NSF Product and Service Listings

These NSF Official Listings are current as of Friday, December 26, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0751134&Standard=061&


NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.

 
MMP Filtration Pvt. Ltd. 
C3-602 Anushruti Tower
Nr Jain Derasar, Sg Road 
Thaltej, Ahmedabad, Gujarat 380059 
India 
91 79 26858031
Visit this company's website


Facility : Gujarat, India

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components
Lagoon Melt Blown Cartridges - PP[1] [2] CLD 23 PP
Oceanic Melt Blown Cartridges - PP[3] [2] CLD 23 PP
PEORA Melt Blown Cartridges - PP [4] CLD 23 PP 

[1] The LAGOON® Melt Blown Cartridge - PP is certified for a minimum flow rate of 1,920
    liters per day per inch of filter for use in industrial water treatment facilities only.
[2] Products are certified with the following ranges of sizes and micron ratings:
    OCEANIC® Melt Blown Cartridge - PP:
    Length: 127 mm to 1778 mm
    Width: 40 mm to 114 mm
    Micron Rating: 0.5 µ to 100 µ
    LAGOON® Melt Blown Cartridge - PP:
    Length: 127 mm to 1778 mm
    Width: 50 mm to 63 mm
    Micron Rating: 1 µ to 100 µ
    OCEANIC® Melt Blown Cartridge - PP and LAGOON® Melt Blown Cartridge - PP require a
    pre-service flush for 1 minute at a minimum of 1.5 kg/cm2 (21 psi).
[3] The OCEANIC® Melt Blown Cartridge - PP is certified for a minimum flow rate of 2,400
    liters per day per inch of filter for use in industrial water treatment facilities only.
[4] PEORA® Melt Blown Cartridge - PP:
    Length: 127 mm to 1778 mm
    Width: 40 mm to 114 mm
    Micron Rating: 0.5 µ to 100 µ



Facility : Gujarat, India

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components
Lagoon Melt Blown Cartridges - PP[1] [2] [3] CLD 23 PP
Oceanic Melt Blown Cartridges - PP[2] [4] [5] CLD 23 PP
PEORA Melt Blown Cartridges - PP [6] CLD 23 PP 

[1] The LAGOON® Melt Blown Cartridge - PP is certified for a minimum flow rate of 1,920
    liters per day per inch of filter for use in industrial water treatment facilities only.
[2] OCEANIC® Melt Blown Cartridge - PP and LAGOON® Melt Blown Cartridge - PP require a
    pre-service flush for 1 minute at a minimum of 1.5 kg/cm2 (21 psi).
[3] Products are certified with the following ranges of sizes and micron ratings:
    LAGOON® Melt Blown Cartridge - PP:
    Length: 127 mm to 1778 mm
    Width: 50 mm to 63 mm
    Micron Rating: 1 µ to 100 µ
[4] The OCEANIC® Melt Blown Cartridge - PP is certified for a minimum flow rate of 2,400
    liters per day per inch of filter for use in industrial water treatment facilities only.
[5] Products are certified with the following ranges of sizes and micron ratings:
    OCEANIC® Melt Blown Cartridge - PP:
    Length: 127 mm to 1778 mm
    Width: 40 mm to 114 mm
    Micron Rating: 0.5 µ to 100 µ
[6] PEORA® Melt Blown Cartridge - PP:
    Length: 127 mm to 1778 mm
    Width: 40 mm to 114 mm
    Micron Rating: 0.5 µ to 100 µ

Number of matching Manufacturers is 1
Number of matching Products is 6
Processing time was 0 seconds