NSF Product and Service Listings

These NSF Official Listings are current as of Monday, May 23, 2022 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0454038&Standard=061&



NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings.


 
GEMÜ Gebr. Müller Apparatebau GmbH & Co. KG 
Fritz-Müller-Straße 6-8
74653 Ingelfingen 
Germany 
49 7940 1230
Visit this company's website


Facility : Ingelfingen, Germany

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[1] [2] [G]
GEMÜ 610-v-D-w-1-x-y-z 12 mm - 15 mm D. HOT MLTPL
GEMÜ 613-u-D-v-1-w-x-y-z 12 mm - 15 mm D. HOT MLTPL
GEMÜ 617-v-D-w-1-x-0 12 mm - 15 mm D. HOT MLTPL
GEMÜ 630-v-D-w-1-x-1-1/N 12 mm - 15 mm D. HOT MLTPL
GEMÜ R647-u-D-v-1-w-x-y 15 mm - 50 mm D. HOT MLTPL
GEMÜ R649-u-D-v-1-w-x-y 15 mm - 65 mm D. HOT MLTPL
GEMÜ R677-u-D-v-1-w-x-y-z 15 mm - 100 mm D. HOT MLTPL
GEMÜ R690-u-D-v-1-w-x-y-D-z 15 mm - 100 mm D. HOT MLTPL
GEMÜ R693-u-D-v-1-w-x-y 15 mm - 50 mm D. HOT MLTPL

[1] 610-v-D-w-1-x-y-z, 617-v-D-w-1-x-0, and 630-v-D-w-1-x-1-1/N model numbers indicates:
    v - Nominal Size:
        12 & 15mm
    D - Body Configuration, 2/2-way body (D)
    w – Connection:
        Threaded sockets DIN ISO 228 - 1
        Solvent cement sockets DIN - 2
        Union ends with DIN insert (socket) - 7
        Union ends with inch insert - BS (socket) - 33
    1 - Valve body material, PVC-U grey (1)
    x - Diaphragm material, EPDM:
        EPDM ICEM6001 - 17
        EPDM ICEM7007 - 19
    y - Control Function:
        Normally closed (NC) - 1 (only option for 630 model)
        Normally open (NO) - 2
        Double acting (DA) - 3
        Manually operated - 0 (only available for the 617 model)
    z - Actuator size/version:
        Diaphragm size 10 (control air connector at 90° to flow direction) - 1/N
        Diaphragm size 10 (Control air connector in flow direction) - 1RN
        Piston ø 54 - 1/N (only available for the 630 model)
        (This is not an option for the 617 model)
    
    R690-u-D-v-1-w-x-y-D-z and R647-u-D-v-1-w-x-y model numbers indicate:
    u - Nominal Size:
        15, 20, 25, 32, 40, 50, 65, 80, & 100mm
    D - Body Configuration, 2/2-way body (D)
    v - Connection:
        Spigots DIN for socket solvent cementing/welding - 0
        Flanges EN 1092 / PN10 / form B - 4
        Union ends with DIN insert (socket) - 7
        Union ends with Rp threaded socket inserts - 7R
        Spigots - inch for socket solvent cementing/welding - 30
        Union ends with inch insert - BS (socket) - 33
        Flanges ANSI Class 125/150 RF - 39
        Union ends with inch ASTM insert (socket) - 3M
        Union ends with JIS insert (socket) - 3T
    1 - Valve body material, PVC-U grey (1)
    w - Diaphragm material, EPDM:
        EPDM ICEM6001 - 17
        EPDM ICEM7007 - 19
    x - Control Function:
        Normally closed (NC) - 1 (only available in the R690 model)
        Normally open (NO) - 2 (only available in the R690 model)
        Double acting (DA) - 3 (only available in the R690 model)
        Closed by control pressure, opened by operating pressure - 5 (only available in the 
        R647 model)
    y - Actuator size:
        Diaphragm size 20 (DN 15, 20, 25) - E or ED
        Diaphragm size 25 (DN 32) - F or FD
        Diaphragm size 40 (DN 40, 50) - H or HD
        Diaphragm size 50 (DN 65) - K (only available in the R690 model)
        Diaphragm size 80 (DN 80) - M (only available in the R690 model)
        Diaphragm size 100 (DN 100) - N (only available in the R690 model)
    D - Actuator version (base), for body configuration D (only available in the R690 model)
    z – Spring set (only available in the R690 model):
        Low - L
        Medium - M
        Standard - N
    
    613-u-D-v-1-w-x-y-z model number indicates:
    u - Nominal Size:
        12 & 15mm
    D - Body Configuration, 2/2-way body (D)
    v – Connection:
        Threaded sockets DIN ISO 228 - 1
        Solvent cement sockets DIN - 2
        Union ends with DIN insert (socket) - 7
        Union ends with inch insert - BS (socket) - 33
    1 - Valve body material, PVC-U grey (1)
    w - Diaphragm material, EPDM:
        EPDM ICEM6001 - 17
        EPDM ICEM7007 - 19
    x – Supply voltage/mains frequency:
        24 V 50/60 Hz - C4
        120 V 50/60 Hz - G4
        230 V 50/60 Hz - L4
    y – Functional module:
        OPEN / CLOSE control with additional end position feedback (signal voltage - supply
        voltage) - AE
        OPEN / CLOSE control with potentiometer output - AP
        Control of valve position, actual value detection internal, set value external, 0 - 
        10 V - E1
        Control of valve position, actual value detection internal, set value external, 0/4
    - 
        20 mA - E2
        Control of process variables, actual value external, 0/4 - 20 mA, set value
    external, 
        0/4 - 20 mA - E3
    z - Actuator version:
        Operating time 17 sec. - A0
        Operating time 45 sec. - A1
[2] R677-u-D-v-1-w-x-y-z model number indicates:
    u - Nominal Size:
        15, 20, 25, 32, 40, 50, 65, 80, & 100mm
    D - Body Configuration, 2/2-way body (D)
    v - Connection:
        Spigots DIN for socket solvent cementing/welding - 0
        Flanges EN 1092 / PN10 / form B - 4
        Union ends with DIN insert (socket) - 7
        Union ends with Rp threaded socket inserts - 7R
        Spigots - inch for socket solvent cementing/welding - 30
        Union ends with inch insert - BS (socket) - 33
        Flanges ANSI Class 125/150 RF - 39
        Union ends with inch ASTM insert (socket) - 3M
        Union ends with JIS insert (socket) - 3T
    1 - Valve body material, PVC-U grey (1)
    w - Diaphragm material, EPDM:
        EPDM ICEM6001 - 17
        EPDM ICEM7007 - 19
    x - Control Function:
        Manually operated - 0
        Manually operated (lockable handwheel) - L
    y – Bonnet Size:
        Diaphragm size 20 (DN 15, 20, 25) - ED
        Diaphragm size 25 (DN 32) - FD
        Diaphragm size 40 (DN 40, 50) - HD
        Diaphragm size 50 (DN 65) - KD
        Diaphragm size 80 (DN 80) - MD*
        Diaphragm size 100 (DN 100) - ND*
        * Code Z is standard
    z – Options:
        Threaded connection for position indicator - Z
    
    R693-u-D-v-1-w-x-y and R649-u-D-v-1-w-x-y model number indicates:
    u - Nominal Size:
        15, 20, 25, 32, 40, 50, 65, 80, & 100mm
    D - Body Configuration, 2/2-way body (D)
    v - Connection:
        Spigots DIN for socket solvent cementing/welding - 0
        Flanges EN 1092 / PN10 / form B - 4
        Union ends with DIN insert (socket) - 7
        Union ends with Rp threaded socket inserts - 7R
        Spigots - inch for socket solvent cementing/welding - 30
        Union ends with inch insert - BS (socket) - 33
        Flanges ANSI Class 125/150 RF - 39
        Union ends with inch ASTM insert (socket) - 3M
        Union ends with JIS insert (socket) - 3T
    1 - Valve body material, PVC-U grey (1)
    w - Diaphragm material, EPDM:
        EPDM ICEM6001 - 17
        EPDM ICEM7007 - 19
    x – Voltage/Frequency:
        24V 50/60 Hz ± 10% - C4 (only available for the R693 model)
        120V 50/60 Hz ± 10% - G4 (only available for the R693 model)
        230V 50/60 Hz ± 10% - L4 (only available for the R693 model)
        24 V DC - C1 (only available for the R649 model)
    y – Functional module:
        OPEN / CLOSE control with additional end position feedback - AE (only available for 
        the R693 model)
        OPEN / CLOSE control with potentiometer output - AP (only available for the R693 
        model)
        OPEN / CLOSE, process and positioner - L0 (only available for the R649 model)
    
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Number of matching Manufacturers is 1
Number of matching Products is 9
Processing time was 0 seconds