NSF Product and Service Listings

These NSF Official Listings are current as of Friday, December 26, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0760815&Standard=061&


NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.

 
Allied Group 
7200 Mykawa Road
Houston, TX 77033 
United States 
713-799-1100
Visit this company's website


Facility : Houston, TX

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings
Fittings [1] [2] [3] CLD 23 SS 

[1] Fittings can be welded or seamless, and come in the following configurations and
    corresponding sizes:
     - 3R Elbow: 90°, 60°, 45°, 30°.       
       - 90° and 45°: 3/4" - 60"       
       - 60° and 30°: 16"-60"
    - Long Radius Elbow: 90°C and 45°. All 1/2" - 60". 
    - Long Radius Return: 1/2" - 24". 
    - Short Radius Elbow: 1" – 24" 
    - Short radius 180° Return: 1" – 24" 
    - Long Radius Reducing Elbow: 2" x 1 1/2" – 24" x 12" 
    - Tee: 1/2" - 60" 
    - Cross: 1/2" - 60" 
    - Reducing Tee: 1/2" x 1/2" x 3/8" – 60" x 60" x 30" 
    - Concentric Reducer: 3/4" x 1/2" – 60" x 30" 
    - Eccentric Reducer: 3/4" x 1/2" – 60" x 30" 
    - Cap: 1/2" - 60" 
    - Stub Ends: 1/2" - 60"
    - Pipe Nipples: ½” – 4” (maximum length 12”)
[2] Forged and cast fittings can come in the following configurations and corresponding
    sizes: 
    - Cross: 1/8" – 4" 
    - Tee: 1/8" – 4" 
    - 90° Elbow: 1/8" – 4" 
    - 45° Elbow: 1/8" – 4" 
    - Coupling: 1/8" – 4" 
    - Half-coupling: 1/8" – 4" 
    - Boss: 1/8" – 4" 
    - Cap: 1/8" – 4" 
    - Couplet: 1/8" – 4" 
    - Threaded Street Elbows: 1/8" – 2" 
    - Square head plug: 1/8" – 4" 
    - Hex head plug: 1/8" – 4" 
    - Round head plug: 1/8" – 4" 
    - Hex head bushing: 1/8" – 4" 
    - Flush bushing: 1/8" – 4"
[3] Flanges come in the following configurations and range in 0.5-96" diameter:
    - Threaded
    - Slip-on
    - Socket weld
    - Lap joint
    - Blind
    - Welding neck

Pipe
Seamless Pipe 1/2" - 96" CLD 23 SS 

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


Facility : Missouri City, TX

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings
Fittings [1] [2] [3] CLD 23 SS 

[1] Fittings can be welded or seamless, and come in the following configurations and
    corresponding sizes:
     - 3R Elbow: 90°, 60°, 45°, 30°.       
       - 90° and 45°: 3/4" - 60"       
       - 60° and 30°: 16"-60"
    - Long Radius Elbow: 90°C and 45°. All 1/2" - 60". 
    - Long Radius Return: 1/2" - 24". 
    - Short Radius Elbow: 1" – 24" 
    - Short radius 180° Return: 1" – 24" 
    - Long Radius Reducing Elbow: 2" x 1 1/2" – 24" x 12" 
    - Tee: 1/2" - 60" 
    - Cross: 1/2" - 60" 
    - Reducing Tee: 1/2" x 1/2" x 3/8" – 60" x 60" x 30" 
    - Concentric Reducer: 3/4" x 1/2" – 60" x 30" 
    - Eccentric Reducer: 3/4" x 1/2" – 60" x 30" 
    - Cap: 1/2" - 60" 
    - Stub Ends: 1/2" - 60"
    - Pipe Nipples: ½” – 4” (maximum length 12”)
[2] Forged and cast fittings can come in the following configurations and corresponding
    sizes: 
    - Cross: 1/8" – 4" 
    - Tee: 1/8" – 4" 
    - 90° Elbow: 1/8" – 4" 
    - 45° Elbow: 1/8" – 4" 
    - Coupling: 1/8" – 4" 
    - Half-coupling: 1/8" – 4" 
    - Boss: 1/8" – 4" 
    - Cap: 1/8" – 4" 
    - Couplet: 1/8" – 4" 
    - Threaded Street Elbows: 1/8" – 2" 
    - Square head plug: 1/8" – 4" 
    - Hex head plug: 1/8" – 4" 
    - Round head plug: 1/8" – 4" 
    - Hex head bushing: 1/8" – 4" 
    - Flush bushing: 1/8" – 4"
[3] Flanges come in the following configurations and range in 0.5-96" diameter:
    - Threaded
    - Slip-on
    - Socket weld
    - Lap joint
    - Blind
    - Welding neck

Pipe
Seamless Pipe 1/2" - 96" CLD 23 SS 

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.
Number of matching Manufacturers is 1
Number of matching Products is 4
Processing time was 0 seconds