NSF Product and Service Listings

These NSF Official Listings are current as of Friday, December 26, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0706673&Standard=061&


NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.

 
Sanyu Rec Co., Ltd. 
3-5-1 Doucho
Takatsuki, Ôsaka [Osaka] 
569-8558 
Japan 
81 72 669 5206
Visit this company's website


Facility : Takatsuki, Ôsaka [Osaka], Japan

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Adhesives
Urethane Resin SA-8324[1] [2] CLD 23 PUR 

[1] Mix ratio: 62.5:100 Part A:B by weight. This product must be cured for 24 hours at 23°C,
    followed by 24 hours at 60°C.
[2] Certified for a maximum surface area to volume ratio of 20 sq. in./L in spiral-wound
    filter elements with a minimum daily flow of 12,000 liters per day.

Miscellaneous Process Devices/Components
Epoxy Resin SA-8194[3] [4] CLD 23 EPOXY 

[3] Mix ratio: 100:40 Part A:B by weight. This product must be cured for 24 hours at 23°C,
    followed by 24 hours at 60°C.
[4] Certified for use as an outerwrap for reverse osmosis elements 8'' x 40'' in size with a
    minimum flow of 2,650 liters per day.

Number of matching Manufacturers is 1
Number of matching Products is 2
Processing time was 0 seconds