NSF Product and Service Listings

These NSF Official Listings are current as of Sunday, August 14, 2022 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0565616&Standard=061&



NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings.


 
Hydronix Water Technology / HydroScientific 
8630 Rochester Avenue
Rancho Cucamonga, CA 91730 
United States 
909-527-6996
Visit this company's website


Facility : 2A

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components[1] [2] [G]
HBBC-150-PX [3] CLD 23 MLTPL
HHFEC-XX-YY [4] CLD 23 MLTPL
HSC-XX-YYY [5] CLD 23 MLTPL
HSC-XXX-LT2 [6] CLD 23 MLTPL
SPC-XXX-YYZZZ [7] CLD 23 MLTPL
SPX-XXX-YYZZZ [8] CLD 23 MLTPL

[1] Flushing Procedure: 5 min flush with clean water.
[2] Certified for point of entry (POE) and municipal end uses.
[3] HBBC-150-PXX is denoted as follows:
    HBBC: Big Flow Cartridge
    150: GPM
    P: Pleated
    XX: 1 (1), 5 (5), 20 (20), 50 (50) Micron Rating
[4] HHFEC-XX-YY is denoted as follows:
    HHFEC: High Flow Filter Cartridges
    XX: 0.2 (0.2), 01 (1), 05 (5), 10 (10), 20 (20), 30 (30), 50 (50), 70 (70) Micron Rating
    YY: 20”, 23” (Blank), 40”, 60”
[5] HSC-XX-YYY is denoted as follows:
    XX: Length - 40 (9 5/8”) , 90 (19 ½”), 170 (30 ¾”)
    YYY: 0.2, 0.35, 0.45, 1, 5, 10, 20, 50, 100, 150 Micron Rating
    PPA or blank: PPA (Pleated All Poly), blank (Pleated Synthetic)
[6] HSC-XXX-LT2 is denoted as follows:
    XXX: Length - 40 (9 5/8”) , 90 (19 ½”), 170 (30 ¾”)
    LT2: 1 micron absolute
[7] SPC-XXX-YYZZZ is denoted as follows:
    SPC: Sediment Pleated Cartridge
    XXX: Outside Diameter – 25 (2.5”), 45 (4.5”)
    YY: Length - 10 (9 7/8”), 20 (20”), 30 (30”), 40 (40”)
    ZZZ: 0.2 (0.2), 01 (1), 05 (5), 10 (10), 20 (20), 30 (30), 50 (50), 100 (100) Micron
    Rating
[8] SPX-XXX-YYZZZ is denoted as follows:
    SPX: Sediment Pleated Cartridge
    XXX: Outside Diameter – 25 (2.5”), 45 (4.5”)
    YY: Length - 10 (9 7/8”), 20 (20”), 30 (30”), 40 (40”)	
    ZZZ: .2A (0.2), .35 (0.35), 01 or 01A (1), 05 (5), 10 (10), 20 (20), 30 (30), 50 (50),
    100 (100) Micron Rating
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



Facility : 1C

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices / Components[1] [2] [G]
Sediment Bonded Cartridge (SBC-XX-YYZZ) [3] CLD 23 PP
Sediment Bonded Cartridge (SBX-XX-YYZZ) [3] CLD 23 PP
Sediment Bonded Cartridge (WW-SB-XXYYZZ) [4] CLD 23 PP
Sediment Depth Cartridge (SDC-XX-YYZZ) [3] CLD 23 PP
Sediment Depth Cartridge (SDX-XX-YYZZ) [3] CLD 23 PP
Sediment Depth Cartridge (WW-SD-XXYYZZ) [4] CLD 23 PP
Sediment Grooved Cartridge (SGC-XX-YYZZ) [3] CLD 23 PP
Sediment Grooved Cartridge (SGX-XX-YYZZ) [3] CLD 23 PP
Sediment Grooved Cartridge (WW-SG-XXYYZZ) [4] CLD 23 PP
Sediment Wound Cartridge (SWC-XX-YYZZ) [3] CLD 23 PP
Sediment Wound Cartridge (SWX-XX-YYZZ) [3] CLD 23 PP

[1] Certified for point-of-entry (POE) and municipal end uses.
[2] Certification does not include inner core, adapters, o-rings, gaskets, or end caps.
[3] Sediment Bonded Cartridge (SBC-XX-YYZZ) 
    Sediment Bonded Cartridge (SBX-XX-YYZZ) 
    Sediment Grooved Cartridge (SGC-XX-YYZZ) 
    Sediment Grooved Cartridge (SGX-XX-YYZZ) 
    Sediment Depth Cartridge (SDC-XX-YYZZ) 
    Sediment Depth Cartridge (SDX-XX-YYZZ) 
    Sediment Wound Cartridge (SWC-XX-YYZZ) 
    Sediment Wound Cartridge (SWX-XX-YYZZ) 
    
    XX -  1.5" – 8"  Diameter
    YY - 2" – 60"  Length
    ZZ - 0.5m – 200m  Micron Rating
    
    *Special lengths and diameters within the certified range are included in the
    certification such as 2 1/4" diameter and 30 1/4" length.
[4] Sediment Bonded Cartridge (WW-SB-XXYYZZ) 
    Sediment Grooved Cartridge (WW-SG-XXYYZZ) 
    Sediment Depth Cartridge (WW-SD-XXYYZZ)
    
    WW - Internal Code AA-ZZ 
    XX - 1.5" – 8" Diameter 
    YY - 2" – 60" Length 
    ZZ - 0.5m – 200m Micron Rating
    
     *Special lengths and diameters within the certified range are included in the
    certification such as 2 1/4" diameter and 30 1/4" length.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



Facility : 1D

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components[1] [2] [G]
BF-(1)-(2)-(3)-(4) [3] CLD 23 MLTPL
HBCJ-(1)-(2) [4] CLD 23 MLTPL
HF-(1)-(2)-(3)-(4)-(5) [5] CLD 23 MLTPL
HSBJ-(1)-(SB)-(2)-(3) [6] CLD 23 MLTPL
MBF-(1)-(2)-(3) [7] CLD 23 MLTPL
MRH(S)-(1)-(2)-(3)-(BC) [8] CLD 23 MLTPL
MRH(S)-(SB)-(1)-(2)-(3) [9] CLD 23 MLTPL
SC-(1)-(SB)-(2)-(3) [6] CLD 23 MLTPL

[1] Flushing Procedure: 5 min flush with clean water.
[2] Certified for point of entry (POE) and municipal end uses.
[3] BF-(1)-(2)-(3)-(4) is denoted as follows:
    (1) Size: 1, 2, 3, 4
    (2) MOC: 304, 316, C (Carbon Steel)
    (3) Port Diameter: 1”, 2"
    (4) Cap Style: NBC (Band Clamp), N (Swing Bolt)
[4] HBCJ-(1)-(2) is denoted as follows:
    (1) Model: 40, 90, 170
    (BC) Band Clamp
    (2) MOC: 304 (blank) or 316
[5] HF-(1)-(2)-(3)-(4)-(5) is denoted as follows:
    (1) Size: E (Economy), 2 (20”), 4 (40”), 6 (60”)
    (2) Orientation: V (Vertical), H (Horizontal)
    (3) MOC: 304 or 316
    (4) Port Diameter: 2”, 3”, 4”, 6”, 8”, 12” 
    (5) Cartridge #: 3 (3), 4 (4), 7 (7), 12 (12)
[6] HSBJ-(1)-(SB)-(2)-(3) and SC-(1)-(SB)-(2)-(3) are denoted as follows:
    (1) Model: 40, 90, 170
    (SB) Swing Bolt
    (2) Cartridge #: 3, 4, 5, 8, 12, 16
    (3) MOC: 304 (blank) or 316
[7] MBF-(1)-(2)-(3) is denoted as follows:
    (1) Bag #: 2, 3, 4, 5, 6, 8, 12
    (2) MOC: 304, 316
    (3) Flange Port Diameter (IN): 3F, 4F, 6F, 8F, 10F
[8] MRH(S)-(1)-(2)-(3)-(BC) is denoted as follows:
    MRH-MOC: 304
    MRHS-MOC: 316
    (1) Cartridge #: 4, 5, 7, 12, 22, 36, 52, 85
    (2) Length: 10”, 20”, 30”, 40”
    (3) Port Diameter (IN): 2
    (BC) Band Clamp
[9] MRH(S)-(SB)-(1)-(2)-(3) is denoted as follows:
    MRH-MOC: 304
    MRHS-MOC: 316
    (SB) Swing Bolt
    (1) Bag #: 4, 5, 7, 12, 22, 36, 52, 85
    (2) Length: 10”, 20”, 30”, 40” , 50” 
    (3) Port Diameter (IN): 2 (FNPT), 3F, 4F, 6F, 8F , 10F, 12F
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Number of matching Manufacturers is 1
Number of matching Products is 25
Processing time was 0 seconds