NSF Product and Service Listings

These NSF Official Listings are current as of Friday, January 21, 2022 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0384827&Standard=061&



NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings.


 
Grauer & Weil India Ltd. 
Growel Corporate, Akurli Road
Kandivali E, Mumbai, Maharashtra 
400101 
India 
91 226 6993000
Visit this company's website


Facility : Dadra, India

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Coatings - Fittings[1]
Pentaline 1000 >= 6" CLD 23 EPOXY

[1] Colors : Red Oxide, Grey
    Number Of Coats: 1-2
    Maximum Field Use Dry Thickness(in mils): 20 mils
    Recoat Cure Time and Temperature : 8 hours at 34°C
    Final Cure Time/Temperature: 7 days at 34°C
    Special Comments: Mix ratio of Part A:B is 3:1 by volume.  Heat Part A and Part B to
    65°C and mix before application.

Coatings - Pipe[1]
Pentaline 1000 >= 14" CLD 23 EPOXY

[1] Colors : Red Oxide, Grey
    Number Of Coats: 1-2
    Maximum Field Use Dry Thickness(in mils): 20 mils
    Recoat Cure Time and Temperature : 8 hours at 34°C
    Final Cure Time/Temperature: 7 days at 34°C
    Special Comments: Mix ratio of Part A:B is 3:1 by volume.  Heat Part A and Part B to
    65°C and mix before application.

Coatings - Pump[1]
Pentaline 1000 >= 6" CLD 23 EPOXY

[1] Colors : Red Oxide, Grey
    Number Of Coats: 1-2
    Maximum Field Use Dry Thickness(in mils): 20 mils
    Recoat Cure Time and Temperature : 8 hours at 34°C
    Final Cure Time/Temperature: 7 days at 34°C
    Special Comments: Mix ratio of Part A:B is 3:1 by volume.  Heat Part A and Part B to
    65°C and mix before application.

Coatings - Tank[1]
Pentaline 1000 >= 200 Gallons CLD 23 EPOXY

[1] Colors : Red Oxide, Grey
    Number Of Coats: 1-2
    Maximum Field Use Dry Thickness(in mils): 20 mils
    Recoat Cure Time and Temperature : 8 hours at 34°C
    Final Cure Time/Temperature: 7 days at 34°C
    Special Comments: Mix ratio of Part A:B is 3:1 by volume.  Heat Part A and Part B to
    65°C and mix before application.

Coatings - Valve[1]
Pentaline 1000 >= 6" CLD 23 EPOXY

[1] Colors : Red Oxide, Grey
    Number Of Coats: 1-2
    Maximum Field Use Dry Thickness(in mils): 20 mils
    Recoat Cure Time and Temperature : 8 hours at 34°C
    Final Cure Time/Temperature: 7 days at 34°C
    Special Comments: Mix ratio of Part A:B is 3:1 by volume.  Heat Part A and Part B to
    65°C and mix before application.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Number of matching Manufacturers is 1
Number of matching Products is 5
Processing time was 0 seconds