NSF Product and Service Listings
These NSF Official Listings are current as of Tuesday, December 23, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0613405&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
| Schlumberger Technology Corporation | |
| 3600 Briarpark Drive | |
| Houston, TX 77042 | |
| United States | |
| 714-615-2529 | |
| Visit this company's website |
Facility : Garden Grove, CA
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Submersible Pumps - Pump/Motor Units[1] [G] |
||||
| REDA Series A | 3.38" | CLD 23 | MLTPL | |
| REDA Series D | 4" | CLD 23 | MLTPL | |
| REDA Series H | 5.62" | CLD 23 | MLTPL | |
| REDA Series J | 6.75" | CLD 23 | MLTPL | |
| REDA Series L | 7.25" | CLD 23 | MLTPL | |
| REDA Series M | 8.62" | CLD 23 | MLTPL | |
| REDA Series N | 9.5", 10" | CLD 23 | MLTPL | |
| REDA Series P | 11.25" | CLD 23 | MLTPL | |
| REDA Series S | 5.38" | CLD 23 | MLTPL | |
[1] Pump Nomenclature:
XN#### A-B-C or X####N A-B-C
X: Pump Series (A:338 Series, D: 387/400 Series, S: 538 Series, H: 562 Series, J: 675
Series, L: 725 Series, M:862 Series, N: 950/1000 Series, P: 1125 Series)
####: Flow Rate
A: Stage Construction
B: Pump Configuration
C: Pump Shaft radial support options
Certification requested for a minimum flow of 7950 liters per day.
Certification does not include cables.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||
Facility : Bartlesville, OK
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Submersible Pumps - Pump/Motor Units[1] [G] |
||||
| REDA Series A | 3.38" | CLD 23 | MLTPL | |
| REDA Series D | 4" | CLD 23 | MLTPL | |
| REDA Series H | 5.62" | CLD 23 | MLTPL | |
| REDA Series J | 6.75" | CLD 23 | MLTPL | |
| REDA Series L | 7.25" | CLD 23 | MLTPL | |
| REDA Series M | 8.62" | CLD 23 | MLTPL | |
| REDA Series N | 9.5", 10" | CLD 23 | MLTPL | |
| REDA Series P | 11.25" | CLD 23 | MLTPL | |
| REDA Series S | 5.38" | CLD 23 | MLTPL | |
[1] Pump Nomenclature:
XN#### A-B-C or X####N A-B-C
X: Pump Series (A:338 Series, D: 387/400 Series, S: 538 Series, H: 562 Series, J: 675
Series, L: 725 Series, M:862 Series, N: 950/1000 Series, P: 1125 Series)
####: Flow Rate
A: Stage Construction
B: Pump Configuration
C: Pump Shaft radial support options
Certification requested for a minimum flow of 7950 liters per day.
Certification does not include cables.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||
Number of matching Manufacturers is 1
Number of matching Products is 18
Processing time was 0 seconds
