NSF Product and Service Listings
These NSF Official Listings are current as of Saturday, July 12, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0612160&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
| Danfoss A/S | |
| Nordborgvej 81 | |
| Nordborg 6430 | |
| Denmark | |
| 45 7488 2222 | |
| Visit this company's website |
Facility : Louisville, KY
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Heat Exchanger[1] |
||||
| S4A-IG | 1" - 1/4" | C. HOT | MLTPL | |
| S8A-IG | 1" - 1/4" | C. HOT | MLTPL | |
| S7A-IG | 2" | C. HOT | MLTPL | |
| S14A-IG | 2" | C. HOT | MLTPL | |
| S20A-IG | 2" | C. HOT | MLTPL | |
| S9A-IG | 2 1/2" - 3" | C. HOT | MLTPL | |
| S19A-IG | 2 1/2" - 3" | C. HOT | MLTPL | |
| S31A-IG | 2 1/2" - 3" | C. HOT | MLTPL | |
| S44A-IG | 2 1/2" - 3" | C. HOT | MLTPL | |
| S21A/22-IG | 3" - 4" | C. HOT | MLTPL | |
| S21A/22-IS | 3" - 4" | C. HOT | MLTPL | |
| S36-IG | 3" - 4" | C. HOT | MLTPL | |
| S36-IS | 3" - 4" | C. HOT | MLTPL | |
| S47-IG | 3" - 4" | C. HOT | MLTPL | |
| S47-IS | 3" - 4" | C. HOT | MLTPL | |
| S64-IG | 3" - 4" | C. HOT | MLTPL | |
| S64-IS | 3" - 4" | C. HOT | MLTPL | |
| S41A/42-IS | 6" | C. HOT | MLTPL | |
| S62/63-IS | 6" | C. HOT | MLTPL | |
| S86-IS | 6" | C. HOT | MLTPL | |
| S110-IS | 6" | C. HOT | MLTPL | |
| S43-IS | 8" - 10" | C. HOT | MLTPL | |
| S65-IS | 8" - 10" | C. HOT | MLTPL | |
| S100-IS | 8" - 10" | C. HOT | MLTPL | |
| S130-IS | 8" - 10" | C. HOT | MLTPL | |
| 152-IS | 8" - 10" | C. HOT | MLTPL | |
| S221-IS | 8" - 10" | C. HOT | MLTPL | |
| S113-IS | 10" | C. HOT | MLTPL | |
| S155-IS | 10" | C. HOT | MLTPL | |
| S81-IS | 10" | C. HOT | MLTPL | |
| S121-IS | 12" | C. HOT | MLTPL | |
| S188-IS | 12" | C. HOT | MLTPL | |
| S251-IS | 12" | C. HOT | MLTPL | |
| SDN352-IS | 14" | C. HOT | MLTPL | |
| SDN354-IS | 14" | C. HOT | MLTPL | |
| S145-IS | 16" | C. HOT | MLTPL | |
| S210-IS | 16" | C. HOT | MLTPL | |
| S315-IS | 16" | C. HOT | MLTPL | |
| S140-IS | 20" | C. HOT | MLTPL | |
| S201-IS | 20" | C. HOT | MLTPL | |
| S300-IS | 20" | C. HOT | MLTPL | |
[1] Certified for stainless steel plates, EPDM or NBR gaskets, and stainless steel 316 or
titanium connection liners only.
|
||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Number of matching Manufacturers is 1
Number of matching Products is 41
Processing time was 0 seconds
