NSF Product and Service Listings

These NSF Official Listings are current as of Friday, December 26, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0600944&Standard=061&


NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.

 
Hydronix Water Technology 
8630 Rochester Avenue
Rancho Cucamonga, CA 91730 
United States 
909-527-6996
Visit this company's website


Facility : 3C

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components[1] [2] [G]
Sediment Bonded Cartridge (SBC-XXYYZZ) [3] CLD 23 PP
Sediment Bonded Cartridge (SBX-XXYYZZ) [3] CLD 23 PP
Sediment Bonded Cartridge (WW-SBXXYYZZ) [4] CLD 23 PP
Sediment Depth Cartridge (SDC-XXYYZZ) [3] CLD 23 PP
Sediment Depth Cartridge (SDX-XXYYZZ) [3] CLD 23 PP
Sediment Depth Cartridge (WW-SDXXYYZZ) [4] CLD 23 PP
Sediment Grooved Cartridge (SGC-XXYYZZ) [3] CLD 23 PP
Sediment Grooved Cartridge (SGX-XXYYZZ) [3] CLD 23 PP
Sediment Grooved Cartridge (WW-SGXXYYZZ) [4] CLD 23 PP
Sediment Wound Cartridge (SWC-XXYYZZ) [3] CLD 23 PP
Sediment Wound Cartridge (SWX-XXYYZZ) [3] CLD 23 PP 

[1] Certified for point-of-entry (POE) and municipal end uses.
[2] Certification does not include inner core, adapters, o-rings, gaskets, or end caps.
[3] XX - 1.5" – 8" Diameter					
    YY - 2" – 60" Length					
    ZZ - 0.5m – 200m Micron Rating					
    *Special lengths and diameters within the certified range are included in the
    certification such as 2 1/4" diameter and 30 1/4" length.
[4] WW - Internal Code AA-ZZ					
    XX - 1.5" – 8" Diameter					
    YY - 2" – 60" Length					
    ZZ - 0.5m – 200m Micron Rating					
    *Special lengths and diameters within the certified range are included in the
    certification such as 2 1/4" diameter and 30 1/4" length.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Reverse Osmosis Element[5]
BW-2521-PRO 2.5" x 21" CLD 23 MLTPL
BW-2540-PRO 2.5" x 40" CLD 23 MLTPL
BW-4021-PRO 4" x 21" CLD 23 MLTPL
BW-4040-PRO 4" x 40" CLD 23 MLTPL
BW-8040-PRO 8" x 40" CLD 23 MLTPL
HLE-4040-PRO 4" x 40" CLD 23 MLTPL
HLP-8040-PRO 8" x 40" CLD 23 MLTPL
UHLE-4040-PRO 4" x 40" CLD 23 MLTPL
XHLE-4040-PRO 4" x 40" CLD 23 MLTPL 

[5] Certified for the following minimum daily flow rates:
       BW-2521 is certified for a minimum flow of 300 gallons per day.
       BW-2540 is certified for a minimum flow of 800 gallons per day.
       BW-4021 is certified for a minimum flow of 1000 gallons per day.
       BW-4040 is certified for a minimum flow of 2600 gallons per day.
       BW-4040-LP is certified for a minimum flow of 2800 gallons per day.
       BW-8040 is certified for a minimum flow of 11500 gallons per day.
       BW-8040-LP is certified for a minimum flow of 13000 gallons per day.
    These models require the following flush:
      BW-2521 requires a 2 hour flush at a flow rate of 2.6 gallons per minute (gpm) with
    de-ionized water.
      BW-2540 requires a 2 hour flush at a flow rate of 3.7 gallons per minute (gpm) with
      BW-4021 requires a 2 hour flush at a flow rate of 8.68 gallons per minute (gpm) with
    de-ionized water.
      BW-4040 requires a 2 hour flush at a flow rate of 12.04 gallons per minute (gpm) with
    de-ionized water.
      BW-4040-LP requires a 2 hour flush at a flow rate of 12.96 gallons per minute (gpm)
    with de-ionized water.
      BW-8040 requires a 2 hour flush at a flow rate of 53.24 gallons per minute (gpm) with
    de-ionized water.
      BW-8040-LP requires a 2 hour flush at a flow rate of 60.19 gallons per minute (gpm)
    with de-ionized water.

Number of matching Manufacturers is 1
Number of matching Products is 20
Processing time was 0 seconds