NSF Product and Service Listings
These NSF Official Listings are current as of Friday, December 26, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0454199&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
| Shalimar Paints Limited | |
| Plot No. 50 | |
| Jindal Stainless Centre, Sector 32 | |
| Gurgaon, Haryana 122001 | |
| India | |
| 91 124 4616600 |
Facility : Nashik, Maharashtra, India
Protective (Barrier) Materials
| Water | Water | |||
| Water Contact | Contact | Contact | ||
| Trade Designation | Size Restriction | Temp | Material | |
|
Coatings - Fittings[1] |
||||
| EPICOAT 1000 | >= 6" | CLD 23 | EPOXY | |
[1] Colors : Red, Grey
Number Of Coats: 1
Maximum Field Use Dry Thickness (in mils): 24 mils
Final Cure Time/Temperature: 7 days at 30°C
Special Comments: Mix ratio of resin to hardener is 3:1 by volume.
|
||||
|
Coatings - Pipe[1] |
||||
| EPICOAT 1000 | >= 8" | CLD 23 | EPOXY | |
[1] Colors : Red, Grey
Number Of Coats: 1
Maximum Field Use Dry Thickness (in mils): 24 mils
Final Cure Time/Temperature: 7 days at 30°C
Special Comments: Mix ratio of resin to hardener is 3:1 by volume.
|
||||
|
Coatings - Pump[1] |
||||
| EPICOAT 1000 | >= 6" | CLD 23 | EPOXY | |
[1] Colors : Red, Grey
Number Of Coats: 1
Maximum Field Use Dry Thickness (in mils): 24 mils
Final Cure Time/Temperature: 7 days at 30°C
Special Comments: Mix ratio of resin to hardener is 3:1 by volume.
|
||||
|
Coatings - Tank[1] |
||||
| EPICOAT 1000 | >=500 gal | CLD 23 | EPOXY | |
[1] Colors : Red, Grey
Number Of Coats: 1
Maximum Field Use Dry Thickness (in mils): 24 mils
Final Cure Time/Temperature: 7 days at 30°C
Special Comments: Mix ratio of resin to hardener is 3:1 by volume.
|
||||
|
Coatings - Valve[1] |
||||
| EPICOAT 1000 | >= 6" | CLD 23 | EPOXY | |
[1] Colors : Red, Grey
Number Of Coats: 1
Maximum Field Use Dry Thickness (in mils): 24 mils
Final Cure Time/Temperature: 7 days at 30°C
Special Comments: Mix ratio of resin to hardener is 3:1 by volume.
|
||||
Facility : Secundarabad, India
Protective (Barrier) Materials
| Water | Water | |||
| Water Contact | Contact | Contact | ||
| Trade Designation | Size Restriction | Temp | Material | |
|
Coatings - Fittings[1] |
||||
| EPIGARD SOLVENT FREE EPOXY FINISH RED | >= 6" | CLD 23 | EPOXY | |
[1] Colors: Red
Number Of Coats: 1
Maximium Field Use Dry Thickness (in mils): 24 mils
Final Cure Time/Temperature: 7 days at 30°C
Special Comments: Mix ratio of Part A:B is 3:1 by volume.
|
||||
|
Coatings - Pipe[1] |
||||
| EPIGARD SOLVENT FREE EPOXY FINISH RED | >= 36" | CLD 23 | EPOXY | |
[1] Colors: Red
Number Of Coats: 1
Maximium Field Use Dry Thickness (in mils): 24 mils
Final Cure Time/Temperature: 7 days at 30°C
Special Comments: Mix ratio of Part A:B is 3:1 by volume.
|
||||
|
Coatings - Pump[1] |
||||
| EPIGARD SOLVENT FREE EPOXY FINISH RED | >= 6" | CLD 23 | EPOXY | |
[1] Colors: Red
Number Of Coats: 1
Maximium Field Use Dry Thickness (in mils): 24 mils
Final Cure Time/Temperature: 7 days at 30°C
Special Comments: Mix ratio of Part A:B is 3:1 by volume.
|
||||
|
Coatings - Tank[1] |
||||
| EPIGARD SOLVENT FREE EPOXY FINISH RED | >= 500 gal. | CLD 23 | EPOXY | |
[1] Colors: Red
Number Of Coats: 1
Maximium Field Use Dry Thickness (in mils): 24 mils
Final Cure Time/Temperature: 7 days at 30°C
Special Comments: Mix ratio of Part A:B is 3:1 by volume.
|
||||
|
Coatings - Valve[1] |
||||
| EPIGARD SOLVENT FREE EPOXY FINISH RED | >= 6" | CLD 23 | EPOXY | |
[1] Colors: Red
Number Of Coats: 1
Maximium Field Use Dry Thickness (in mils): 24 mils
Final Cure Time/Temperature: 7 days at 30°C
Special Comments: Mix ratio of Part A:B is 3:1 by volume.
|
||||
Number of matching Manufacturers is 1
Number of matching Products is 10
Processing time was 0 seconds
