NSF Product and Service Listings

These NSF Official Listings are current as of Tuesday, October 28, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0559595&Standard=061&


NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.

 
Piedmont Pacific Inc. 
330 St-Vallier East
Suite 340 
Quebec City, QC G1K 9C5 
Canada 
34 944 740 557
Visit this company's website


Facility : Karachi, Pakistan

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Microfiltration Devices[1]
Code PSW-(1)(2)(3)(4)(5)(6)-(7)(8)[2] [3] C. HOT MLTPL
Piedmont Filter Cartridges[2] [3] C. HOT MLTPL
Piedmont Filter Cartridges PMB(1)-(2)-(3)-(4)[4] [3] C. HOT MLTPL 

[1] NSF has not conducted production control audits at this facility. Product Listing is
    based on type testing [ISO/IEC Guide 2: 1996(E/F/R) 14.5].
[2] (1) Media
           None - Extractables free polypropylene
           RO - Reverse osmosis
    (2) Length
          10 - 10"
          20 - 20"
          30 - 30"
          40 - 40"
          50 - 50"
    (3) Variation in length
          A - Specified length
          None - Nominal length
          Custom lengths are available from 10" to 72"
    (4) Micron rating (nominal)
          1 micron
          5 microns
          10 microns
          20 microns
          40 microns
          80 microns
          Custom micron rating available from 1 micron to 100 microns.
    (5) Outer diameter (mm)
          A - 63.5
          D - 100
          E - 60
         J - 114.5
         Custom outer diameters available from 55 mm to 155 mm.
    (6) End adapters
          E222 - Double 222 o-rings end cap
          E222/C - Two end caps, one with double 222 o-rings, other end flat closed
          EA - Spring end
          EF - Fin end
          EC - Closed end cap
          ER - Reusable stainless steel spring
          ES - Stepped end
          X - Extended core
         XT - Tapered extended core (all core media)
         None - No end adapters (double open end - DOE)
    (7) Core material
          S - Stainless steel 304/316L
         None - 100% polypropylene
    (8) Inner diameter (mm)
          27mm
          35mm
         Customer inner diameters are available in metal cores.
    Only cartridges 10" and longer have been reviewed and evaluated
[3] Only cartridges 10" and longer have been reviewed and evaluated for Standard 61. This
    product has not been reviewed or evaluated for point-of-use or point-of-entry
    applications.
[4] Super Fine Filter Cartridges PPF-(1)-(2)-(3)-(4) is denoted as follows:
    (1) Length in mm (254 – 1778)
    (2) Outer diameter in mm (50 – 150)
    (3) Weight in grams
    (4) Profile:
          P - Plain
          L - Lined
          G - Grooved
          D - Dotted
    Micron rating - available from 1 µm to 100 µm
    Inner Diameter (mm) – 28 mm – 29 mm

Number of matching Manufacturers is 1
Number of matching Products is 3
Processing time was 0 seconds