NSF Product and Service Listings

These NSF Official Listings are current as of Friday, December 26, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0389807&Standard=061&


NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.

 
Akzo Nobel India Limited 
Plot # 62P, 62A, 62B, 42E
Hoskote Industrial Area 
Bangalore, Karnataka 562114 
India 
91 80 22895000
Visit this company's website


Facility : Karnataka, India

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Coatings - Fittings
Polibrid 705E[1] >=4" CLD 23 PUR 

[1] Colors: Buff
    Number Of Coats: 1
    Maximum Field Use Dry Thickness (in mils): 120 mils
    Final Cure Time/Temperature: 7 days at 5-50°C
    Special Comments: Mix ratio of Part A:B is 2:1 by volume.

Coatings - Pipe
Interline 925P[2] >= 16 in CLD 23 EPOXY
Polibrid 705E[1] >=10" CLD 23 PUR 

[1] Colors: Buff
    Number Of Coats: 1
    Maximum Field Use Dry Thickness (in mils): 120 mils
    Final Cure Time/Temperature: 7 days at 5-50°C
    Special Comments: Mix ratio of Part A:B is 2:1 by volume.
[2] Colors: Off White
    Number Of Coats: 1
    Maximum Field Use Dry Thickness (in mils): 24 mils
    Final Cure Time/Temperature: 7 days at 25°C
    Special Comments: Mix ratio of Part A:B is 3:1 by volume.

Coatings - Pump
Polibrid 705E[1] >=25 Gallons CLD 23 PUR 

[1] Colors: Buff
    Number Of Coats: 1
    Maximum Field Use Dry Thickness (in mils): 120 mils
    Final Cure Time/Temperature: 7 days at 5-50°C
    Special Comments: Mix ratio of Part A:B is 2:1 by volume.

Coatings - Tank
Interline 925P[2] >= 200 gal CLD 23 EPOXY
Polibrid 705E[1] >=4" CLD 23 PUR 

[1] Colors: Buff
    Number Of Coats: 1
    Maximum Field Use Dry Thickness (in mils): 120 mils
    Final Cure Time/Temperature: 7 days at 5-50°C
    Special Comments: Mix ratio of Part A:B is 2:1 by volume.
[2] Colors: Off White
    Number Of Coats: 1
    Maximum Field Use Dry Thickness (in mils): 24 mils
    Final Cure Time/Temperature: 7 days at 25°C
    Special Comments: Mix ratio of Part A:B is 3:1 by volume.

Coatings - Valve
Interline 925P[2] >= 2 in CLD 23 EPOXY 

[2] Colors: Off White
    Number Of Coats: 1
    Maximum Field Use Dry Thickness (in mils): 24 mils
    Final Cure Time/Temperature: 7 days at 25°C
    Special Comments: Mix ratio of Part A:B is 3:1 by volume.

Number of matching Manufacturers is 1
Number of matching Products is 7
Processing time was 0 seconds