NSF Product and Service Listings

These NSF Official Listings are current as of Friday, December 26, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0372546&Standard=061&


NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.

 
Jiangsu Bangtec Environmental Sci-Tech Co. Ltd. 
No. 28, Wenjing Road, Nantong high-tech Industrial Development Zone
Nantong, Jiangsu 226300 
China 
86 513 86598186
Visit this company's website


Facility : Nantong, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element[1] [G]
TB-4040 4 x 40 in CLD 23 MLTPL
TB-8040 8 x 40 in CLD 23 MLTPL
TBR-4040 4 x 40 in CLD 23 MLTPL
TBR-8040 8 x 40 in CLD 23 MLTPL
TU1-4040 4 x 40 in CLD 23 MLTPL
TU1-8040 8 x 40 in CLD 23 MLTPL
TU2-4040 4 x 40 in CLD 23 MLTPL
TU2-8040 8 x 40 in CLD 23 MLTPL
TU3-4040 4 x 40 in CLD 23 MLTPL
TU3-8040 8 x 40 in CLD 23 MLTPL
TX-4040 4 x 40 in CLD 23 MLTPL
TX-8040 8 x 40 in CLD 23 MLTPL 

[1] TX-4040 and TU2-4040 require a pre-service flush at 1.875 gallons per minute (gpm) for 6
    hours using tap water.
    TX-8040, TU2-8040 and TB-8040 require a pre-service flush at 8.33 gallons per minute
    (gpm) for 6 hours using tap water.
    TU3-8040 and TBR-8040 require a pre-service flush at 7.29 gallons per minute (gpm) for 6
    hours using tap water.
    TB-4040 and TBR-4040 require a pre-service flush at 1.67 gallons per minute (gpm) for 6
    hours using tap water.
    TU1-8040 requires a pre-service flush at 9.71 gallons per minute (gpm) for 6 hours using
    tap water.
    TU3-4040 requires a pre-service flush at 1.53 gallons per minute (gpm) for 6 hours using
    tap water.
    TU1-4040 requires a pre-service flush at 2.153 gallons per minute (gpm) for 6 hours
    using tap water.
    TU3-4040 is certified for a minimum daily flow of 2200 gallons per day for use in public
    water treatment facilities.
    TB-4040 and TBR-4040 are certified for a minimum daily flow of 2400 gallons per day for
    use in public water treatment facilities.
    TX-4040 and TU2-4040 are certified for a minimum daily flow of 2700 gallons per day for
    use in public water treatment facilities.
    TU1-4040 is certified for a minimum daily flow of 3100 gallons per day for use in public
    water treatment facilities.
    TU3-8040 and TBR-8040 are certified for a minimum daily flow of 10500 gallons per day
    for use in public water treatment facilities.
    TX-8040, TU2-8040 and TB-8040 are certified for a minimum daily flow of 12000 gallons
    per day for use in public water treatment facilities.
    TU1-8040 is certified for a minimum daily flow of 14000 gallons per day for use in
    public water treatment facilities.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Number of matching Manufacturers is 1
Number of matching Products is 12
Processing time was 0 seconds