NSF Product and Service Listings

These NSF Official Listings are current as of Friday, January 21, 2022 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0585489&Standard=061&


NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings.

 
Manek Metalcraft 
3430, Near Mahavir Circle
Phase 3, Dared 
Jamnagar, Gujarat 361004 
India 
91 931 6565101
Visit this company's website


Facility : Jamnagar, Gujarat, India

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[1]
COMPRESSION MALE BRANCH TEE FORGED 3/16x1/8" - 3/4x3/4" C. HOT BRASS
SINGLE HOSE BARB TO INVERTED FLARE 5/16x1/4"-3/8x3/8" C. HOT BRASS
45° FEMALE ELBOW BAR STOCK 1/8" - 3/4" C. HOT BRASS
45° STREET ELBOW BAR STOCK 1/8" - 3/4" C. HOT BRASS
45° STREET ELBOW FORGED 1/8" - 3/4" C. HOT BRASS
90° FPT ELBOW BAR STOCK 1/8" - 1/2" x 3/8" C. HOT BRASS
90° FPT ELBOW FORGED 1/8" - 1" C. HOT BRASS
90° MALE ELBOW BAR STOCK 1/8" - 1/2" x 3/8" C. HOT BRASS
90° MALE ELBOW FORGED 1/8" - 1/2" C. HOT BRASS
90° MALE REDUCING ELBOW FORGED 1/4x1/8" - 1/2x 3/8" C. HOT BRASS
90° REDUCING STREET ELBOW FORGED 1/8x1/16" -1/2x3/8" C. HOT BRASS
90° STREET ELBOW FORGED 1/8" - 3/4" C. HOT BRASS
ADAPTER 1/8x1/8"-3/4x3/4" C. HOT BRASS
BRANCH TEE BAR STOCK 1/8" - 3/4" C. HOT BRASS
BRANCH TEE FORGED 1/8" - 3/4" C. HOT BRASS
CLOSE NIPPLE 1/8" - 3/4" C. HOT BRASS
COMPRESSION 45° ELBOW FORGED 3/16x1/8" - 5/8x1/2" C. HOT BRASS
COMPRESSION ADAPTER TEE FORGED 1/8x¼x¼" - 3/8x¼x¼" C. HOT BRASS
COMPRESSION BULK HEAD UNION 1/4" - 1/2" C. HOT BRASS
COMPRESSION BULKHEAD NUTS 1/4" - 1/2" C. HOT BRASS
COMPRESSION CAP 1/4" - 5/8" C. HOT BRASS
COMPRESSION CAP NUT 1/8" - 1" C. HOT BRASS
COMPRESSION CAPTIVE SLEEVE NUT 1/8" - 1" C. HOT BRASS
COMPRESSION COUPLER/FEMALE CONNECTOR 1/8x1/8" - 7/8x3/4" C. HOT BRASS
COMPRESSION COUPLER/FEMALE CONNECTOR WITH CAPTIVE NUT SLEEVE 1/8x1/8" - 3/8x1/4" C. HOT BRASS
COMPRESSION DRILLED THRU UNION - NO STOP 3/8" - 7/8" C. HOT BRASS
COMPRESSION FEMALE BRANCH TEE FORGED 1/4x1/8" - 5/8x1/8" C. HOT BRASS
COMPRESSION FEMALE ELBOW BAR STOCK 1/8x1/8" - 3/4x1/2" C. HOT BRASS
COMPRESSION FEMALE ELBOW FORGED 1/8x1/8" - 3/4x1/2" C. HOT BRASS
COMPRESSION FORGED TEE 1/4" x 1/8" x 1/8" C. HOT BRASS
COMPRESSION INSERT 1/8" - 3/4" C. HOT BRASS
COMPRESSION LONG NUT 1/8" - 3/4" C. HOT BRASS
COMPRESSION MALE ADAPTER WITH CAPTIVE NUT SLEEVE 1/8x1/8" - 1/2x1/2" C. HOT BRASS
COMPRESSION MALE BRANCH TEE BAR STOCK 3/16x1/8" - 3/4x3/4" C. HOT BRASS
COMPRESSION MALE BRANCH TEE FORGED WITH CAPTIVE NUT SLEEVE 1/4x1/8" - 3/8x1/4" C. HOT BRASS
COMPRESSION MALE CONNECTOR 1/8x1/16" - 1x1" C. HOT BRASS
COMPRESSION MALE ELBOW BAR STOCK 1/8x1/16" - 7/8x3/4" C. HOT BRASS
COMPRESSION MALE ELBOW BAR STOCK WITH CAPTIVE NUT SLEEVE 1/8x1/8" - 1/2x1/2" C. HOT BRASS
COMPRESSION MALE ELBOW FORGED 1/8x1/16" - 7/8x3/4" C. HOT BRASS
COMPRESSION MALE ELBOW FORGED WITH CAPTIVE NUT SLEEVE 1/8x1/8" - 1/2x1/2" C. HOT BRASS
COMPRESSION MALE RUN TEE FORGED 1/8x1/8" - 3/4x1/2" C. HOT BRASS
COMPRESSION PLUG 1/4" - 5/8" C. HOT BRASS
COMPRESSION REDUCING ELBOW FORGED 3/8x1/4" - 5/8x3/8" C. HOT BRASS
COMPRESSION REDUCING TEE FORGED 1/4x1/8" - 5/8x1/2" C. HOT BRASS
COMPRESSION REDUCING UNION 1/4x1/8" - 7/8x5/8" C. HOT BRASS
COMPRESSION SLEEVE/FERRULE 1/8" - 1" C. HOT BRASS
COMPRESSION TANK ADAPTER DRILLED THRU -NO STOP 1/4x1/8" - 5/8x1/2" C. HOT BRASS
COMPRESSION TEE BAR STOCK 1/8" - 7/8" C. HOT BRASS
COMPRESSION TEE FORGED 1/8" - 7/8" C. HOT BRASS
COMPRESSION TEE FORGED WITH CAPTIVE NUT SLEEVE 3/16" - 3/8" C. HOT BRASS
COMPRESSION UNION 1/8" - 1" C. HOT BRASS
COMPRESSION UNION ELBOW BAR STOCK 1/8" - 7/8" C. HOT BRASS
COMPRESSION UNION ELBOW FORGED 1/8" - 7/8" C. HOT BRASS
COMPRESSION UNION WITH CAPTIVE NUT SLEEVE 1/8" - 1/2" C. HOT BRASS
COUNTER-SUNK PLUG 1/16" - 3/4" C. HOT BRASS
COUPLING 1/16" - 1" C. HOT BRASS
CROSS - FPT BAR STOCK 1/8" - 3/4" C. HOT BRASS
CROSS - FPT FORGED 1/8" - 1/2" C. HOT BRASS
DOUBLE COMPRESSION THREADED NUT 1/8" - 3/4" C. HOT BRASS
DOUBLE MINI HOSE BARB ELBOW 90° FOR PLASTIC TUBING 1/4" - 3/8" C. HOT BRASS
DOUBLE MINI HOSE BARB TO MPT FOR PLASTIC TUBING 1/4x1/8" - 3/8x1/4" C. HOT BRASS
DOUBLE MINI HOSE BARB UNION TEE FOR PLASTIC TUBING 1/4" - 3/8" C. HOT BRASS
FACE BUSHING 1/4"x1/8 - 1"x3/4" C. HOT BRASS
GARDEN HOSE FITTING COUPLING SETS - 2" SHANK HOSE X FGH 1/2" - 1" C. HOT BRASS
GARDEN HOSE FITTING COUPLING SETS - SHORT SHANK W/HEX NUT 1/2" - 3/4" C. HOT BRASS
GARDEN HOSE FITTING COUPLING SETS - SHORT SHANK WITH KNURLED NUT HOSE BARB 1/2" - 3/4" C. HOT BRASS
GARDEN HOSE FITTING FEMALE END ONLY - SHORT SHANK W/ HEX HOSE X FGH 1/2x3/4" - 3/4x3/4" C. HOT BRASS
GARDEN HOSE FITTING FEMALE SWIVEL ONLY - 2" SHANK HOSE BARB X FGH 1/2" x 3/4" - 1" x1" C. HOT BRASS
GARDEN HOSE FITTING MALE END ONLY - 2" SHANK HOSE BARB X MGH 1/2" x 3/4" - 1" x1" C. HOT BRASS
GARDEN HOSE FITTING MALE END ONLY - SHORT SHANK HOSE BARB X MGH 1/2x3/4" - 3/4x3/4" C. HOT BRASS
GARDEN HOSE FITTING NPSM FEMALE LONG SHANK HOSE ID X NPSM THREAD 1/2 x 1/2" - 1 x 1" C. HOT BRASS
GARDEN HOSE FITTING NPSM FEMALE SHORT SHANK HOSE ID X NPSM THREAD 1/2 x 3/4" - 1 x 1" C. HOT BRASS
GARDEN HOSE FITTING NPSM LONG SHANK SETS 1/2" - 1" C. HOT BRASS
GARDEN HOSE FITTING NPSM MALE LONG SHANK HOSE ID X NPSM THREAD 1/2 x 1/2" - 1 x 1" C. HOT BRASS
GARDEN HOSE FITTING NPSM MALE SHORT SHANK HOSE ID X NPSM THREAD 1/2 x 3/4" - 1 x 1" C. HOT BRASS
GARDEN HOSE FITTING NPSM SHORT SHANK SETS 1/2" - 1" C. HOT BRASS
GARDEN HOSE FITTINGS 3/8" COMP 3/4" FGH DISHWASHER 90° ELBOW BODY ONLY 3/4" x 3/8" C. HOT BRASS
GARDEN HOSE FITTINGS 3/8" COMP 3/4" FGH DISHWASHER 90° ELBOW W/NUT&SLEEVE 3/4" x 3/8" C. HOT BRASS
GARDEN HOSE FITTINGS CAP BAR STOCK 3/4" C. HOT BRASS
GARDEN HOSE FITTINGS CAP FORGED 3/4" C. HOT BRASS
GARDEN HOSE FITTINGS COMPRESSION X FGH SWIVEL 1/4x3/4" - 3/8x3/4" C. HOT BRASS
GARDEN HOSE FITTINGS COUPLING 3/8" - 1" C. HOT BRASS
GARDEN HOSE FITTINGS FEMALE SWIVEL HOSE BARB X FGH 3/8 x 3/4" - 1 x 1" C. HOT BRASS
GARDEN HOSE FITTINGS FEMALE SWIVEL ONLY-SHORT SHANK KNURLED NUT HOSE BARBXFGH 1/4x3/4" - 3/4x3/4" C. HOT BRASS
GARDEN HOSE FITTINGS GARDEN HOSE NUT 3/4" C. HOT BRASS
GARDEN HOSE FITTINGS HOSE "Y" CONNECTOR 3/4" C. HOT BRASS
GARDEN HOSE FITTINGS HOSE MENDERS - SOLID BARB X BARB 1/2" - 1" C. HOT BRASS
GARDEN HOSE FITTINGS MALE END ONLY HOSE BARB X MGH 3/8 x 3/4" - 1 x 1" C. HOT BRASS
GARDEN HOSE FITTINGS MALE FLARE X FGH RIGID 3/8x3/4" - 5/8x3/4" C. HOT BRASS
GARDEN HOSE FITTINGS MALE FLARE X FGH SWIVEL 1/4x3/4" - 1/2x3/4" C. HOT BRASS
GARDEN HOSE FITTINGS PLUG 3/4" C. HOT BRASS
GARDEN HOSE FITTINGS RIGID - FGH X FEMALE PIPE 3/4x1/8" - 3/4x3/4" C. HOT BRASS
GARDEN HOSE FITTINGS RIGID - FGH X MALE PIPE 3/4x3/8" - 3/4x3/4" C. HOT BRASS
GARDEN HOSE FITTINGS RIGID - MGH X FEMALE PIPE 3/4"x3/8" - 3/4"x1" C. HOT BRASS
GARDEN HOSE FITTINGS RIGID - MGH X MALE PIPE 3/4"x3/8" - 3/4"x1" C. HOT BRASS
GARDEN HOSE FITTINGS RIGID - MGH X MGH 3/4"x3/4" - 1"x3/4" C. HOT BRASS
GARDEN HOSE FITTINGS SWIVEL - FGH X FEMALE PIPE 3/4x1/2" - 3/4x3/4" C. HOT BRASS
GARDEN HOSE FITTINGS SWIVEL - FGH X FGH 3/4" - 3/4" C. HOT BRASS
GARDEN HOSE FITTINGS SWIVEL - FGH X MALE PIPE 3/4x1/4" - 3/4x3/4" C. HOT BRASS
GARDEN HOSE FITTINGS SWIVEL - MGH X FGH 3/4" - 3/4" C. HOT BRASS
GARDEN HOSE FITTINGS SWIVEL/W - FGH X MALE PIPE 3/4x1/4" - 3/4x1/2" C. HOT BRASS
HEX BUSHING 1/8" - 1/16" x 3/4" C. HOT BRASS
HEX HEAD PLUG DRILLED 1/16" - 1" C. HOT BRASS
HEX HEAD PLUG SOLID 1/16" - 1" C. HOT BRASS
HEX NIPPLE 1/16" - 1" C. HOT BRASS
HOSE BARB BALL SEAT TO ST. FEMALE PIPE SWIVEL 1/8x1/8" - 3/4x3/4" C. HOT BRASS
HOSE BARB CROSSES 1/4" - 3/8" C. HOT BRASS
HOSE BARB ELBOW 90° FORGED 1/8x1/8" - 3/4x3/4" C. HOT BRASS
HOSE BARB TEE FORGED 1/8" - 3/4" x 1/2" C. HOT BRASS
HOSE BARB TO 37° JIC FLARE SWIVEL 1/4"x3/8" - 1"x1" C. HOT BRASS
HOSE BARB TO 45° FLARE SWIVEL 3/16x3/16"-3/4x3/4" C. HOT BRASS
HOSE BARB TO DUAL 45°/37° FLARE SWIVEL 3/16"x1/4 - 5/8x5/8" C. HOT BRASS
HOSE BARB TO FEMALE NPSM SWIVEL 1/8x1/8" - 3/4x3/4" C. HOT BRASS
HOSE BARB TO FPT 1/8x1/8" - 1 1/4x1" C. HOT BRASS
HOSE BARB TO FPT ELBOW 90° FORGED 1/4"x1/8" - 3/4x3/4" C. HOT BRASS
HOSE BARB TO MALE 45° FLARE 3/16"x1/4"-1/2"x1/2" C. HOT BRASS
HOSE BARB TO MPT 1/8x1/8" - 1 1/4x1" C. HOT BRASS
HOSE BARB TO MPT (LONG) 1/8x1/8" - 1 1/4x1" C. HOT BRASS
HOSE BARB TO MPT ELBOW 45° FORGED 1/4"x1/8" - 3/4x1/2" C. HOT BRASS
HOSE BARB TO MPT ELBOW 90° BAR STOCK 3/16 x 1/8" - 1 x 1" C. HOT BRASS
HOSE BARB TO MPT ELBOW 90° FORGED 3/16 x 1/8" - 1 x 1" C. HOT BRASS
HOSE SPLICER/MENDER 1/8" - 1" x 3/4" C. HOT BRASS
HOSE SPLICER/MENDER LONG 1/8" - 1" x 3/4" C. HOT BRASS
JIC 37° FLARE ELBOW 45° FORGED 1/4" - 3/4" C. HOT BRASS
JIC 37° FLARE ELBOW 90° FORGED 1/4" - 1" C. HOT BRASS
JIC 37° FLARE FEMALE ELBOW FORGED 1/4" - 3/8" C. HOT BRASS
JIC 37° FLARE STRAIGHT FEMALE ADAPTER 1/4"x1/8" - 3/4x3/4" C. HOT BRASS
JIC 37° FLARE STRAIGHT MALE ADAPTER 1/4"x1/8" - 1"x1" C. HOT BRASS
JIC 37° FLARE STRAIGHT TUBE UNION 1/4" - 1" C. HOT BRASS
LOCK NUT 1/8" - 3/4" C. HOT BRASS
LONG EXTENISON ADAPTERS 1/8" - 3/4" C. HOT BRASS
LONG NIPPLE 1/8x1.5"-3/4x3.5" C. HOT BRASS
LONG STREET ELLS 1/8" - 3/8" C. HOT BRASS
MALE NPT X FEMALE NPT 360° TURNING SWIVELS 1/4" x 1/4" C. HOT BRASS
MALE TEE FORGED 1/8" - 3/4" C. HOT BRASS
PEX FITTINGS ADAPTER ELBOW FEMALE SWEAT PEX 3/4" - 3/4" C. HOT BRASS
PEX FITTINGS ADAPTER ELBOW MALE SWEAT PEX 3/4" - 3/4" C. HOT BRASS
PEX FITTINGS ADAPTER ELBOW MNPT PEX 1/2"x1/2"-3/4x3/4" C. HOT BRASS
PEX FITTINGS BULLNOSE TEE ½x½x¾ -¾ x¾ x1" C. HOT BRASS
PEX FITTINGS COUPLINGS 3/8" x 3/8" - 2" C. HOT BRASS
PEX FITTINGS DROP-EAR ELBOW 1/2"x1/2"-3/4x3/4" C. HOT BRASS
PEX FITTINGS ELBOW 3/8 x 3/8" - 2 x 2" C. HOT BRASS
PEX FITTINGS FIRE ANGLED ADAPTERS FNPT PEX 3/4" x 3/4" x 1/2" C. HOT BRASS
PEX FITTINGS FIRE DROP-EAR ELBOWS FNPT PEX 3/4x1/2" - 1x1/2" C. HOT BRASS
PEX FITTINGS FIRE FEMALE ELBOWS FNPT PEX 3/4x1/2" - 1x1/2" C. HOT BRASS
PEX FITTINGS FIRE HORIZONTAL TEE FNPT PEX 3/4x3/4x1/2-1x1x1/2" C. HOT BRASS
PEX FITTINGS FIRE THREADED FEMALE ADAPTERS FNPT PEX 3/4" x 1/2" C. HOT BRASS
PEX FITTINGS FIRE VERTICAL TEE FNPT PEX 3/4x3/4x1"-1x1x1/2" C. HOT BRASS
PEX FITTINGS PLUGS 3/8" - 2" C. HOT BRASS
PEX FITTINGS POLYBUTYLENE TRANSITION COUPLINGS 3/8" - 3/4" C. HOT BRASS
PEX FITTINGS REDUCING COUPLINGS 3/8x1/2" - 2x1 1/2" C. HOT BRASS
PEX FITTINGS REDUCING ELBOW 1/2"x3/8"-3/4"x5/8" C. HOT BRASS
PEX FITTINGS REDUCING TEES 3/8x3/8x1/2-2x2x1.5" C. HOT BRASS
PEX FITTINGS SWEAT FEMALE ADAPTERS 1/2" x 1/2" -1" x 1" C. HOT BRASS
PEX FITTINGS SWEAT MALE ADAPTERS 1/2" x 1/2"-1" x 1" C. HOT BRASS
PEX FITTINGS SWIVEL ADAPTERS 3/8" x 1/2"-1" x 1" C. HOT BRASS
PEX FITTINGS SWIVEL ELBOWS 3/8"x1/2-1/2"x1/2" C. HOT BRASS
PEX FITTINGS SWIVEL TOILET CONNECTION ELBOWS 3/8"x7/8"-1/2"x7/8" C. HOT BRASS
PEX FITTINGS SWIVEL TOILET CONNECTION STRAIGHT 1/2" x 7/8" C. HOT BRASS
PEX FITTINGS TEE 3/8"x3/8"x3/8-2" C. HOT BRASS
PEX FITTINGS THREADED FEMALE ADAPTERS 1/2" x 3/4"-1" x 1" C. HOT BRASS
PEX FITTINGS THREADED MALE ADAPTERS 3/8"x1/2" - 1"x1" C. HOT BRASS
PIPE "Y" FIP X FIP 1/4" C. HOT BRASS
PIPE "Y" FIP X MIP 1/4" C. HOT BRASS
PIPE CAP 1/8" - 1" C. HOT BRASS
PIPE SWIVEL ADAPTER 1/8x1/8" - 1/2x1/2" C. HOT BRASS
PIPE UNION(3 PIECES) 1/8" - 3/4" C. HOT BRASS
REDUCER COUPLING 1/4x1/8" - 1 x3/4" C. HOT BRASS
REDUCING HEX NIPPLE 1/8" - 1/16" x 3/4" C. HOT BRASS
REDUCING TEE FORGED 1/8"x1/8"x¼-¾"x¾x½" C. HOT BRASS
SAE 45° FLARE 45° ELBOW BAR STOCK FLARExMPT 1/4"x1/8 - 3/4"x3/4" C. HOT BRASS
SAE 45° FLARE 45° ELBOW FORGED FLARExMPT 1/4"x1/8 - 3/4"x3/4" C. HOT BRASS
SAE 45° FLARE 90° FEMALE ELBOW FORGED FLARExFPT 3/16x1/8" - 3/4x3/4" C. HOT BRASS
SAE 45° FLARE 90° MALE ELBOW BAR STOCK FLARExMPT 1/8 x 1/8" - 1" x 1" C. HOT BRASS
SAE 45° FLARE 90° MALE ELBOW FORGED FLARExMPT 1/8 x 1/8" - 1" x 1" C. HOT BRASS
SAE 45° FLARE ADAPTER TEE/SERVICE TEE FORGED MPTxFPTxFLARE 1/8x1/8"x¼-¼x¼x¼" C. HOT BRASS
SAE 45° FLARE CAP 1/8" - 3/4" C. HOT BRASS
SAE 45° FLARE COPPER BONNET 3/16" - 3/4" C. HOT BRASS
SAE 45° FLARE COPPER GASKET 3/16" - 3/4" C. HOT BRASS
SAE 45° FLARE CROSS FORGED 1/4" - 1/2" C. HOT BRASS
SAE 45° FLARE EXTRA HEAVY SHORT NUT FORGED 1/4" - 5/8" C. HOT BRASS
SAE 45° FLARE FEMALE ADAPTER FLARExFPT 1/8"x1/8"-7/8"x3/4" C. HOT BRASS
SAE 45° FLARE FEMALE ADAPTER FLARExMPT 1/4x1/8" - 5/8x1/2" C. HOT BRASS
SAE 45° FLARE FEMALE UNION 1/4" - 3/4" C. HOT BRASS
SAE 45° FLARE FPT CROSS FORGED 3/8x3/8" - 1/2x1/2" C. HOT BRASS
SAE 45° FLARE LONG NUT 1/8" - 3/4" C. HOT BRASS
SAE 45° FLARE LONG NUT FORGED 1/4" - 3/4" C. HOT BRASS
SAE 45° FLARE MALE ADAPTER FLARExMPT 1/8x1/8" - 1x1" C. HOT BRASS
SAE 45° FLARE MALE BRANCH TEE FORGED FLARExMPT 3/16x1/8" - 3/4x3/4" C. HOT BRASS
SAE 45° FLARE MALE RUN TEE FORGED FLARExMPT 3/16-5/16"-3/4x3/4" C. HOT BRASS
SAE 45° FLARE MALE TO FLARE FEMALE REDUCER 1/4x3/8" - 3/4x5/8" C. HOT BRASS
SAE 45° FLARE PLUG 1/8" - 3/4" C. HOT BRASS
SAE 45° FLARE REDUCING ELBOW FORGED 3/8"x1/4"-5/8"-1/2" C. HOT BRASS
SAE 45° FLARE REDUCING SWIVEL NUT FORGED 3/8x1/4"-5/8x1/2" C. HOT BRASS
SAE 45° FLARE SHORT NUT 1/8" - 1" C. HOT BRASS
SAE 45° FLARE SHORT NUT FORGED 3/16" - 7/8" C. HOT BRASS
SAE 45° FLARE SWIVEL NUT FORGED 1/4" - 3/4" C. HOT BRASS
SAE 45° FLARE UNION 1/8" - 7/8" C. HOT BRASS
SAE 45° FLARE UNION TEE FORGED 1/8" - 7/8" C. HOT BRASS
SAE 45° REDUCING FLARE NUT FORGED 5/16"x1/4-3/4-5/8" C. HOT BRASS
SAE 45° REDUCING FLARE SHORT NUT 3/8x1/4"-5/8x1/2" C. HOT BRASS
SAE 45° REDUCING FLARE TEE FORGED ¼x¼x⅜" - ¾x¾x⅝" C. HOT BRASS
SAE 45° REDUCING FLARE UNION 1/4"x1/8-3/4"x5/8" C. HOT BRASS
SINGLE BUBBLE HOSE BARB TO MPT 3/8 x 3/8" - 1" x 1" C. HOT BRASS
SINGLE BUBBLE HOSE BARB TO MPT ELBOW BAR STOCK 3/8x1/4" - 3/4x3/4" C. HOT BRASS
SINGLE HOSE BARB TO MPT 1/8x1/8" - 3/4x3/4" C. HOT BRASS
SINGLE HOSE BARB TO MPT ELBOW 90° BAR STOCK 1/4x1/8" - 3/4x3/4" C. HOT BRASS
SINGLE MINI HOSE BARB BULKHEAD UNION FOR PLASTIC TUBING 1/4" - 1/2" C. HOT BRASS
SINGLE MINI HOSE BARB FEMALE BRANCH TEE TO FPT FOR PLASTIC TUBING 1/4" x /1/4" x 1/8" C. HOT BRASS
SINGLE MINI HOSE BARB MALE BRANCH TEE TO MPT FOR PLASTIC TUBING ¼x¼x1/8-3/8x3/8x¼" C. HOT BRASS
SINGLE MINI HOSE BARB TO FPT ADAPTER FOR PLASTIC TUBING 1/4x1/8" - 1/2x3/8" C. HOT BRASS
SINGLE MINI HOSE BARB TO FPT ELBOW 90° BAR STOCK FOR PLASTIC TUBING 1/4" - 1/8" C. HOT BRASS
SINGLE MINI HOSE BARB TO MPT ELBOW BAR STOCK FOR PLASTIC TUBING 1/8x1/4-28 -1/2x3/8" C. HOT BRASS
SINGLE MINI HOSE BARB TO MPT FOR PLASTIC TUBING 1/4x1/16" - 3/8x1/8" C. HOT BRASS
SINGLE MINI HOSE BARB UNION ELBOW FOR PLASTIC TUBING 1/4" - 1/2" C. HOT BRASS
SINGLE MINI HOSE BARB UNION FOR PLASTIC TUBING 1/4x1/4" - 3/8x3/8" C. HOT BRASS
SINGLE MINI HOSE BARB UNION TEE FOR PLASTIC TUBING 1/4" - 1/2" C. HOT BRASS
SLOTTED-HEAD PLUG 1/8" - 3/8" C. HOT BRASS
SQUARE PLUG CORED 1/8" - 1" C. HOT BRASS
SQUARE PLUG SOLID 1/8" - 1" C. HOT BRASS
STREET ELBOW LONG BAR STOCK 1/16" - 3/4" C. HOT BRASS
STREET TEE BAR STOCK 1/8" - 3/4" C. HOT BRASS
STREET TEE FORGED 1/8" - 3/4" C. HOT BRASS
STREET/MENDER ELBOW 1/16" - 3/4" C. HOT BRASS
TEE - FPT BAR STOCK 1/16" - 3/4" C. HOT BRASS
TEE - FPT FORGED 1/8" - 1" C. HOT BRASS 

[1] Only products bearing the NSF mark are Certified.

Number of matching Manufacturers is 1
Number of matching Products is 226
Processing time was 0 seconds