NSF Product and Service Listings

[1] Follow manufacturers use instructions for backwashing after periods in ''standby'' mode.
    Certification includes modules only.
[2] 4 S10T (Part# 119035) is a 4-pack of four #119005 modules in one box.

[1] Follow manufacturers use instructions for backwashing after periods in ''standby'' mode.
    Certification includes modules only.
[2] 4 S10T (Part# 119035) is a 4-pack of four #119005 modules in one box.
[3] Certified for a minimum daily permeate generation of 8,182 L for use in public water
    treatment facilities.
[4] Product is pre-flushed at 5 gallons per minute for 2 hours with chlorine CIP wash
[5] Certified for a minimum daily flow of 40,200 L.
[6] Certified for a minimum daily flow of 668,160 liters.
[7] Product to be flushed at 160 gpm for 2 hours using Chlorine CIP to sanitize system and
    piping prior to use.
[8] Certified for a minimum daily flow of 1,357,200 liters.
[9] Product to be flushed at 325 gpm for 2 hours using Chlorine CIP to sanitize system and
    piping prior to use.
[10] B40N Module Part # 118182, 118247, 118317, 118329 is certified for a minimum daily
     permeate generation of 9,600 L.
     
     B50N-L Module Part # 118324 is certified for a minimum daily permeate generation of
     12,000 L.
     
     B50N Module Part # 118322 is certified for a minimum daily permeate generation of 12,000
     L.
     
     MBR MemRACK is certified for a minimum daily permeate generation of 9,600 L.
[11] B40N Module Part # 118182, 118247, 118317, 118329 requires a pre-service flush at 14
     liters per minute for 20 minutes using tap or influent* water.
     
     B50N-L Module Part # 118324 and B50N Module Part # 118322 require a pre-service flush at
     17 liters per minute for 20 minutes using tap or influent* water.
     
     *If using influent water for the initial flush, follow the flush by disinfecting with a
     1,000 ppm chlorine (NaOCl) solution for 2 hours followed by a 20 minute flush to waste.
[12] Certified for a minimum daily flow of 80,400 liters per day
[13] Product to be flushed at 10.3 gallon per minute for 2 hours using Chlorine CIP to
     sanitize system and piping prior to use.
[14] Product to be flushed at 20 gallon per minute for 2 hours using Chlorine CIP to sanitize
     system and piping prior to use.
[15] Product is pre-flushed for 2 hours with chlorine CIP wash to sanitize system.
[16] Certified for a minimum of 6,000 liters per day.
[17] Product to be flushed at 1.5 gallons per minute for 2 hours.