NSF Product and Service Listings

These NSF Official Listings are current as of Saturday, July 12, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0678956&Standard=061&


NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.

 
Deep Industries 
264, Gidc-II
Dediyasan 
Mehsana, GJ 384002 
India 
91 9426701994


Facility : Gujarat, India

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Coatings - Fittings[1]
DEEP SEAL LIQUID EPOXY PAINT >=4" CLD 23 EPOXY 

[1] Colors: Reddish Brown
    Number Of Coats: 1
    Maximum Field Use Dry Thickness (in mils): 20 mils
    Final Cure Time/Temperature: 7 days at 30°C
    Special Comments: Mix ratio for Base: Hardener is 3:1 by volume. Rinse coating 2-3 times
    by using distilled water prior to use.

Coatings - Pipes[1]
DEEP SEAL LIQUID EPOXY PAINT >=18" CLD 23 EPOXY 

[1] Colors: Reddish Brown
    Number Of Coats: 1
    Maximum Field Use Dry Thickness (in mils): 20 mils
    Final Cure Time/Temperature: 7 days at 30°C
    Special Comments: Mix ratio for Base: Hardener is 3:1 by volume. Rinse coating 2-3 times
    by using distilled water prior to use.

Coatings - Pump[1]
ColorDur T300 Epoxy SF Coating >=3" CLD 23 EPOXY 

[1] Colors: Reddish Brown
    Number Of Coats: 1
    Maximum Field Use Dry Thickness (in mils): 20 mils
    Final Cure Time/Temperature: 7 days at 30°C
    Special Comments: Mix ratio for Base: Hardener is 3:1 by volume. Rinse coating 2-3 times
    by using distilled water prior to use.

Coatings - Tank[1]
ColorDur T300 Epoxy SF Coating >=1500 gal CLD 23 EPOXY 

[1] Colors: Reddish Brown
    Number Of Coats: 1
    Maximum Field Use Dry Thickness (in mils): 20 mils
    Final Cure Time/Temperature: 7 days at 30°C
    Special Comments: Mix ratio for Base: Hardener is 3:1 by volume. Rinse coating 2-3 times
    by using distilled water prior to use.

Coatings - Valve[1]
ColorDur T300 Epoxy SF Coating >=3" CLD 23 EPOXY 

[1] Colors: Reddish Brown
    Number Of Coats: 1
    Maximum Field Use Dry Thickness (in mils): 20 mils
    Final Cure Time/Temperature: 7 days at 30°C
    Special Comments: Mix ratio for Base: Hardener is 3:1 by volume. Rinse coating 2-3 times
    by using distilled water prior to use.

Number of matching Manufacturers is 1
Number of matching Products is 5
Processing time was 0 seconds