, E or F
H – Flange Material- any one alpha or digital character
I - Flange Type - any one alpha or digital character
J - Flange Rating - any one alpha or digital character
K - Coil Housing Configuration - any two-digit alpha or numeric characters
L - Safety Approval - any zero to two-digit alpha or numeric characters
M – Grounding Rings - G1, G2, G5, G6 or no characters
N - Drinking Water Certification – DW
O - Additional Options - any 0 to 50-digit alpha or numeric characters
[PFAS] Complies with US EPA Maximum Contaminant Levels (MCLs) for PFAS according to
NSF/ANSI/CAN 61.
|
||||
Number of matching Manufacturers is 1
Number of matching Products is 15
Processing time was 0 seconds
